HardwareRenderer

SYNC_CONTEXT_IS_STOPPED

 public static final int SYNC_CONTEXT_IS_STOPPED

The hardware renderer has been set to a "stopped" state. If this is returned then the rendering content has been synced, however a frame was not produced.

Constant Value: 4 (0x00000004)

SYNC_FRAME_DROPPED

 public static final int SYNC_FRAME_DROPPED

The content was synced but the renderer has declined to produce a frame in this vsync interval. This can happen if a frame was already drawn in this vsync or if the renderer is outrunning the frame consumer. The renderer will internally re-schedule itself to render a frame in the next vsync signal, so the caller does not need to do anything in response to this signal.

Constant Value: 8 (0x00000008)

SYNC_LOST_SURFACE_REWARD_IF_FOUND

 public static final int SYNC_LOST_SURFACE_REWARD_IF_FOUND

The hardware renderer no longer has a valid Surface to render to. This can happen if Surface.release() was called. The user should no longer attempt to call syncAndDraw until a new surface has been provided by calling setSurface.

Spoiler: the reward is GPU-accelerated drawing, better find that Surface!

Constant Value: 2 (0x00000002)

SYNC_OK

 public static final int SYNC_OK

Nothing interesting to report. Sync & draw kicked off

Constant Value: 0 (0x00000000)

SYNC_REDRAW_REQUESTED

 public static final int SYNC_REDRAW_REQUESTED

The renderer is requesting a redraw. This can occur if there's an animation that's running in the RenderNode tree and the hardware renderer is unable to self-animate.

If this is returned from syncAndDraw the expectation is that syncAndDraw will be called again on the next vsync signal.

Constant Value: 1 (0x00000001)

HardwareRenderer

 public HardwareRenderer ()

Creates a new instance of a HardwareRenderer. The HardwareRenderer will default to opaque with no light source configured.

clearContent

 public void clearContent ()

Destroys all the display lists associated with the current rendering content. This includes releasing a reference to the current content root RenderNode. It will therefore be necessary to call setContentRoot(android.graphics.RenderNode) in order to resume rendering after calling this, along with re-recording the display lists for the RenderNode tree.

It is recommended, but not necessary, to use this in combination with lifecycle events such as Activity.onStop() and Activity.onStart() or in response to ComponentCallbacks2.onTrimMemory(int) signals such as ComponentCallbacks2.TRIM_MEMORY_UI_HIDDEN See also stop().

createRenderRequest

 public HardwareRenderer.FrameRenderRequest createRenderRequest ()

Returns a FrameRenderRequest that can be used to render a new frame. This is used to synchronize the RenderNode content provided by setContentRoot(android.graphics.RenderNode) with the RenderThread and then renders a single frame to the Surface set with setSurface(android.view.Surface).

destroy

 public void destroy ()

Destroys the rendering context of this HardwareRenderer. This destroys the resources associated with this renderer and releases the currently set Surface. This must be called when this HardwareRenderer is no longer needed.

The renderer may be restored from this state by setting a new Surface, setting new rendering content with setContentRoot(android.graphics.RenderNode), and resuming rendering by issuing a new FrameRenderRequest.

It is recommended to call this in response to callbacks such as SurfaceHolder.Callback.surfaceDestroyed(SurfaceHolder).

Note that if there are any outstanding frame commit callbacks they may never being invoked if the frame was deferred to a later vsync.

isDrawingEnabled

 public static boolean isDrawingEnabled ()

Returns true if HardwareRender will produce output. This value is global to the process and affects all uses of HardwareRenderer, including those created by the system such as those used by the View tree when using hardware accelerated rendering. Default is true in all production environments, but may be false in testing-focused emulators or if setDrawingEnabled(boolean) is used.

isOpaque

 public boolean isOpaque ()

Whether or not the renderer is set to be opaque. See setOpaque(boolean)

notifyFramePending

 public void notifyFramePending ()

Notifies the hardware renderer that a call to FrameRenderRequest.syncAndDraw() will be coming soon. This is used to help schedule when RenderThread-driven animations will happen as the renderer wants to avoid producing more than one frame per vsync signal.

