Fpga 06-data-types-system-tasks-compiler-directives

Fpga 06-data-types-system-tasks-compiler-directives

• 1.
  ENGR. RASHID FARIDCHISHTI LECTURER,DEE, FET, IIUI CHISHTI@IIU.EDU.PK WEEK 6 DATA TYPES, SYSTEM TASKS AND COMPILER DIRECTIVES FPGA Based System Design Sunday, May 17, 2015 1 www.iiu.edu.pk
• 2.
   Parameters: Verilogallows constants to be defined in a module by the keyword parameter. Parameters cannot be used as variables. parameter port_id = 5; // Defines a constant port_id parameter cache_line_width = 256; // Constant defines width of cache line parameter signed [15:0] WIDTH; // Fixed sign and range for parameter // WIDTH Module definitions may be written in terms of parameters.  Hardcoded numbers should be avoided. Parameters values can be changed at module instantiation or by using the defparam statement, Thus, the use of parameters makes the module definition flexible. Module behavior can be altered simply by changing the value of a parameter.  In Verilog HDL localparam keyword is used to define parameters when their values should not be changed.  For example, the state encoding for a state machine can be defined using localparam. The state encoding cannot be changed. localparam state1 = 4'b0001, state2 = 4'b0010, state3 = 4'b0100, state4 = 4'b1000; www.iiu.edu.pk Sunday, May 17, 2015 Data Types in Verilog (11) 2
• 3.
   Strings: Stringscan be stored in reg. The width of the register variables must be large enough to hold the string. Each character in the string takes up 8 bits.  If the width of the register is greater than the size of the string, Verilog fills bits to the left of the string with zeros.  If the register width is smaller than the string width, Verilog truncates the leftmost bits of the string reg [8*18:1] string_value; // Declare a variable that is 18 bytes wide initial string_value = "Hello Verilog World"; // String can be stored  Special characters serve a special purpose in displaying strings, such as newline, tabs, and displaying argument values. Special characters can be displayed in strings only when they are preceded by escape characters www.iiu.edu.pk Sunday, May 17, 2015 Data Types in Verilog (12) 3 Escaped Characters Character Displayed Escaped Characters Character Displayed n Newline t Tab %% % " '' ooo 3 octal digits
• 4.
   System Tasks:Verilog provides standard system tasks for certain routine operations. All system tasks appear in the form $<keyword>. Operations such as displaying on the screen, monitoring values of nets, stopping, and finishing are done by system tasks.  $display: is the main system task for displaying values of variables or strings or expressions. Usage: $display(p1, p2, p3,....., pn); p1, p2, p3,..., pn can be quoted strings or variables or expressions. $display is very similar to printf in C.  A $display inserts a newline at the end of the string by default. A $display without any arguments produces a newline. Format Display %d or %D Display variable in decimal %b or %B Display variable in binary %s or %S Display string %h or %H Display variable in hex %c or %C Display ASCII character %m or %M Display hierarchical name (no argument required) www.iiu.edu.pk Sunday, May 17, 2015 System Tasks (1) 4
• 5.
  Format Display %v or%V Display strength %o or %O Display variable in octal %t or %T Display in current time format %e or %E Display real number in scientific format (e.g., 3e10) %f or %F Display real number in decimal format (e.g., 2.13) %g or %G Display real number in scientific or decimal, whichever is shorter Example : $display Task $display("Hello Verilog World"); -- Hello Verilog World $display($time); // Display value of current simulation time 230 -- 230 // Display value of 41-bit virtual address 1fe0000001c at time 200 reg [0:40] v_addr; $display("At time %d virtual address is %h", $time, v_addr); -- At time 200 virtual address is 1fe0000001cwww.iiu.edu.pk Sunday, May 17, 2015 System Tasks (2) 5
• 6.
