diff options
Diffstat (limited to 'po')
| -rw-r--r-- | po/plainbox-provider-checkbox.pot | 1485 |
1 files changed, 1324 insertions, 161 deletions
diff --git a/po/plainbox-provider-checkbox.pot b/po/plainbox-provider-checkbox.pot index 0b35b89b..45500d30 100644 --- a/po/plainbox-provider-checkbox.pot +++ b/po/plainbox-provider-checkbox.pot @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2016-01-21 17:48+0800\n" +"POT-Creation-Date: 2016-03-07 14:59+0800\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n" "Language-Team: LANGUAGE <LL@li.org>\n" @@ -18,7 +18,7 @@ msgstr "" "Content-Transfer-Encoding: 8bit\n" #. description -#: ../jobs/audio.txt.in:9 +#: ../jobs/audio.txt.in:9 ../units/dock.pxu:108 msgid "Test to detect audio devices" msgstr "" @@ -50,7 +50,7 @@ msgid "" msgstr "" #. verification -#: ../jobs/audio.txt.in:63 +#: ../jobs/audio.txt.in:63 ../units/dock.pxu:133 msgid " Did you hear the sound from the HDMI device?" msgstr "" @@ -68,7 +68,7 @@ msgid "" msgstr "" #. verification -#: ../jobs/audio.txt.in:90 +#: ../jobs/audio.txt.in:90 ../units/dock.pxu:159 msgid " Did you hear the sound from the DisplayPort device?" msgstr "" @@ -152,7 +152,7 @@ msgid "" msgstr "" #. description -#: ../jobs/audio.txt.in:249 +#: ../jobs/audio.txt.in:249 ../units/dock.pxu:221 msgid "" "Collect audio-related system information. This data can be used to simulate " "this computer's audio subsystem and perform more detailed tests under a " @@ -160,7 +160,7 @@ msgid "" msgstr "" #. description -#: ../jobs/audio.txt.in:260 +#: ../jobs/audio.txt.in:260 ../units/dock.pxu:232 msgid "Attaches the audio hardware data collection log to the results." msgstr "" @@ -811,17 +811,17 @@ msgid "Test if the winbindd daemon is running when the package is installed." msgstr "" #. description -#: ../jobs/disk.txt.in:12 +#: ../jobs/disk.txt.in:7 msgid "Displays information about each disk detected on the system under test." msgstr "" #. summary -#: ../jobs/disk.txt.in:26 +#: ../jobs/disk.txt.in:21 msgid "Disk statistics for /dev/{name}" msgstr "" #. description -#: ../jobs/disk.txt.in:27 +#: ../jobs/disk.txt.in:22 msgid "" "This test checks disk stats, generates some activity and rechecks stats to " "verify they've changed. It also verifies that disks appear in the various " @@ -829,12 +829,12 @@ msgid "" msgstr "" #. description -#: ../jobs/disk.txt.in:27 +#: ../jobs/disk.txt.in:22 msgid "This test will inspect the following disk:" msgstr "" #. description -#: ../jobs/disk.txt.in:27 +#: ../jobs/disk.txt.in:22 msgid "" " product name: {product}\n" " sysfs path: {path}\n" @@ -842,7 +842,7 @@ msgid "" msgstr "" #. description -#: ../jobs/disk.txt.in:50 +#: ../jobs/disk.txt.in:45 msgid "" "This test checks {name} disk stats, generates some activity and rechecks " "stats to verify they've changed. It also verifies that disks appear in the " @@ -850,19 +850,19 @@ msgid "" msgstr "" #. description -#: ../jobs/disk.txt.in:64 +#: ../jobs/disk.txt.in:59 msgid "" "This tests the SMART capabilities for {product} (Note that this test will " "not work against hardware RAID)" msgstr "" #. description -#: ../jobs/disk.txt.in:94 +#: ../jobs/disk.txt.in:89 msgid "Disk I/O stress test for {product}" msgstr "" #. description -#: ../jobs/disk.txt.in:106 +#: ../jobs/disk.txt.in:101 msgid "" "Some new hard drives include a feature that parks the drive heads after a " "short period of inactivity. This is a power-saving feature, but it can have " @@ -872,7 +872,7 @@ msgid "" msgstr "" #. description -#: ../jobs/disk.txt.in:119 +#: ../jobs/disk.txt.in:114 msgid "" "PURPOSE:\n" " This test checks that a systems drive protection mechanism works properly.\n" @@ -903,7 +903,7 @@ msgid "" msgstr "" #. description -#: ../jobs/esata.txt.in:22 +#: ../jobs/esata.txt.in:22 ../units/dock.pxu:942 msgid "" "This is an automated test which performs read/write operations on an " "attached eSATA HDD" @@ -1099,7 +1099,7 @@ msgid "" msgstr "" #. description -#: ../jobs/firewire.txt.in:24 +#: ../jobs/firewire.txt.in:24 ../units/dock.pxu:897 msgid "" "This is an automated test which performs read/write operations on an " "attached FireWire HDD" @@ -1689,272 +1689,282 @@ msgid "attaches log from single hibernate/resume test to results" msgstr "" #. description -#: ../jobs/info.txt.in:17 +#: ../jobs/info.txt.in:22 msgid "Attaches a report of installed codecs for Intel HDA" msgstr "" #. description -#: ../jobs/info.txt.in:24 +#: ../jobs/info.txt.in:29 msgid "Attaches a report of CPU information" msgstr "" #. summary -#: ../jobs/info.txt.in:25 +#: ../jobs/info.txt.in:30 msgid "Attach a copy of /proc/cpuinfo" msgstr "" #. description -#: ../jobs/info.txt.in:32 +#: ../jobs/info.txt.in:37 msgid "Attaches a copy of /var/log/dmesg to the test results" msgstr "" #. summary -#: ../jobs/info.txt.in:33 +#: ../jobs/info.txt.in:38 msgid "Attach a copy of /var/log/dmesg" msgstr "" #. description -#: ../jobs/info.txt.in:40 +#: ../jobs/info.txt.in:45 msgid "Attaches info on DMI" msgstr "" #. summary -#: ../jobs/info.txt.in:41 +#: ../jobs/info.txt.in:46 msgid "Attach a copy of /sys/class/dmi/id/*" msgstr "" #. description -#: ../jobs/info.txt.in:50 +#: ../jobs/info.txt.in:55 msgid "Attaches dmidecode output" msgstr "" #. summary -#: ../jobs/info.txt.in:51 +#: ../jobs/info.txt.in:56 msgid "Attach a copy of of the output of dmidecode" msgstr "" #. description -#: ../jobs/info.txt.in:59 +#: ../jobs/info.txt.in:64 msgid "Attaches lshw output" msgstr "" #. description -#: ../jobs/info.txt.in:67 +#: ../jobs/info.txt.in:72 msgid "Attaches the firmware version" msgstr "" #. description -#: ../jobs/info.txt.in:74 +#: ../jobs/info.txt.in:79 msgid "Attaches very verbose lspci output." msgstr "" #. summary -#: ../jobs/info.txt.in:75 +#: ../jobs/info.txt.in:80 msgid "Attach a list of PCI devices" msgstr "" #. description -#: ../jobs/info.txt.in:82 +#: ../jobs/info.txt.in:87 msgid "Attaches very verbose lspci output (with central database Query)." msgstr "" #. summary -#: ../jobs/info.txt.in:85 +#: ../jobs/info.txt.in:90 msgid "Attach PCI configuration space hex dump" msgstr "" #. description -#: ../jobs/info.txt.in:90 +#: ../jobs/info.txt.in:95 msgid "" " Attaches a hex dump of the standard part of the PCI configuration\n" " space for all PCI devices." msgstr "" #. description -#: ../jobs/info.txt.in:101 +#: ../jobs/info.txt.in:106 msgid "Attaches a list of detected USB devices." msgstr "" #. description -#: ../jobs/info.txt.in:108 +#: ../jobs/info.txt.in:113 msgid "Attaches info on system memory as seen in /proc/meminfo." msgstr "" #. description -#: ../jobs/info.txt.in:115 +#: ../jobs/info.txt.in:120 msgid "Attaches the contents of the various modprobe conf files." msgstr "" #. summary -#: ../jobs/info.txt.in:116 +#: ../jobs/info.txt.in:121 msgid "Attach the contents of modprobe configuration files" msgstr "" #. summary -#: ../jobs/info.txt.in:121 +#: ../jobs/info.txt.in:126 msgid "Attach modinfo information" msgstr "" #. description -#: ../jobs/info.txt.in:130 +#: ../jobs/info.txt.in:135 msgid "Attaches modinfo information for all currently loaded modules" msgstr "" #. description -#: ../jobs/info.txt.in:138 +#: ../jobs/info.txt.in:142 msgid "Attaches the contents of the /etc/modules file." msgstr "" #. summary -#: ../jobs/info.txt.in:139 +#: ../jobs/info.txt.in:143 msgid "Attach the contents of /etc/modules" msgstr "" #. description -#: ../jobs/info.txt.in:146 +#: ../jobs/info.txt.in:150 msgid "Attaches the contents of various sysctl config files." msgstr "" #. summary -#: ../jobs/info.txt.in:147 +#: ../jobs/info.txt.in:151 msgid "Attach sysctl configuration files." msgstr "" #. description -#: ../jobs/info.txt.in:152 +#: ../jobs/info.txt.in:156 msgid "Attaches a report of sysfs attributes." msgstr "" #. summary -#: ../jobs/info.txt.in:160 +#: ../jobs/info.txt.in:164 msgid "Attach detailed sysfs property output from udev" msgstr "" #. description -#: ../jobs/info.txt.in:167 +#: ../jobs/info.txt.in:171 msgid "" "Attaches a dump of the udev database showing system hardware information." msgstr "" #. summary -#: ../jobs/info.txt.in:168 +#: ../jobs/info.txt.in:172 msgid "Attach hardware database (udev)" msgstr "" #. description -#: ../jobs/info.txt.in:175 +#: ../jobs/info.txt.in:179 msgid "Attaches the output of udev_resource, for debugging purposes" msgstr "" #. description -#: ../jobs/info.txt.in:183 +#: ../jobs/info.txt.in:186 +msgid "Attaches disk block devices mount points" +msgstr "" + +#. summary +#: ../jobs/info.txt.in:187 +msgid "Attaches information about disk block devices and their mount points" +msgstr "" + +#. description +#: ../jobs/info.txt.in:195 msgid "Attaches a tarball of gcov data if present." msgstr "" #. description -#: ../jobs/info.txt.in:190 +#: ../jobs/info.txt.in:202 msgid "Attaches a list of the currently running kernel modules." msgstr "" #. summary -#: ../jobs/info.txt.in:191 +#: ../jobs/info.txt.in:203 msgid "Attach a list of currently running kernel modules" msgstr "" #. summary -#: ../jobs/info.txt.in:198 +#: ../jobs/info.txt.in:210 msgid "Attaches json dumps of installed dkms package information." msgstr "" #. description -#: ../jobs/info.txt.in:205 +#: ../jobs/info.txt.in:217 msgid "Attaches the contents of /proc/acpi/sleep if it exists." msgstr "" #. description -#: ../jobs/info.txt.in:210 +#: ../jobs/info.txt.in:222 msgid "Bootchart information." msgstr "" #. description -#: ../jobs/info.txt.in:236 +#: ../jobs/info.txt.in:248 msgid "Attaches the bootchart png file for bootchart runs" msgstr "" #. description -#: ../jobs/info.txt.in:245 +#: ../jobs/info.txt.in:257 msgid "Attaches the bootchart log for bootchart test runs." msgstr "" #. description -#: ../jobs/info.txt.in:254 +#: ../jobs/info.txt.in:266 msgid "Attach the installer bootchart tarball if it exists." msgstr "" #. description -#: ../jobs/info.txt.in:262 +#: ../jobs/info.txt.in:274 msgid "Attaches the installer debug log if it exists." msgstr "" #. description -#: ../jobs/info.txt.in:270 +#: ../jobs/info.txt.in:282 msgid "" "Returns the name, driver name and driver version of any touchpad discovered " "on the system." msgstr "" #. description -#: ../jobs/info.txt.in:283 +#: ../jobs/info.txt.in:295 msgid "Lists the device driver and version for all audio devices." msgstr "" #. description -#: ../jobs/info.txt.in:294 +#: ../jobs/info.txt.in:306 msgid "Provides information about network devices" msgstr "" #. description -#: ../jobs/info.txt.in:301 +#: ../jobs/info.txt.in:313 msgid "Provides information about wwan/mobile broadband devices" msgstr "" #. description -#: ../jobs/info.txt.in:307 +#: ../jobs/info.txt.in:319 msgid "Provides information about displays attached to the system" msgstr "" #. description -#: ../jobs/info.txt.in:315 +#: ../jobs/info.txt.in:327 msgid "Attaches information about disk partitions" msgstr "" #. description -#: ../jobs/info.txt.in:321 +#: ../jobs/info.txt.in:333 msgid "Attaches the buildstamp identifier for the preinstalled OS" msgstr "" #. summary -#: ../jobs/info.txt.in:322 +#: ../jobs/info.txt.in:334 msgid "Attach /etc/buildstamp" msgstr "" #. description -#: ../jobs/info.txt.in:332 +#: ../jobs/info.txt.in:344 msgid "Check existence of recovery partition" msgstr "" #. description -#: ../jobs/info.txt.in:343 +#: ../jobs/info.txt.in:355 msgid "Check the recovery type is dell or not" msgstr "" #. summary -#: ../jobs/info.txt.in:353 +#: ../jobs/info.txt.in:365 msgid "Attach the recovery partition versions" msgstr "" #. description -#: ../jobs/info.txt.in:354 +#: ../jobs/info.txt.in:366 msgid "" "Attach the recovery partition version image_version is the preinstalled OS " "image version bto_version is only for dell_recovery Example: image_version: " @@ -1963,12 +1973,12 @@ msgid "" msgstr "" #. summary -#: ../jobs/info.txt.in:370 +#: ../jobs/info.txt.in:382 msgid "Attach the bto.xml in Dell recovery partition" msgstr "" #. description -#: ../jobs/info.txt.in:371 +#: ../jobs/info.txt.in:383 msgid "" "bto.xml is basically a Fish manifest The information include:\n" " - fish packages\n" @@ -1976,19 +1986,19 @@ msgid "" msgstr "" #. description -#: ../jobs/info.txt.in:382 +#: ../jobs/info.txt.in:394 msgid "" "Attaches the debug log from the virtualization/kvm_check_vm test to the " "results submission." msgstr "" #. description -#: ../jobs/info.txt.in:392 +#: ../jobs/info.txt.in:404 msgid "Attaches the kernel command line used to boot" msgstr "" #. summary -#: ../jobs/info.txt.in:393 +#: ../jobs/info.txt.in:405 msgid "Attach a copy of /proc/cmdline" msgstr "" @@ -3192,6 +3202,15 @@ msgid "" "installed." msgstr "" +#. description +#: ../jobs/memory.txt.in:33 +msgid "" +"Test to perform some basic stress and exercise of system memory via the " +"stress_ng tool. This test also includes an over-commit function to force " +"swapping to disk, thus SUTs should have suitably large swap files for the " +"amount of RAM they have installed." +msgstr "" + #. summary #: ../jobs/mir.txt.in:10 msgid "MIR Integration test ({name})" @@ -3213,7 +3232,7 @@ msgid "Run {name} test from MIR Acceptance tests." msgstr "" #. description -#: ../jobs/miscellanea.txt.in:17 +#: ../jobs/miscellanea.txt.in:18 msgid "" "A meta-job that verifies the data necessary for a complete result submission " "are present. Failure indicates that the results are incomplete and may be " @@ -3221,7 +3240,7 @@ msgid "" msgstr "" #. description -#: ../jobs/miscellanea.txt.in:25 +#: ../jobs/miscellanea.txt.in:26 msgid "" "PURPOSE:\n" " Keep tester related information in the report\n" @@ -3236,7 +3255,7 @@ msgid "" msgstr "" #. description -#: ../jobs/miscellanea.txt.in:44 +#: ../jobs/miscellanea.txt.in:45 msgid "" "PURPOSE:\n" " This test will check that the system can switch to a virtual terminal " @@ -3250,27 +3269,27 @@ msgid "" msgstr "" #. description -#: ../jobs/miscellanea.txt.in:59 +#: ../jobs/miscellanea.txt.in:60 msgid "Run Firmware Test Suite (fwts) automated tests." msgstr "" #. description -#: ../jobs/miscellanea.txt.in:70 +#: ../jobs/miscellanea.txt.in:73 msgid "Attaches the miscellanes/fwts_test results log to the submission." msgstr "" #. description -#: ../jobs/miscellanea.txt.in:78 +#: ../jobs/miscellanea.txt.in:83 msgid "Attaches the FWTS results log to the submission (to HWE)" msgstr "" #. summary -#: ../jobs/miscellanea.txt.in:79 +#: ../jobs/miscellanea.txt.in:84 msgid "Attach FWTS log to submission (to HWE)" msgstr "" #. description -#: ../jobs/miscellanea.txt.in:87 +#: ../jobs/miscellanea.txt.in:92 msgid "" "This will run some basic commands in-band against a BMC, verifying that IPMI " "works. Use of MAAS to deploy the system implicitly tests out-of-band BMC " @@ -3278,67 +3297,67 @@ msgid "" msgstr "" #. summary -#: ../jobs/miscellanea.txt.in:98 +#: ../jobs/miscellanea.txt.in:103 msgid "EFI-mode boot test" msgstr "" #. description -#: ../jobs/miscellanea.txt.in:99 +#: ../jobs/miscellanea.txt.in:104 msgid "" "Test to verify that the system booted in EFI mode with Secure Boot active." msgstr "" #. description -#: ../jobs/miscellanea.txt.in:110 +#: ../jobs/miscellanea.txt.in:115 msgid "" "This will gather some info about the BMC itself for diagnostic purposes. " "This will not works on non-IPMI systems like AMT and blade/sled type systems." msgstr "" #. summary -#: ../jobs/miscellanea.txt.in:113 +#: ../jobs/miscellanea.txt.in:118 msgid "Gather BMC Identification info" msgstr "" #. description -#: ../jobs/miscellanea.txt.in:123 +#: ../jobs/miscellanea.txt.in:128 msgid "Sanity check of CPU information; fails if CPU is an engineering sample" msgstr "" #. summary -#: ../jobs/miscellanea.txt.in:125 +#: ../jobs/miscellanea.txt.in:130 msgid "CPU sanity check" msgstr "" #. description -#: ../jobs/miscellanea.txt.in:135 +#: ../jobs/miscellanea.txt.in:140 msgid "Sanity check of DMI system identification data (for servers)" msgstr "" #. summary -#: ../jobs/miscellanea.txt.in:137 +#: ../jobs/miscellanea.txt.in:142 msgid "DMI ID sanity check (servers)" msgstr "" #. description -#: ../jobs/miscellanea.txt.in:147 +#: ../jobs/miscellanea.txt.in:152 msgid "Sanity check of DMI system identification data (for desktops & laptops)" msgstr "" #. summary -#: ../jobs/miscellanea.txt.in:149 +#: ../jobs/miscellanea.txt.in:154 msgid "DMI ID sanity check (desktops/laptops)" msgstr "" #. description -#: ../jobs/miscellanea.txt.in:156 +#: ../jobs/miscellanea.txt.in:161 msgid "" " Determine if we need to run tests specific to portable computers that may " "not apply to desktops." msgstr "" #. description -#: ../jobs/miscellanea.txt.in:165 +#: ../jobs/miscellanea.txt.in:170 msgid "" "Test that the /var/crash directory doesn't contain anything. Lists the files " "contained within if it does, or echoes the status of the directory (doesn't " @@ -3346,61 +3365,61 @@ msgid "" msgstr "" #. description -#: ../jobs/miscellanea.txt.in:172 +#: ../jobs/miscellanea.txt.in:177 msgid "" "Checks that a specified sources list file contains the requested repositories" msgstr "" #. summary -#: ../jobs/miscellanea.txt.in:180 +#: ../jobs/miscellanea.txt.in:185 msgid "PXE verification test of device {__index__} ({interface})" msgstr "" #. purpose -#: ../jobs/miscellanea.txt.in:182 +#: ../jobs/miscellanea.txt.in:187 msgid "" "This test will verify that you have attempted to PXE boot this machine from " "the network device {__index__} ({interface})." msgstr "" #. steps -#: ../jobs/miscellanea.txt.in:185 +#: ../jobs/miscellanea.txt.in:190 msgid "" "1. Prior to running this test, you should have attempted to boot this system " "via PXE on every Network Port available." msgstr "" #. verification -#: ../jobs/miscellanea.txt.in:187 +#: ../jobs/miscellanea.txt.in:192 msgid "" -"1. Select Yes if you successfully used PXE boot this system using the NIC " -"{interface} 2. Select No if you did not attempt to PXE boot this system " -"using the NIC {interface} 3. Select No if you attempted to PXE boot via " -"{interface} and it failed for some reason." +"1. Select Yes if you successfully used PXE to boot this system using the NIC " +"{interface} 2. Select No if you attempted to PXE boot via {interface} and it " +"failed for some reason. 3. Select Skip if you did not attempt to PXE boot " +"this system using the NIC {interface}" msgstr "" #. summary -#: ../jobs/miscellanea.txt.in:198 +#: ../jobs/miscellanea.txt.in:203 msgid "" "Remote Shared IPMI verification test for device {__index__} ({interface})" msgstr "" #. purpose -#: ../jobs/miscellanea.txt.in:200 +#: ../jobs/miscellanea.txt.in:205 msgid "" "This test will verify that you have attempted IPMI control of this machine " "from the network device {__index__} ({interface})." msgstr "" #. steps -#: ../jobs/miscellanea.txt.in:202 +#: ../jobs/miscellanea.txt.in:207 msgid "" "1. Prior to running this test, you should have configured and used IPMI to " "power this machine off and on using every Network Port available." msgstr "" #. verification -#: ../jobs/miscellanea.txt.in:204 +#: ../jobs/miscellanea.txt.in:209 msgid "" "1. Select Yes if you successfully used IPMI to remotely power this system " "off and on using the NIC {interface} 2. Select No if you did not attempt to " @@ -3410,7 +3429,7 @@ msgid "" msgstr "" #. description -#: ../jobs/miscellanea.txt.in:212 +#: ../jobs/miscellanea.txt.in:217 msgid "" "PURPOSE:\n" " Some systems do not share IPMI over all NICs but instead have a dedicated " @@ -3421,7 +3440,7 @@ msgid "" "Dedicated Management Port to remotely power off/on this sytem.\n" "VERIFICATION:\n" " Skip this test if this system ONLY uses shared management/ethernet ports OR " -"if this system does not have a BMC (Management Console)\n" +"if this system does not have a Management Controller.\n" " 1. Select Yes if you successfully used IPMI to remotely power this system " "off and on using the dedicated management port.\n" " 2. Select No if you attempted to use the dedicated management port to " @@ -3429,36 +3448,36 @@ msgid "" msgstr "" #. description -#: ../jobs/miscellanea.txt.in:228 +#: ../jobs/miscellanea.txt.in:233 msgid "Run Firmware Test Suite (fwts) oops tests." msgstr "" #. description -#: ../jobs/miscellanea.txt.in:240 +#: ../jobs/miscellanea.txt.in:245 msgid "Attaches the FWTS oops results log to the submission" msgstr "" #. description -#: ../jobs/miscellanea.txt.in:253 +#: ../jobs/miscellanea.txt.in:258 msgid "" "If system was installed via MAAS from a cert server, the MAAS version used " "should be contained in /etc/installed-by-maas" msgstr "" #. summary -#: ../jobs/miscellanea.txt.in:254 +#: ../jobs/miscellanea.txt.in:259 msgid "Gets the version of MAAS used to deploy the SUT" msgstr "" #. description -#: ../jobs/miscellanea.txt.in:262 +#: ../jobs/miscellanea.txt.in:267 msgid "" "Retrieve the computer's make and model for easier access than digging " "through the dmidecode output." msgstr "" #. summary -#: ../jobs/miscellanea.txt.in:263 +#: ../jobs/miscellanea.txt.in:268 msgid "Retrieve the computer's make and model" msgstr "" @@ -3567,7 +3586,7 @@ msgid "" msgstr "" #. verification -#: ../jobs/monitor.txt.in:82 +#: ../jobs/monitor.txt.in:82 ../units/dock.pxu:673 msgid " Was the desktop displayed correctly on both screens?" msgstr "" @@ -3664,7 +3683,7 @@ msgid "" msgstr "" #. description -#: ../jobs/networking.txt.in:7 +#: ../jobs/networking.txt.in:7 ../units/dock.pxu:512 msgid "Tests whether the system has a working Internet connection." msgstr "" @@ -4182,7 +4201,15 @@ msgid "" msgstr "" #. description -#: ../jobs/stress.txt.in:33 +#: ../jobs/stress.txt.in:27 +msgid "" +"Impose a high system load using the 'stress_ng' tool to exercise the CPU for " +"several hours. The test is considered passed if the system does not freeze " +"and if the stress_ng tool does not report errors." +msgstr "" + +#. description +#: ../jobs/stress.txt.in:51 msgid "" "PURPOSE:\n" " This is an automated stress test that will force the system to hibernate/" @@ -4190,25 +4217,25 @@ msgid "" msgstr "" #. description -#: ../jobs/stress.txt.in:42 +#: ../jobs/stress.txt.in:60 msgid "" "Automated check of the 30 cycle hibernate log for errors detected by fwts." msgstr "" #. description -#: ../jobs/stress.txt.in:50 +#: ../jobs/stress.txt.in:68 msgid "Attaches the log from the 30 cycle Hibernate/Resume test if it exists" msgstr "" #. description -#: ../jobs/stress.txt.in:63 +#: ../jobs/stress.txt.in:81 msgid "" "This is an automated stress test that will run a sequence of '30 suspend/" "resume cycles and one reboot' 3 times." msgstr "" #. description -#: ../jobs/stress.txt.in:83 +#: ../jobs/stress.txt.in:101 msgid "" "PURPOSE:\n" " This is an automated stress test that will force the system to suspend/" @@ -4216,32 +4243,32 @@ msgid "" msgstr "" #. description -#: ../jobs/stress.txt.in:93 +#: ../jobs/stress.txt.in:111 msgid "" "Automated check of the 30 cycle suspend log for errors detected by fwts." msgstr "" #. description -#: ../jobs/stress.txt.in:102 +#: ../jobs/stress.txt.in:120 msgid "" "Automated check of the '30 cycle suspend and 1 reboot times 3' logs for " "errors detected by fwts." msgstr "" #. description -#: ../jobs/stress.txt.in:111 +#: ../jobs/stress.txt.in:129 msgid "Attaches the log from the 30 cycle Suspend/Resume test if it exists" msgstr "" #. description -#: ../jobs/stress.txt.in:120 +#: ../jobs/stress.txt.in:138 msgid "" "Attaches the log from the '30 cycle Suspend/Resume and one reboot times 3' " "test if it exists" msgstr "" #. description -#: ../jobs/stress.txt.in:156 +#: ../jobs/stress.txt.in:174 msgid "" "PURPOSE:\n" " This is an automated stress test that will force the system to hibernate/" @@ -4249,12 +4276,12 @@ msgid "" msgstr "" #. description -#: ../jobs/stress.txt.in:165 +#: ../jobs/stress.txt.in:183 msgid "Attaches the log from the 250 cycle Hibernate/Resume test if it exists" msgstr "" #. description -#: ../jobs/stress.txt.in:183 +#: ../jobs/stress.txt.in:201 msgid "" "PURPOSE:\n" " This is an automated stress test that will force the system to suspend/" @@ -4262,79 +4289,79 @@ msgid "" msgstr "" #. description -#: ../jobs/stress.txt.in:192 +#: ../jobs/stress.txt.in:210 msgid "Attaches the log from the 250 cycle Suspend/Resume test if it exists" msgstr "" #. description -#: ../jobs/stress.txt.in:200 ../jobs/suspend.txt.in:366 +#: ../jobs/stress.txt.in:218 ../jobs/suspend.txt.in:366 msgid "" "Checks the sleep times to ensure that a machine suspends and resumes within " "a given threshold" msgstr "" #. description -#: ../jobs/stress.txt.in:214 +#: ../jobs/stress.txt.in:232 msgid "Stress reboot system (100 cycles)" msgstr "" #. description -#: ../jobs/stress.txt.in:237 +#: ../jobs/stress.txt.in:255 msgid "Stress reboot system (30 cycles)" msgstr "" #. description -#: ../jobs/stress.txt.in:259 +#: ../jobs/stress.txt.in:277 msgid "Stress poweroff system (100 cycles)" msgstr "" #. description -#: ../jobs/stress.txt.in:282 +#: ../jobs/stress.txt.in:300 msgid "Stress poweroff system (30 cycles)" msgstr "" #. description -#: ../jobs/stress.txt.in:299 +#: ../jobs/stress.txt.in:317 msgid "Check logs for the stress reboot (30 cycles) test case" msgstr "" #. description -#: ../jobs/stress.txt.in:316 +#: ../jobs/stress.txt.in:334 msgid "Check logs for the stress poweroff (30 cycles) test case" msgstr "" #. description -#: ../jobs/stress.txt.in:333 +#: ../jobs/stress.txt.in:351 msgid "Check logs for the stress reboot (100 cycles) test case" msgstr "" #. description -#: ../jobs/stress.txt.in:350 +#: ../jobs/stress.txt.in:368 msgid "Check logs for the stress poweroff (100 cycles) test case" msgstr "" #. description -#: ../jobs/stress.txt.in:370 +#: ../jobs/stress.txt.in:388 msgid "Run the graphics stress test. This test can take a few minutes." msgstr "" #. description -#: ../jobs/stress.txt.in:380 +#: ../jobs/stress.txt.in:398 msgid "Attaches the graphics stress results to the submission." msgstr "" #. description -#: ../jobs/stress.txt.in:388 +#: ../jobs/stress.txt.in:406 msgid "Runs a test that transfers 100 10MB files 3 times to usb." msgstr "" #. summary -#: ../jobs/stress.txt.in:394 +#: ../jobs/stress.txt.in:412 msgid "Stress test for SDHC card" msgstr "" #. description -#: ../jobs/stress.txt.in:397 +#: ../jobs/stress.txt.in:415 msgid "" "PURPOSE:\n" " This test will transfers 100 10MB files 3 times to a SDHC card, to\n" @@ -4350,12 +4377,12 @@ msgid "" msgstr "" #. description -#: ../jobs/stress.txt.in:417 +#: ../jobs/stress.txt.in:435 msgid "Ping ubuntu.com and restart network interfaces 100 times" msgstr "" #. description -#: ../jobs/stress.txt.in:431 +#: ../jobs/stress.txt.in:449 msgid "" "PURPOSE:\n" " To make sure that stressing the wifi hotkey does not cause applets to " @@ -4370,7 +4397,7 @@ msgid "" msgstr "" #. description -#: ../jobs/suspend.txt.in:6 +#: ../jobs/suspend.txt.in:6 ../units/dock.pxu:479 msgid "Record the current network before suspending." msgstr "" @@ -4380,7 +4407,7 @@ msgid "Record the current resolution before suspending." msgstr "" #. description -#: ../jobs/suspend.txt.in:33 +#: ../jobs/suspend.txt.in:33 ../units/dock.pxu:489 msgid "Record mixer settings before suspending." msgstr "" @@ -4459,8 +4486,8 @@ msgid "" " 5. If your system fails to wake at all and must be rebooted, restart " "System Testing after reboot and mark this test as Failed\n" "VERIFICATION:\n" -" Did your system suspend and resume correctly after switching to $product " -"graphics card?\n" +" Did your system suspend and resume correctly after switching to {vendor} " +"{product} graphics card?\n" " (NOTE: Please only consider whether the system successfully suspended " "and resumed. Power/Suspend LED verification will occur after this test is " "completed.)" @@ -4544,7 +4571,7 @@ msgid "Test to see that we have the same resolution after resuming as before." msgstr "" #. description -#: ../jobs/suspend.txt.in:449 +#: ../jobs/suspend.txt.in:449 ../units/dock.pxu:838 msgid "" "Verify that mixer settings after suspend are the same as before suspend." msgstr "" @@ -4662,42 +4689,42 @@ msgid "" msgstr "" #. description -#: ../jobs/suspend.txt.in:842 +#: ../jobs/suspend.txt.in:842 ../units/dock.pxu:709 msgid "" "Tests that the systems wireless hardware can connect to a router using WPA " "security and the 802.11b/g protocols after the system has been suspended." msgstr "" #. description -#: ../jobs/suspend.txt.in:873 +#: ../jobs/suspend.txt.in:873 ../units/dock.pxu:732 msgid "" "Tests that the systems wireless hardware can connect to a router using no " "security and the 802.11b/g protocols after the system has been suspended." msgstr "" #. description -#: ../jobs/suspend.txt.in:904 +#: ../jobs/suspend.txt.in:904 ../units/dock.pxu:755 msgid "" "Tests that the systems wireless hardware can connect to a router using WPA " "security and the 802.11n protocol after the system has been suspended." msgstr "" #. description -#: ../jobs/suspend.txt.in:935 +#: ../jobs/suspend.txt.in:935 ../units/dock.pxu:778 msgid "" "Tests that the systems wireless hardware can connect to a router using no " "security and the 802.11n protocol after the system has been suspended." msgstr "" #. description -#: ../jobs/suspend.txt.in:967 +#: ../jobs/suspend.txt.in:967 ../units/dock.pxu:802 msgid "" "Tests that the systems wireless hardware can connect to a router using WPA " "security and the 802.11ac protocol after the system has been suspended." msgstr "" #. description -#: ../jobs/suspend.txt.in:999 +#: ../jobs/suspend.txt.in:999 ../units/dock.pxu:826 msgid "" "Tests that the systems wireless hardware can connect to a router using no " "security and the 802.11ac protocol after the system has been suspended." @@ -4892,7 +4919,7 @@ msgid "" msgstr "" #. description -#: ../jobs/suspend.txt.in:1595 +#: ../jobs/suspend.txt.in:1595 ../units/dock.pxu:857 msgid "" "This will check to make sure that your audio device works properly after a " "suspend and resume. This may work fine with speakers and onboard " @@ -5743,7 +5770,7 @@ msgstr "" #: ../jobs/suspend.txt.in:2677 msgid "" "PURPOSE:\n" -" This will test your $product device after suspend.