setContentRoot

 public void setContentRoot (RenderNode content)

Sets the content root to render. It is not necessary to call this whenever the content recording changes. Any mutations to the RenderNode content, or any of the RenderNode's contained within the content node, will be applied whenever a new FrameRenderRequest is issued via createRenderRequest() and FrameRenderRequest.syncAndDraw().

setDrawingEnabled

 public static void setDrawingEnabled (boolean drawingEnabled)

Toggles whether or not HardwareRenderer will produce drawing output globally in the current process. This applies to all HardwareRenderer instances, including those created by the platform such as those used by the system for hardware accelerated View rendering. The capability to disable drawing output is intended for test environments, primarily headless ones. By setting this to false, tests that launch activities or interact with Views can be quicker with less RAM usage by skipping the final step of View drawing. All View lifecycle events will occur as normal, only the final step of rendering on the GPU to the display will be skipped. This can be toggled on and off at will, so screenshot tests can also run in this same environment by toggling drawing back on and forcing a frame to be drawn such as by calling view#invalidate(). Once drawn and the screenshot captured, this can then be turned back off.

setLightSourceAlpha

 public void setLightSourceAlpha (float ambientShadowAlpha, float spotShadowAlpha)

Configures the ambient & spot shadow alphas. This is the alpha used when the shadow has max alpha, and ramps down from the values provided to zero.

These values are typically provided by the current theme, see R.attr.spotShadowAlpha and R.attr.ambientShadowAlpha.

This must be set at least once along with setLightSourceGeometry(float, float, float, float) before shadows will work.

setLightSourceGeometry

 public void setLightSourceGeometry (float lightX, float lightY, float lightZ, float lightRadius)

Sets the center of the light source. The light source point controls the directionality and shape of shadows rendered by RenderNode Z & elevation.

The platform's recommendation is to set lightX to 'displayWidth / 2f - windowLeft', set lightY to 0 - windowTop, lightZ set to 600dp, and lightRadius to 800dp.

The light source should be setup both as part of initial configuration, and whenever the window moves to ensure the light source stays anchored in display space instead of in window space.

This must be set at least once along with setLightSourceAlpha(float, float) before shadows will work.

setName

 public void setName (String name)

Sets a name for this renderer. This is used to identify this renderer instance when reporting debug information such as the per-window frame time metrics reported by 'adb shell dumpsys gfxinfo [package] framestats'

setOpaque

 public void setOpaque (boolean opaque)

Change the HardwareRenderer's opacity. Will take effect on the next frame produced.

If the renderer is set to opaque it is the app's responsibility to ensure that the content renders to every pixel of the Surface, otherwise corruption may result. Note that this includes ensuring that the first draw of any given pixel does not attempt to blend against the destination. If this is false then the hardware renderer will clear to transparent at the start of every frame.

setSurface

 public void setSurface (Surface surface)

The surface to render into. The surface is assumed to be associated with the display and as such is still driven by vsync signals such as those from Choreographer and that it has a native refresh rate matching that of the display's (typically 60hz).

NOTE: Due to the shared, cooperative nature of the render thread it is critical that any Surface used must have a prompt, reliable consuming side. System-provided consumers such as SurfaceView, Window.takeSurface(SurfaceHolder.Callback2), or TextureView all fit this requirement. However if custom consumers are used such as when using SurfaceTexture or ImageReader it is the app's responsibility to ensure that they consume updates promptly and rapidly. Failure to do so will cause the render thread to stall on that surface, blocking all HardwareRenderer instances.

start

 public void start ()

Resumes rendering into the surface. Any pending rendering requests will produce a new frame at the next vsync signal.

This is useful in combination with lifecycle events such as Activity.onStart(). See stop() for stopping rendering.

stop

 public void stop ()

Hard stops rendering into the surface. If the renderer is stopped it will block any attempt to render. Calls to FrameRenderRequest.syncAndDraw() will still sync over the latest rendering content, however they will not render and instead SYNC_CONTEXT_IS_STOPPED will be returned.

This is useful in combination with lifecycle events such as Activity.onStop(). See start() for resuming rendering.