How to use Playwright with GitHub Actions and GitHub Pages

Introduction

Playwright is a modern cross-browser testing framework developed by microsoft itself.
GitHub Actions is the out-of-the-box solution for anything related to CI/CD pipelines on GitHub.
Last but not least GitHub Pages is a GitHub feature which allows to deploy static websites.

And all of this comes completely free for public repositories!

In this blog post I will show you how to setup a basic a Playwright project, integrate it into GitHub Actions and finally deploy an HTML report of the test results to GitHub Pages.

ℹ️ INFO
The complete source code can be found in this repo: ysfaran/playwright-gh-actions-gh-pages

This post is not focusing on explaining all concepts of Playwright, but rather how to connect Playwright, GitHub Actions and GitHub Pages in a easy, non-cost way.

Setup Playwright

💡TIP
For an up-to-date installation guide please always refer to https://playwright.dev/docs/intro. At the point of writing this posts Playwright's latest version was 1.25.1.

Fortunately Playwright makes it really easy to setup a new project using the CLI:

yarn create playwright 

This will start an interactive session. Make sure to at least enable GitHub Action workflow generation. Following is the configuration I used:

✔ Do you want to use TypeScript or JavaScript? · TypeScript ✔ Where to put your end-to-end tests? · tests ✔ Add a GitHub Actions workflow? (y/N) · true 

Generate HTML Report

One of the most important generated files is playwright.config.ts, so let's have a look at it:

ℹ️ INFO
I simplified some of the generated files. For a full list of these changes see aab0b9c2.

const config: PlaywrightTestConfig = { testDir: "./tests", // Run all tests within a file in parallel to speed up test execution fullyParallel: true, // Helpful for uncontrollable flaky tests, which are tests, occasionally failing for various reasons retries: 3, // Generates a HTML report to ./playwright-report/ reporter: "html", use: { // Tests will be run against this page baseURL: "https://playwright.dev/", // Collect trace when retrying the failed test. See https://playwright.dev/docs/trace-viewer trace: "on-first-retry", }, // Cross-browser testing setup projects: [ { name: "chromium", use: { ...devices["Desktop Chrome"], }, }, { name: "firefox", use: { ...devices["Desktop Firefox"], }, }, { name: "webkit", use: { ...devices["Desktop Safari"], }, }, ], }; 

Since the html reporter is already enabled by default, there are no other adaption necessary.
To get a nice HTML report covering all test result cases (sucess, fail and flaky) following tests have been implemented:

import { test, expect } from "@playwright/test"; test.beforeEach(({ page }) => page.goto("https://playwright.dev/")); test("should succeed", async ({ page }) => { await expect(page).toHaveTitle(/Playwright/); }); test("should fail", async ({ page }) => { await expect(page).not.toHaveTitle(/Playwright/); }); test("should be flaky", async ({ page }) => { if (Math.random() > 0.5) { await expect(page).toHaveTitle(/Playwright/); } else { await expect(page).not.toHaveTitle(/Playwright/); } }); 

To run the tests execute:

npx playwright test 

After running all tests Playwright prints a summary of test restuls and publishes the HTML report to a server at a localhost address. Playwright also emits all sources for the HTML report to playwright-report/.

Integrate GitHub Actions

Luckily Playwright already generated a basic .github/workflows/playwright.yml during Setup Playwright to integrate Playwright tests into a GitHub Actions worklow:

name: Playwright Tests on: push: branches: [main, master] jobs: test: timeout-minutes: 60 runs-on: ubuntu-latest steps: - uses: actions/checkout@v2 - uses: actions/setup-node@v2 with: node-version: "14.x" - name: Install dependencies run: yarn - name: Install Playwright Browsers run: npx playwright install --with-deps - name: Run Playwright tests run: yarn playwright test - uses: actions/upload-artifact@v2 if: always() with: name: playwright-report path: playwright-report/ retention-days: 30 

Essentially the workflow is triggered on every push and executes the all tests, just like you would do it locally.
It's important to note that it also uploads the Playwright HTML report as workflow artifact.
This artifact will be available to download in the Actions tab of your GitHub repository in each workflow run.

Please refer to the official Playwright docs on how to download and view HTML report files of a specific workflow run.