\n" +" This will test your {product} device after suspend.\n" "STEPS:\n" " 1. Move the cursor with your {product}.\n" "VERIFICATION:\n" @@ -5885,6 +5912,95 @@ msgstr "" msgid "Attaches the FWTS oops results log to the submission after suspend" msgstr "" +#. name +#: ../jobs/thunderbolt.pxu:3 +msgid "Thunderbolt Support " +msgstr "" + +#. summary +#: ../jobs/thunderbolt.pxu:13 +msgid "Storage insert detection on Thunderbolt" +msgstr "" + +#. description +#: ../jobs/thunderbolt.pxu:14 +msgid "" +"PURPOSE:\n" +" This test will check if the insertion of a Thunderbolt HDD could be " +"detected\n" +"STEPS:\n" +" 1. Click 'Test' to begin the test. This test will\n" +" timeout and fail if the insertion has not been detected within 40 " +"seconds.\n" +" 2. Plug a Thunderbolt HDD into an available Thunderbolt port, if it's " +"not\n" +" mounted automatically, please click the HDD icon to mount it.\n" +"VERIFICATION:\n" +" The verification of this test is automated. Do not change the " +"automatically\n" +" selected result" +msgstr "" + +#. summary +#: ../jobs/thunderbolt.pxu:35 +msgid "Storage test on Thunderbolt" +msgstr "" + +#. description +#: ../jobs/thunderbolt.pxu:36 ../units/dock.pxu:1016 +msgid "" +"This is an automated test which performs read/write operations on an " +"attached Thunderbolt HDD" +msgstr "" + +#. summary +#: ../jobs/thunderbolt.pxu:48 +msgid "Storage removal detection on Thunderbolt" +msgstr "" + +#. description +#: ../jobs/thunderbolt.pxu:49 +msgid "" +"PURPOSE:\n" +" This test will check the system can detect the removal of a Thunderbolt " +"HDD\n" +"STEPS:\n" +" 1. Click 'Test' to begin the test. This test will timeout and fail if\n" +" the removal has not been detected within 20 seconds.\n" +" 2. Remove the previously attached Thunderbolt HDD from the Thunderbolt " +"port.\n" +"VERIFICATION:\n" +" The verification of this test is automated. Do not change the " +"automatically\n" +" selected result" +msgstr "" + +#. summary +#: ../jobs/thunderbolt.pxu:67 +msgid "Daisy-chain testing for Thunderbolt storage and display device" +msgstr "" + +#. description +#: ../jobs/thunderbolt.pxu:68 +msgid "" +"PURPOSE:\n" +" This test will check if your system can support daisy-chaining of a " +"storage\n" +" and a monitor over Thunderbolt port\n" +"STEPS:\n" +" 1. Connect your Thunderbolt monitor to your systems\n" +" 2. Connect and mount your Thunderbolt HDD to another Thunderbolt port of " +"the\n" +" monitor (you can do this with HDD first as well)\n" +" 3. Click 'Test' to perform the storage test on the Thunderbolt HDD\n" +"VERIFICATION:\n" +" 1. The verification for storage is automated, please select the result " +"combine\n" +" with the result for the display.\n" +" 2. Was the desktop displayed correctly on the Thunderbolt-connected " +"screen?" +msgstr "" + #. description #: ../jobs/touchpad.txt.in:6 msgid "" @@ -6686,3 +6802,1050 @@ msgid "" "User verification of whether the observed transfer throughput is acceptable " "for the type and maximum speed of wireless device {__index__} ({interface})." msgstr "" + +#. name +#: ../units/autotesting.pxu:2 +msgid "Automated Tests" +msgstr "" + +#. description +#: ../units/autotesting.pxu:4 +msgid "" +" This test plan is used for automated testing of the test cases " +"themselves.\n" +" The resources jobs are needed for a valid submission, so they are " +"included\n" +" explicitly, even if they are usually run implicitly by jobs requiring " +"them." +msgstr "" + +#. name +#: ../units/default.pxu:2 +msgid "Default Tests" +msgstr "" + +#. summary +#: ../units/dock.pxu:4 +msgid "Docking test" +msgstr "" + +#. purpose +#: ../units/dock.pxu:5 +msgid " This test will check the device can be used after docking." +msgstr "" + +#. steps +#: ../units/dock.pxu:7 +msgid " 1. Dock the device to the docking unit." +msgstr "" + +#. verification +#: ../units/dock.pxu:9 +msgid " Is the device working as expected after being docked?" +msgstr "" + +#. summary +#: ../units/dock.pxu:15 +msgid "DisplayPort test on the dock" +msgstr "" + +#. purpose +#: ../units/dock.pxu:17 +msgid " This test will check the DisplayPort(s) on the dock." +msgstr "" + +#. summary +#: ../units/dock.pxu:29 +msgid "DVI port test on the dock" +msgstr "" + +#. purpose +#: ../units/dock.pxu:31 +msgid " This test will check the DVI port(s) on the dock." +msgstr "" + +#. summary +#: ../units/dock.pxu:43 +msgid "HDMI port test on the dock" +msgstr "" + +#. purpose +#: ../units/dock.pxu:45 +msgid " This test will check the HDMI port(s) on the dock." +msgstr "" + +#. summary +#: ../units/dock.pxu:57 +msgid "VGA port test on the dock" +msgstr "" + +#. purpose +#: ../units/dock.pxu:59 +msgid " This test will check the VGA port(s) on the dock." +msgstr "" + +#. summary +#: ../units/dock.pxu:71 +msgid "Multiple monitors test while docked" +msgstr "" + +#. purpose +#: ../units/dock.pxu:73 +msgid "" +" This test verifies that multi-monitor output works using the dock. You " +"will need at least two external monitors to perform this test." +msgstr "" + +#. steps +#: ../units/dock.pxu:75 +msgid "" +" Skip this test if your video card or the dock do not support multiple " +"monitors.\n" +" 1. If your dock provides more than one monitor outputs, connect two " +"monitors\n" +" 2. Open the \"Displays\" tool (open the dash and search for \"Displays" +"\")\n" +" 3. Configure your output to provide one desktop across all the monitors\n" +" 4. Open any application and drag its window from one monitor to the next." +msgstr "" + +#. verification +#: ../units/dock.pxu:81 +msgid "" +" Was the stretched desktop displayed correctly across all the screens?" +msgstr "" + +#. summary +#: ../units/dock.pxu:87 +msgid "Video Out hotkey test" +msgstr "" + +#. purpose +#: ../units/dock.pxu:89 +msgid " Validate that the External Video hotkey is working as expected" +msgstr "" + +#. steps +#: ../units/dock.pxu:91 +msgid "" +" 1. Plug in an external monitor\n" +" 2. Press the display hotkey to change the monitors configuration" +msgstr "" + +#. verification +#: ../units/dock.pxu:94 +msgid "" +" Check that the video signal can be mirrored, extended, displayed on " +"external or onboard only." +msgstr "" + +#. summary +#: ../units/dock.pxu:102 +msgid "List audio devices" +msgstr "" + +#. summary +#: ../units/dock.pxu:117 +msgid "HDMI audio test" +msgstr "" + +#. purpose +#: ../units/dock.pxu:127 +msgid " Dock HDMI audio interface verification" +msgstr "" + +#. steps +#: ../units/dock.pxu:129 +msgid "" +" 1. Plug an external HDMI device with sound to the dock (use only one HDMI/" +"DisplayPort/Thunderbolt interface at a time for this test)\n" +" 2. Go to the Sound settings and make sure the correct Output is selected\n" +" 3. Click the Test button" +msgstr "" + +#. summary +#: ../units/dock.pxu:143 +msgid "DisplayPort audio test" +msgstr "" + +#. purpose +#: ../units/dock.pxu:153 +msgid " Dock DisplayPort audio interface verification" +msgstr "" + +#. steps +#: ../units/dock.pxu:155 +msgid "" +" 1. Plug an external DisplayPort device with sound to the dock (use only " +"one HDMI/DisplayPort/Thunderbolt interface at a time for this test)\n" +" 2. Go to the Sound settings and make sure the correct Output is selected\n" +" 3. Click the Test button" +msgstr "" + +#. summary +#: ../units/dock.pxu:165 +msgid "Headphones output test" +msgstr "" + +#. purpose +#: ../units/dock.pxu:179 +msgid "" +" This test will check that headphones connector works correctly.