Routing algorithm network layer

Guest Lecture On Routing Algorithms Nilesh U. Sambhe Assistant Professor, Department Of Computer Technology, Yeshwantrao Chavan College Of Engineering, Nagpur 1

Outline • Routing Algorithm • Shortest Path Routing • Flow Based Routing • Flooding • Distance Vector Routing • Link State Routing • Hierarchical Routing 2

Routing is the process of forwarding of a packet in a network so that it reaches its intended destination. •Correctness: The routing should be done properly and correctly so that the packets may reach their proper destination. •Simplicity: The routing should be done in a simple manner so that the overhead is as low as possible. With increasing complexity of the routing algorithms the overhead also increases. •Robustness: Once a major network becomes operative, it may be expected to run continuously for years without any failures. The algorithms designed for routing should be robust enough to handle hardware and software failures and should be able to cope with changes in the topology and traffic without requiring all jobs in all hosts to be aborted and the network rebooted every time some router goes down. Properties Of Routing Algorithm 3

• Stability: The routing algorithms should be stable under all possible circumstances. • Fairness: Every node connected to the network should get a fair chance of transmitting their packets. this is generally done on a first come first serve basis. • Optimality: The routing algorithms should be optimal in terms of throughput and minimizing mean packet delays. here there is a trade-off and one has to choose depending on his suitability. 4

Types Of Routing Algorithms • Nonadaptive (Static) • Do not use measurements of current conditions • Static routes are downloaded at boot time • Adaptive Algorithms • Change routes dynamically • Gather information at runtime • locally • from adjacent routers • from all other routers • Change routes • Every delta T seconds • When load changes • When topology changes 5

d3 > d2 as d1 + d3 > d1 + d2 I   K J Optimal path from I to K over J d1 d2 distance d1 + d2 is minimal d3 Other path from J to K Set of all optimal routes • from all sources • to a given destination is a tree: sink tree Optimality Principle 6

(A) A SUBNET. (B) A SINK TREE FOR ROUTER B. 7 • The set of optimal routes to a particular node forms a sink tree. • Sink trees are not necessarily unique. • Goal of all routing algorithms • Discover sink trees for all destinations

Dijkstra’s Algorithm A B C E F D G H 1 2 2 6 4 2 7 3 3 2 2 Each node is labeled (in parentheses) with its distance from the source node along the best known path.

(Cont’d) • We want to find the shortest path from A to D. • Initially, no paths are known, so all nodes are labeled with infinity. A B(∞,−) C(∞,−) E(∞,−) F(∞,−) D(∞,−) G(∞,−) H(∞,−)

(Cont’d) • We start out by marking node A (the working node) as permanent. • We examine each of the nodes adjacent a, relabeling each one with the distance to a. A B(2, A) C(∞,−) E(∞,−) F(∞,−) D(∞,−) G(6, A) H(∞,−) 2 6

(Cont’d) A B(2, A) C(∞,−) E(∞,−) F(∞,−) D(∞,−) G(6, A) H(∞,−) We make B with the smallest label permanent. B becomes the new working node.

(Cont’d) A B(2, A) C(9, Β) E(4, B) F(∞,−) D(∞,−) G(6, A) H(∞,−) 2 7 We examine each of the nodes adjacent B, relabeling each one with the distance to B.

(Cont’d) A B(2, A) C(9, B) E(4, B) F(∞,−) D(∞,−) G(6, A) H(∞,−) We make E with the smallest label permanent. E becomes the new working node.

E(4, B) (Cont’d) 1 2 A B(2, A) C(9, B) F(6, Ε) D(∞,−) G(5, E) H(∞,−) We examine each of the nodes adjacent E, relabeling each one with the distance to E.

(Cont’d) A B(2, A) C(9, B) E(4, B) F(6, E) D(∞,−) G(5, E) H(∞,−) We make G with the smallest label permanent. G becomes the new working node.

E(4, B) (Cont’d) 4 A B(2, A) C(9, B) F(6, E) D(∞,−) G(5, E) H(9, G) We examine each of the nodes adjacent G, relabeling each one with the distance to G.

(Cont’d) A B(2, A) C(9, B) E(4, B) F(6, E) D(∞,−) G(5, E) H(9, G) We make F with the smallest label permanent. F becomes the new working node.

E(4, B) (Cont’d) 2 A B(2, A) C(9, B) F(6, E) D(∞,−) G(5, E) H(8, F) 3 We examine each of the nodes adjacent F, relabeling each one with the distance to F.

(Cont’d) A B(2, A) C(9, B) E(4, B) F(6, E) D(∞,−) G(5, E) H(8, F) We make H with the smallest label permanent. H becomes the new working node.