Publish HTML Report to GitHub Pages

Being able to download, view and debug HTML reports generate by a CI/CD pipeline locally is already convenient, but there is an easier and faster way to check test results: automatically publish the HTML reports to GitHub Pages and view them directly in the browser.

Firstly a new orphan branch, which means the branch has no parent commit, for the GitHub Pages' static content needs to be created:

# Create a new branch without any commit on it git checkout --orphan gh-pages # Source files get autoamtically staged so remove them from git git rm -rf . # Optional: Check if there are really no files in the git staging area anymore git status # Create an initial, empty commit git commit --allow-empty -m "setup empty branch for GitHub Pages" # Push the branch to make it available online git push --set-upstream origin gh-pages 

Secondly the GitHub Pages feature needs to be enabled for your repo. Usually GitHub is enabling GitHub Pages automatically when you name a branch gh-pages.
If it doesn't, make sure to enable GitHub Pages manually in your repository settings:

Any change that is pushed to gh-pages will now automatically update the GitHub Pages website, which is publicly available at https://<user>.github.io/<repo>/.
Because there is no real commit on the gh-pages branch yet a 404 error page will be shown.

So the next logical step is to add a new job to the GitHub Actions workflow in order to push the HTML reports to gh-pages branch:

publish_report: name: Publish HTML Report # using always() is not ideal here, because it would also run if the workflow was cancelled if: "success() || needs.test.result == 'failure'" needs: [test] runs-on: ubuntu-latest continue-on-error: true env: # Unique URL path for each workflow run attempt HTML_REPORT_URL_PATH: reports/${{ github.ref_name }}/${{ github.run_id }}/${{ github.run_attempt }} steps: - name: Checkout GitHub Pages Branch uses: actions/checkout@v2 with: ref: gh-pages - name: Set Git User # see: https://github.com/actions/checkout/issues/13#issuecomment-724415212 run: | git config --global user.name "github-actions[bot]" git config --global user.email "41898282+github-actions[bot]@users.noreply.github.com" - name: Download zipped HTML report uses: actions/download-artifact@v2 with: name: playwright-report path: ${{ env.HTML_REPORT_URL_PATH }} - name: Push HTML Report timeout-minutes: 3 # commit report, then try push-rebase-loop until it's able to merge the HTML report to the gh-pages branch # this is necessary when this job is running at least twice at the same time (e.g. through two pushes at the same time) run: | git add . git commit -m "workflow: add HTML report for run-id ${{ github.run_id }} (attempt: ${{ github.run_attempt }})" while true; do git pull --rebase if [ $? -ne 0 ]; then echo "Failed to rebase. Please review manually." exit 1 fi git push if [ $? -eq 0 ]; then echo "Successfully pushed HTML report to repo." exit 0 fi done - name: Output Report URL as Worfklow Annotation run: | FULL_HTML_REPORT_URL=https://ysfaran.github.io/playwright-gh-actions-gh-pages/$HTML_REPORT_URL_PATH echo "::notice title=📋 Published Playwright Test Report::$FULL_HTML_REPORT_URL" 

Basically this job commits the HTML report files to the gh-pages branch, which will then automatically redploy the website.

It does so by specifying a new unique path for each test result:

HTML_REPORT_URL_PATH: reports/${{ github.ref_name }}/${{ github.run_id }}/${{ github.run_attempt }} 

The job then tries to push these changes and rebases if necessary until a push was succssful.
Rebasing is safe here, because - as already mentioned - each workflow run gets its own uniquie path, so there can't be any file conflicts ever.

Last but not least the publicly available URL is printed as GitHub Worfklow Annotation:

💡 TIP
It might take some while for GitHub Pages to update its content after a new push, so the printed URL will point to a 404 page initially.
In the Actions tab of your repo you can check pages-build-deployment workflow runs, which is automatically triggered for GitHub Pages, to see if the GitHub Pages deployment was successful.

Add Multi-Branch Support

Only in rare cases you work on a single branch. Also the pipeline is currently not integrated in any pull request process, meaning that there are no restriction to push or even force push to your main/master.
Its time to change that!