\n" +" (Skip this test if there is no headphone connector on the dock)" +msgstr "" + +#. steps +#: ../units/dock.pxu:182 +msgid "" +" 1. Connect a pair of headphones to the dock\n" +" 2. Click the Test button to play a sound to your audio device" +msgstr "" + +#. verification +#: ../units/dock.pxu:185 +msgid "" +" Did you hear a sound through the headphones and did the sound play " +"without any distortion, clicks or other strange noises from your headphones?" +msgstr "" + +#. summary +#: ../units/dock.pxu:191 +msgid "External microphone plugged to the dock to record sound test" +msgstr "" + +#. purpose +#: ../units/dock.pxu:205 +msgid "" +" This test will check that recording sound using an external microphone " +"works correctly\n" +" (Skip this test if the dock does not have a microphone connector)" +msgstr "" + +#. steps +#: ../units/dock.pxu:208 +msgid "" +" 1. Connect a microphone to the dock's microphone port\n" +" 2. Click \"Test\", then speak into the external microphone\n" +" 3. After a few seconds, your speech will be played back to you" +msgstr "" + +#. verification +#: ../units/dock.pxu:212 +msgid " Did you hear your speech played back?" +msgstr "" + +#. summary +#: ../units/dock.pxu:218 +msgid "Collect audio-related system information" +msgstr "" + +#. summary +#: ../units/dock.pxu:230 +msgid "Attach audio hardware data log to results" +msgstr "" + +#. summary +#: ../units/dock.pxu:239 +msgid "Line-out connection test" +msgstr "" + +#. purpose +#: ../units/dock.pxu:240 +msgid "" +" Check that external line-out connection works correctly\n" +" (Skip this test if dock does not have a line out connector)" +msgstr "" + +#. steps +#: ../units/dock.pxu:243 +msgid "" +" 1. Insert cable to speakers (with built-in amplifiers) on the dock's " +"line-out port\n" +" 2. Open system sound preferences, 'Output' tab, select 'Line-out' on the " +"connector list. Click the Test button\n" +" 3. On the system sound preferences, select 'Internal Audio' on the " +"device list and click 'Test Speakers' to check left and right channel" +msgstr "" + +#. verification +#: ../units/dock.pxu:247 +msgid "" +" 1. Do you hear a sound in the speakers? The internal speakers should " +"*not* be muted automatically\n" +" 2. Do you hear the sound coming out on the corresponding channel?" +msgstr "" + +#. summary +#: ../units/dock.pxu:255 +msgid "Line-in connection test" +msgstr "" + +#. purpose +#: ../units/dock.pxu:268 +msgid "" +" Check that external line-in connection works correctly\n" +" (Skip this test if the dock does not have a line in connector)" +msgstr "" + +#. steps +#: ../units/dock.pxu:271 +msgid "" +" 1. Use a cable to connect the dock's line-in port to an external line-out " +"source.\n" +" 2. Open system sound preferences, 'Input' tab, select 'Line-in' on the " +"connector list. Click the Test button\n" +" 3. After a few seconds, your recording will be played back to you." +msgstr "" + +#. verification +#: ../units/dock.pxu:275 +msgid " Did you hear your recording?" +msgstr "" + +#. summary +#: ../units/dock.pxu:282 +msgid "Headphones recognized when plugged to the dock test" +msgstr "" + +#. purpose +#: ../units/dock.pxu:287 +msgid "" +" Check that system detects speakers or headphones being plugged in\n" +" (Skip this test if the dock does not have headphones connector)" +msgstr "" + +#. steps +#: ../units/dock.pxu:290 +msgid "" +" 1. Prepare a pair of headphones or speakers with a standard 3.5mm jack\n" +" 2. Locate the speaker / headphone jack on the dock under test\n" +" 3. Run the test (you have 30 seconds from now on)\n" +" 4. Plug headphones or speakers into the appropriate jack\n" +" 5. Unplug the device for subsequent tests." +msgstr "" + +#. summary +#: ../units/dock.pxu:304 +msgid "Microphone recognized when plugged to the dock test" +msgstr "" + +#. purpose +#: ../units/dock.pxu:309 +msgid "" +" Check that system detects a microphone being plugged in\n" +" (Skip this test if the dock does not have a microphone connector)" +msgstr "" + +#. steps +#: ../units/dock.pxu:312 +msgid "" +" 1. Prepare a microphone with a standard 3.5mm jack\n" +" 2. Locate the microphone jack on the dock under test.\n" +" Keep in mind that it may be shared with the headphone jack.\n" +" 3. Run the test (you have 30 seconds from now on)\n" +" 4. Plug the microphone into the appropriate jack\n" +" 5. Unplug the device for subsequent tests." +msgstr "" + +#. verification +#: ../units/dock.pxu:319 +msgid "" +" Verification is automatic, no action is required.\n" +" The test times out after 30 seconds (and fails in that case)." +msgstr "" + +#. summary +#: ../units/dock.pxu:330 +msgid "Ping test using dock's Ethernet connectivity" +msgstr "" + +#. purpose +#: ../units/dock.pxu:331 +msgid " Tests whether the system has a working Internet connection." +msgstr "" + +#. verification +#: ../units/dock.pxu:337 +msgid " Was the test able to ping the network using the Ethernet connection?" +msgstr "" + +#. summary +#: ../units/dock.pxu:347 +msgid "NTP sync test using dock's Ethernet connectivity" +msgstr "" + +#. purpose +#: ../units/dock.pxu:348 +msgid " Test to see if we can sync local clock to an NTP server" +msgstr "" + +#. steps +#: ../units/dock.pxu:350 +msgid "" +" 1. Make sure the dock is connected to network using an Ethernet cable\n" +" 2. Make sure the laptop itself is not connected to any Ethernet cable\n" +" 3. Launch the test" +msgstr "" + +#. verification +#: ../units/dock.pxu:354 +msgid "" +" Was the test able to synchronize system time using the Ethernet " +"connection?" +msgstr "" + +#. summary +#: ../units/dock.pxu:362 +msgid "USB HID device test" +msgstr "" + +#. summary +#: ../units/dock.pxu:376 +msgid "USB drive insertion test" +msgstr "" + +#. purpose +#: ../units/dock.pxu:378 +msgid "" +" This test will check that the system correctly detects the insertion of\n" +" a USB storage device plugged on the dock" +msgstr "" + +#. summary +#: ../units/dock.pxu:395 +msgid "USB3 drive insertion test" +msgstr "" + +#. purpose +#: ../units/dock.pxu:397 +msgid "" +" This test will check that the system correctly detects the insertion of\n" +" a USB 3.0 storage device" +msgstr "" + +#. summary +#: ../units/dock.pxu:414 +msgid "USB drive removal test" +msgstr "" + +#. purpose +#: ../units/dock.pxu:416 +msgid "" +" This test will check that the system correctly detects the removal of\n" +" a USB storage device" +msgstr "" + +#. summary +#: ../units/dock.pxu:430 +msgid "USB3 drive removal test" +msgstr "" + +#. purpose +#: ../units/dock.pxu:432 +msgid "" +" This test will check that the system correctly detects the removal of\n" +" a USB 3.0 storage device" +msgstr "" + +#. summary +#: ../units/dock.pxu:447 +msgid "USB drive storage test" +msgstr "" + +#. description +#: ../units/dock.pxu:449 +msgid "" +"This test is automated and executes after the dock/usb_insert test is run." +msgstr "" + +#. summary +#: ../units/dock.pxu:457 +msgid "USB3 drive storage test" +msgstr "" + +#. description +#: ../units/dock.pxu:459 +msgid "" +"This test is automated and executes after the dock/usb3_insert test is run." +msgstr "" + +#. summary +#: ../units/dock.pxu:465 +msgid "Battery charging when docked test" +msgstr "" + +#. description +#: ../units/dock.pxu:471 +msgid "" +"This test will make sure the laptop is being charged while connected to the " +"dock." +msgstr "" + +#. summary +#: ../units/dock.pxu:478 +msgid "Network status before suspend" +msgstr "" + +#. summary +#: ../units/dock.pxu:485 +msgid "Audio status before suspend" +msgstr "" + +#. summary +#: ../units/dock.pxu:495 +msgid "Suspend the device, dock it and resume it" +msgstr "" + +#. purpose +#: ../units/dock.pxu:496 +msgid "" +" This test will check the device can be suspended, docked and resumed " +"properly" +msgstr "" + +#. steps +#: ../units/dock.pxu:498 +msgid "" +" 1. If the laptop is currently docked, undock it now\n" +" 2. Suspend the laptop (e.g. by closing its lid)\n" +" 3. Dock the laptop\n" +" 4. Resume the laptop (e.g. by pressing the Power button on the dock)" +msgstr "" + +#. verification +#: ../units/dock.pxu:503 +msgid " Is the device working as expected after being docked and resumed?" +msgstr "" + +#. summary +#: ../units/dock.pxu:511 +msgid "Network gateway ping after suspend" +msgstr "" + +#. summary +#: ../units/dock.pxu:518 +msgid "USB drive insertion after resuming" +msgstr "" + +#. purpose +#: ../units/dock.pxu:520 +msgid "" +" This test will check that the system correctly detects the insertion of\n" +" a USB storage device plugged on the dock after suspend" +msgstr "" + +#. steps +#: ../units/dock.pxu:523 +msgid "" +" 1. Click \"Test\" and insert a USB storage device, preferably a HDD,\n" +" in one of the dock's port.\n" +" Although a USB pen drive may be used it might cause performance\n" +" related tests to fail. (Note: this test will time-out after 20\n" +" seconds.)\n" +" 2. Do not unplug the device after the test." +msgstr "" + +#. summary +#: ../units/dock.pxu:538 +msgid "USB3 drive insertion after resuming" +msgstr "" + +#. purpose +#: ../units/dock.pxu:540 +msgid "" +" This test will check that the system correctly detects the insertion of\n" +" a USB 3.0 storage device after suspend" +msgstr "" + +#. steps +#: ../units/dock.pxu:543 +msgid "" +" 1. Click \"Test\" and insert a USB 3.0 storage device, preferably a HDD,\n" +" in one of the dock's USB 3.0 port. Although a USB 3.0 pen drive may\n" +" be used it might cause performance related tests to fail.\n" +" (Note: this test will time-out after 20 seconds.)\n" +" 2. Do not unplug the device after the test." +msgstr "" + +#. summary +#: ../units/dock.pxu:557 +msgid "USB drive removal after resuming" +msgstr "" + +#. purpose +#: ../units/dock.pxu:559 +msgid "" +" This test will check that the system correctly detects the removal of\n" +" a USB storage device after suspend" +msgstr "" + +#. steps +#: ../units/dock.pxu:562 +msgid "" +" 1. Click \"Test\" and remove the USB device from the dock.\n" +" (Note: this test will time-out after 20 seconds.)" +msgstr "" + +#. summary +#: ../units/dock.pxu:573 +msgid "USB3 drive removal after resuming" +msgstr "" + +#. purpose +#: ../units/dock.pxu:575 +msgid "" +" This test will check that the system correctly detects the removal of\n" +" a USB 3.0 storage device after suspend" +msgstr "" + +#. steps +#: ../units/dock.pxu:578 +msgid "" +" 1. Click \"Test\" and remove the USB 3.0 device from the dock.\n" +" (Note: this test will time-out after 20 seconds.)" +msgstr "" + +#. verification +#: ../units/dock.pxu:581 +msgid "" +" The verification of this test is automated. Do not change the\n" +" automatically selected result." +msgstr "" + +#. summary +#: ../units/dock.pxu:590 +msgid "USB drive storage test after resuming" +msgstr "" + +#. description +#: ../units/dock.pxu:592 +msgid "" +"This test is automated and executes after the dock/usb-insert test is run." +msgstr "" + +#. summary +#: ../units/dock.pxu:600 +msgid "USB3 drive storage test after resuming" +msgstr "" + +#. description +#: ../units/dock.pxu:602 +msgid "" +"This test is automated and executes after the dock/usb3-insert test is run." +msgstr "" + +#. summary +#: ../units/dock.pxu:609 +msgid "USB HID device test after resuming" +msgstr "" + +#. purpose +#: ../units/dock.pxu:611 +msgid " This test will check that you can use a USB HID device" +msgstr "" + +#. steps +#: ../units/dock.pxu:613 +msgid "" +" 1. Enable either a USB mouse or keyboard\n" +" 2. For mice, perform actions such as moving the pointer, right and left " +"button clicks and double clicks\n" +" 3. For keyboards, click the Test button to lauch a small tool. Type some " +"text and close the tool." +msgstr "" + +#. verification +#: ../units/dock.pxu:617 +msgid " Did the device work as expected?" +msgstr "" + +#. summary +#: ../units/dock.pxu:623 +msgid "DisplayPort test on the dock after resuming" +msgstr "" + +#. purpose +#: ../units/dock.pxu:625 +msgid " This test will check the DisplayPort(s) on the dock after resuming." +msgstr "" + +#. steps +#: ../units/dock.pxu:627 +msgid "" +" Skip this test if the dock does not have a DisplayPort.\n" +" 1. Connect a display (if not already connected) to the DisplayPort on the " +"dock\n" +" 2. Repeat step 1 for each additional DisplayPorts, if any" +msgstr "" + +#. summary +#: ../units/dock.pxu:637 +msgid "DVI port test on the dock after resuming" +msgstr "" + +#. purpose +#: ../units/dock.pxu:639 +msgid " This test will check the DVI port(s) on the dock after resuming." +msgstr "" + +#. steps +#: ../units/dock.pxu:641 +msgid "" +" Skip this test if the dock does not have a DVI port.\n" +" 1. Connect a display (if not already connected) to the DVI port on the " +"dock\n" +" 2. Repeat step 1 for each additional DVI port, if any" +msgstr "" + +#. summary +#: ../units/dock.pxu:651 +msgid "HDMI port test on the dock after resuming" +msgstr "" + +#. purpose +#: ../units/dock.pxu:653 +msgid " This test will check the HDMI port(s) on the dock after resuming." +msgstr "" + +#. steps +#: ../units/dock.pxu:655 +msgid "" +" Skip this test if the dock does not have a HDMI port.\n" +" 1. Connect a display (if not already connected) to the HDMI port on the " +"dock\n" +" 2. Repeat step 1 for each additional HDMI port, if any" +msgstr "" + +#. summary +#: ../units/dock.pxu:665 +msgid "VGA port test on the dock after resuming" +msgstr "" + +#. purpose +#: ../units/dock.pxu:667 +msgid " This test will check the VGA port(s) on the dock after resuming." +msgstr "" + +#. steps +#: ../units/dock.pxu:669 +msgid "" +" Skip this test if the dock does not have a VGA port.