E(4, B) (Cont’d) 2 A B(2, A) C(9, B) F(6, E) D(10, F) G(5, E) H(8, F) We examine each of the nodes adjacent H, relabeling each one with the distance to H.

(Cont’d) E(4, B) A B(2, A) C(9, B) F(6, E) D(10, F) G(5, E) H(8, F) We make C with the smallest label permanent. C becomes the new working node.

(Cont’d) E(4, B) A B(2, A) C(9, B) F(6, E) D(10, F) G(5, E) H(8, F) 3 We examine each of the nodes adjacent C, relabeling each one with the distance to C.

(Cont’d) E(4, B) A B(2, A) C(9, B) F(6, E) D(10, F) G(5, E) H(8, F) We make D with the smallest label permanent. D becomes the new working node.

(Cont’d) E(4, B) A B(2, A) C(9, B) F(6, E) D(10, H) G(5, E) H(8, F) The shortest path from A to D follows.

Flow Based Routing Algorithm 25 •It is a non-adaptive routing algorithm. •It takes into account both the topology and the load in this routing algorithm; •We can estimate the flow between all pairs of routers. •From the known average amount of traffic and the average length of a packet you can compute the mean packet delays using queuing theory. •Flow-based routing then seeks to find a routing table to minimize the average packet delay through the subnet. •Given the line capacity and the flow, we can determine the delay. It needs to use the formula for delay time T. Where, μ = Mean number of arrivals in packet/sec, 1/μ = The mean packet size in the bits, and c = Line capacity (bits/s).

Routing: Flooding • Every packet is sent out on every outgoing line except the one it arrived at • It is non adaptive algorithm. 26

• Every packet is sent out on every outgoing line except the one it arrived at • Duplicates!! How to limit? • Hop counter • Decrement in each router • Discard packet if counter is 0 • Sequence number in packet • Avoid sending the same packet a second time • Keep in each router per source a list of packets already seen • Selective flooding • Use only those lines that are going approximately in right direction 30 Routing: Flooding

Routing: Distance Vector • Adaptive algorithm • Exchange of info only with neighbours • Data to be available in each router • Routing table: per destination • Distance • Outgoing line • Distance to all neighbours 31

ROUTING: DISTANCE VECTORRouting table for A To cost via A 0 - B 12 B C 25 B D 40 B E 14 E F 23 E G 18 B H 17 J I 21 E J 9 J K 24 J L 29 J 32

• Algorithm • At each step within a router: • Get routing tables from neighbours • Compute distance to neighbours • Compute new routing table 33

ROUTING: DISTANCE VECTORRouting tables from 34

Better? • Keep 4 tables (one for each neighbour) • Use shortest path 35

Count To Infinity Problem Good news: • A comes up again Only distances to A Faster not possible!!! 36

Bad news: • A goes down B receives: • Distance ∞ from A • Distance 2 from C New distance from B to A: 3 via C 37

Bad news: • A goes down C still • believes its distance to A is 2 • routes via B B routes its packets for A via C 38

Routing: Link State • Each router must • Discover its neighbours and learn their network addresses • Measure the delay or cost to each of its neighbours • Construct a packet with these distances • Send this packet to all other routers • Compute the shortest path to every other router 40

41 Discovering your neighbors • Send “hello” packet on each point-to-point line. Destination node replies with its address.

42 Measuring line cost • Send an “ECHO” packet over the line. • Destination is required to respond to “echo” packet immediately. • Measure the time required for this operation.

Building link state packets • Packet containing: • Identity of sender • Sequence number + age • For each neighbour: name + distance 43

Age in each packet: • Decremented during flooding, while used in router • Age 0  info discarded 44 • Flooding • Each router records the (source, seq. No.) • Only flood and record packets from a source with higher seq.No. Than previously recorded. • Sequence numbers or router records of them can get corrupt. • Include age after seq. No. And decrement it per second. Discard packets with age zero. Distributing the link state packets

Computing new routes • With a full set of link state packets, a router can: • Construct the entire subnet graph • Run Dijkstra's algorithm to compute the shortest path to each destination • Problems for large subnets • Memory to store data • Compute time 45

Hierarchical Routing • When network size increases… • Larger stables • More CPU time needed to compute … • More bandwidth needed. 46 The Solution is to •Routers grouped in regions •Each routers knows how to reach: • Other routers in its own group • Other regions

Routing algorithm network layer

More Related Content

What's hot

Similar to Routing algorithm network layer

Recently uploaded

In this document

Routing algorithm network layer