  // Display valueof port_id 5 in binary reg [4:0] port_id; $display("ID of the port is %b", port_id); -- ID of the port is 00101 // Display value of 4-bit bus 10xx (signal contention) in binary reg [3:0] bus; $display("Bus value is %b", bus); -- Bus value is 10xx // Display the hierarchical name of instance p1 instantiated under // the highest-level module called top. No argument is required. This // is a useful feature) $display("This string is displayed from %m level of hierarchy"); -- This string is displayed from top.p1 level of hierarchy // Display special characters, newline and % $display ("This is a n multiline string with a %% sign"); -- This is a -- multiline string with a % sign www.iiu.edu.pk Sunday, May 17, 2015 System Tasks (3) 6
• 7.
   $monitor: providesa mechanism to monitor a signal when its value changes. Usage: $monitor(p1,p2,p3,....,pn); The parameters p1, p2, ... , pn can be variables, signal names, or quoted strings. $monitor continuously monitors the values of the variables or signals specified in the parameter list and displays all parameters in the list whenever the value of any one variable or signal changes. Unlike $display, $monitor needs to be invoked only once.  Only one monitoring list can be active at a time. If there is more than one $monitor statement in your simulation, the last $monitor statement will be the active statement. Two tasks are used to switch monitoring on and off.  Usage: $monitoron; $monitoroff; The $monitoron tasks enables monitoring, and the $monitoroff task disables monitoring during a simulation. Monitoring is turned on by default at the beginning of the simulation and can be controlled during the simulation with the $monitoron and $monitoroff tasks. // Monitor time and value of the signals clock and reset // Clock toggles every 5 time units and reset goes down at 10 time units initial begin $monitor ($time, " Value of signals clock = %b reset = %b", clock, reset); end www.iiu.edu.pk Sunday, May 17, 2015 System Tasks (4) 7
• 8.
   $stop: The$stop task is used whenever the designer wants to suspend the simulation and examine the values of signals in the design.  $finish: terminates the simulation. // Stop at time 100 in the simulation and examine the results // Finish the simulation at time 1000. initial // initial block executes once at time = 0 begin clock = 0; reset = 1; #100 $stop; // This will suspend the simulation at time = 100 #900 $finish; // This will terminate the simulation at time = 1000 end www.iiu.edu.pk Sunday, May 17, 2015 System Tasks (5) 8
• 9.
   `define: directiveis used to define text macros in Verilog. The Verilog compiler substitutes the text of the macro wherever it encounters a `<macro_name>.  Example // define a text macro that defines default word size 'define WORD_SIZE 32 // Used as 'WORD_SIZE in the code 'define S $stop; // define an alias. A $stop will be substituted wherever 'S appears // define a frequently used text string 'define WORD_REG reg [31:0] // you can then define a 32-bit register as 'WORD_REG reg32;  `include: allows you to include entire contents of a Verilog source file in another Verilog file during compilation // Include the file header.v, which contains declarations verilog file design.v. 'include header.v ... <Verilog code in file design.v> ... ... Two other directives, `ifdef and `timescale, are used frequently. www.iiu.edu.pk Sunday, May 17, 2015 Compiler Directives (1) 9
• 10.
   `define: directiveis used to define text macros in Verilog. The Verilog compiler substitutes the text of the macro wherever it encounters a `<macro_name>.  Example // define a text macro that defines default word size 'define WORD_SIZE 32 // Used as 'WORD_SIZE in the code 'define S $stop; // define an alias. A $stop will be substituted wherever 'S appears // define a frequently used text string 'define WORD_REG reg [31:0] // you can then define a 32-bit register as 'WORD_REG reg32;  `include: allows you to include entire contents of a Verilog source file in another Verilog file during compilation // Include the file header.v, which contains declarations verilog file design.v. 'include header.v ... <Verilog code in file design.v> ... ... Two other directives, `ifdef and `timescale, are used frequently. www.iiu.edu.pk Sunday, May 17, 2015 Compiler Directives (1) 9