\n" +" 1. Connect a display (if not already connected) to the VGA port on the " +"dock\n" +" 2. Repeat step 1 for each additional VGA port, if any" +msgstr "" + +#. summary +#: ../units/dock.pxu:679 +msgid "Suspend the device, undock it and resume it" +msgstr "" + +#. purpose +#: ../units/dock.pxu:680 +msgid "" +" This test will check the device can be suspended, undocked and resumed " +"properly" +msgstr "" + +#. steps +#: ../units/dock.pxu:682 +msgid "" +" 1. If the laptop is currently undocked, dock it now\n" +" 2. Suspend the laptop (e.g. by closing its lid)\n" +" 3. Undock the laptop\n" +" 4. Resume the laptop (e.g. by pressing its Power button)" +msgstr "" + +#. verification +#: ../units/dock.pxu:687 +msgid " Is the device working as expected after being undocked and resumed?" +msgstr "" + +#. summary +#: ../units/dock.pxu:694 +msgid "Wireless connection after suspend (WPA BG)" +msgstr "" + +#. summary +#: ../units/dock.pxu:717 +msgid "Wireless connection after suspend (Open BG)" +msgstr "" + +#. summary +#: ../units/dock.pxu:740 +msgid "Wireless connection after suspend (WPA N)" +msgstr "" + +#. summary +#: ../units/dock.pxu:763 +msgid "Wireless connection after suspend (Open N)" +msgstr "" + +#. summary +#: ../units/dock.pxu:786 +msgid "Wireless connection after suspend (WPA AC)" +msgstr "" + +#. summary +#: ../units/dock.pxu:810 +msgid "Wireless connection after suspend (Open AC)" +msgstr "" + +#. summary +#: ../units/dock.pxu:833 +msgid "Audio after resuming test" +msgstr "" + +#. summary +#: ../units/dock.pxu:846 +msgid "Record playback after resuming" +msgstr "" + +#. summary +#: ../units/dock.pxu:863 +msgid "ExpressCard slot verification" +msgstr "" + +#. purpose +#: ../units/dock.pxu:865 +msgid "" +" This will verify that an ExpressCard slot on the dock can detect inserted " +"devices." +msgstr "" + +#. steps +#: ../units/dock.pxu:867 +msgid "" +" Skip this test if you do not have an ExpressCard slot on the dock.\n" +" 1. Plug an ExpressCard device into the ExpressCard slot" +msgstr "" + +#. verification +#: ../units/dock.pxu:870 +msgid " Was the device correctly detected?" +msgstr "" + +#. summary +#: ../units/dock.pxu:876 +msgid "FireWire HDD insertion test" +msgstr "" + +#. purpose +#: ../units/dock.pxu:879 +msgid "" +" This test will check the system can detect the insertion of a FireWire " +"HDD on the dock" +msgstr "" + +#. steps +#: ../units/dock.pxu:881 +msgid "" +" (Skip this test id there is no FireWire connector on the dock)\n" +" 1. Click 'Test' to begin the test. This test will\n" +" timeout and fail if the insertion has not been detected within 20 " +"seconds.\n" +" 2. Plug a FireWire HDD into an available FireWire port." +msgstr "" + +#. summary +#: ../units/dock.pxu:893 +msgid "FireWire HDD storage test" +msgstr "" + +#. summary +#: ../units/dock.pxu:904 +msgid "FireWire HDD removal test" +msgstr "" + +#. purpose +#: ../units/dock.pxu:907 +msgid "" +" This test will check the system can detect the removal of a FireWire HDD" +msgstr "" + +#. steps +#: ../units/dock.pxu:909 +msgid "" +" 1. Click 'Test' to begin the test. This test will timeout and fail if\n" +" the removal has not been detected within 20 seconds.\n" +" 2. Remove the previously attached FireWire HDD from the FireWire port on\n" +" the dock." +msgstr "" + +#. summary +#: ../units/dock.pxu:921 +msgid "eSATA HDD insertion test" +msgstr "" + +#. purpose +#: ../units/dock.pxu:924 +msgid "" +" This test will check the system can detect the insertion of an eSATA HDD " +"on the dock" +msgstr "" + +#. steps +#: ../units/dock.pxu:926 +msgid "" +" (Skip this test if there are no eSATA connectors on the dock)\n" +" 1. Click 'Test' to begin the test. This test will\n" +" timeout and fail if the insertion has not been detected within 20 " +"seconds.\n" +" 2. Plug an eSATA HDD into an available eSATA port on the dock." +msgstr "" + +#. summary +#: ../units/dock.pxu:938 +msgid "eSATA HDD storage test" +msgstr "" + +#. summary +#: ../units/dock.pxu:949 +msgid "eSATA HDD removal test" +msgstr "" + +#. purpose +#: ../units/dock.pxu:952 +msgid "" +" This test will check the system can detect the removal of an eSATA HDD " +"from the dock" +msgstr "" + +#. steps +#: ../units/dock.pxu:954 +msgid "" +" 1. Click 'Test' to begin the test. This test will timeout and fail if\n" +" the removal has not been detected within 20 seconds.\n" +" 2. Remove the previously attached eSATA HDD from the eSATA port on the " +"dock." +msgstr "" + +#. summary +#: ../units/dock.pxu:966 +msgid "Optical media (CD) read test" +msgstr "" + +#. purpose +#: ../units/dock.pxu:967 +msgid " This test will check the dock's ability to read CD media" +msgstr "" + +#. steps +#: ../units/dock.pxu:969 +msgid "" +" (Skip this test if the dock does not have an optical reader)\n" +" 1. Insert appropriate non-blank media into your optical drive(s). Movie " +"and Audio Disks may not work. Self-created data disks have the greatest " +"chance of working.\n" +" 2. Try to copy a few files from the optical media to the computer." +msgstr "" + +#. verification +#: ../units/dock.pxu:973 +msgid " Are the files properly copied to the computer?" +msgstr "" + +#. summary +#: ../units/dock.pxu:980 +msgid "Optical media (CD-RW, DVD-RW) writing test" +msgstr "" + +#. purpose +#: ../units/dock.pxu:981 +msgid "" +" This test will check the dock's ability to write CD/DVD media.\n" +" Depending on what the dock's optical drive support, you will need\n" +" a blank CD-R, CD-RW, DVD-R and/or DVD-RW." +msgstr "" + +#. steps +#: ../units/dock.pxu:985 +msgid "" +" 1. Insert a blank CD-R into the dock's drive\n" +" 2. Open Brasero Disc Burner and write some files on the CD-R\n" +" 3. Repeat steps 1-2 for other compatible media (CD-RW, DVD-R, DVD-RW)" +msgstr "" + +#. verification +#: ../units/dock.pxu:989 +msgid " Are all kinds of discs properly written?" +msgstr "" + +#. summary +#: ../units/dock.pxu:997 +msgid "Thunderbolt storage insertion detection" +msgstr "" + +#. purpose +#: ../units/dock.pxu:998 +msgid "" +" This test will check if the connection of a Thunderbolt HDD to the dock " +"could be detected" +msgstr "" + +#. steps +#: ../units/dock.pxu:1000 +msgid "" +" 1. Click 'Test' to begin the test. This test will\n" +" timeout and fail if the insertion has not been detected within 40 " +"seconds.\n" +" 2. Plug a Thunderbolt HDD into an available Thunderbolt port on the " +"dock;\n" +" if it's not mounted automatically, please click the HDD icon to mount " +"it." +msgstr "" + +#. summary +#: ../units/dock.pxu:1015 +msgid "Thunderbolt storage test" +msgstr "" + +#. summary +#: ../units/dock.pxu:1025 +msgid "Thunderbolt storage removal detection" +msgstr "" + +#. purpose +#: ../units/dock.pxu:1026 +msgid "" +" This test will check the system can detect the removal of a Thunderbolt " +"HDD" +msgstr "" + +#. steps +#: ../units/dock.pxu:1028 +msgid "" +" 1. Click 'Test' to begin the test. This test will timeout and fail if\n" +" the removal has not been detected within 20 seconds.\n" +" 2. Remove the previously attached Thunderbolt HDD from the Thunderbolt " +"port." +msgstr "" + +#. verification +#: ../units/dock.pxu:1032 +msgid "" +" The verification of this test is automated. Do not change the " +"automatically\n" +" selected result" +msgstr "" + +#. name +#: ../units/hwsubmit.pxu:2 +msgid "All HW Information Submit Tests" +msgstr "" + +#. name +#: ../units/smoke.pxu:2 +msgid "All Smoke Tests" +msgstr "" + +#. description +#: ../units/smoke.pxu:4 +msgid "" +" This is an example test plan to start from.\n" +" To use, copy this file and add the jobs you want to run to the copy. " +"Delete\n" +" these comments. DO NOT delete the first 9 jobs in tis file.\n" +" They are resource gathering jobs and are necessary to do any testing at " +"all." +msgstr "" |