First of all we need to enable branch protections rules for the default branch:

1. Go to the settings of your repo
2. Select Branches under Code and automation in the menu
3. Hit the Add branch protection rule button
4. Add your default branchs name for Branch name pattern
5. Configure your branch protecting rules as desired, most importantly being:

Note that I only put Test under Status checks that are required. because you should still be allowed to merge to main branch if some HTML report couldn't be published.
A green Test job for a branch represents a valid state anyway in this case.

Secondly the workflow needs to be adapted:

on:  push: - branches: [ main, master ] - pull_request: - branches: [ main, master ] + branches-ignore: [ main, gh-pages ] 

So the workflow is triggered after each push on every branch except main and gh-pages.
I purposely removed pull_request here, because it's really hard (at this point in time) to make push and pull_requests work together with GitHub Actions.
Feel free to check my answer on StackOverflow answer regarding this topic.

⚠️ CAUTION
If you want to work with pull_request every occurence of ${{ github.ref_name }} should be replaces with ${{ github.head_ref || github.ref_name }}.
Check the related StackOverflow answer for details: https://stackoverflow.com/a/71158878/6489012.

I also highly recommend to enable concurrency groups in your workflow file to make sure only one workflow is running at the same time for each branch:

concurrency: group: ${{ github.ref_name }} # optional cancel-in-progress: true 

Delete Reports from GitHub Pages

After a branch was successfully merged it makes sense to delete all corresponding HTML reports from GitHub Pages. This requires the implementation of a new workflow file:

name: Delete on: delete: branches-ignore: [main, gh-pages] # ensures that currently running Playwright workflow of deleted branch gets cancelled concurrency: group: ${{ github.event.ref }} cancel-in-progress: true jobs: delete_reports: name: Delete Reports runs-on: ubuntu-latest env: # Contains all reports for deleted branch BRANCH_REPORTS_DIR: reports/${{ github.event.ref }} steps: - name: Checkout GitHub Pages Branch uses: actions/checkout@v2 with: ref: gh-pages - name: Set Git User # see: https://github.com/actions/checkout/issues/13#issuecomment-724415212 run: | git config --global user.name "github-actions[bot]" git config --global user.email "41898282+github-actions[bot]@users.noreply.github.com" - name: Check for workflow reports run: | if [ -z "$(ls -A $BRANCH_REPORTS_DIR)" ]; then echo "BRANCH_REPORTS_EXIST="false"" >> $GITHUB_ENV else echo "BRANCH_REPORTS_EXIST="true"" >> $GITHUB_ENV fi - name: Delete reports from repo for branch if: ${{ env.BRANCH_REPORTS_EXIST == 'true' }} timeout-minutes: 3 run: | cd $BRANCH_REPORTS_DIR/.. rm -rf ${{ github.event.ref }} git add . git commit -m "workflow: remove all reports for branch ${{ github.event.ref }}" while true; do git pull --rebase if [ $? -ne 0 ]; then echo "Failed to rebase. Please review manually." exit 1 fi git push if [ $? -eq 0 ]; then echo "Successfully pushed HTML reports to repo." exit 0 fi done 

The job of this workflow is pretty similiar to the one publishing the HTML report. This time it's just the other way around: gh-pages branch is checked out and the folder reports/<branch-name> is deleted.
Then the same push-rebase loop is initated to trigger a GitHub Pages deployment.

Important to note here is the following part:

ℹ️ INFO
This time the name of the (deleted) branch is neither retreived by github.head_ref and github.ref_name, but github.event.ref.
In case the workflow was triggered by a delete the value of github.ref_name will be the one of the default branch, here main.

concurrency: group: ${{ github.event.ref }} cancel-in-progress: true 

This statement makes sure that any running workflow within the same concurrency group will be cancelled.
In our case this means if tests for a deleted branch are still running, they will be cancelled.

Conclusion

We created a Playwright project from scratch, integrated tests in GitHub Actions, deployed test results to GitHub Pages and finally established branch protections rules with a simple but important pull request strategy.
All of this, without any costs.

All in all it's all about automation and process optimization. Keeping a team busy with daunting manual tasks can decrease effincy and motivation quite a bit.
This can go from manual deployment plans to smaller aspects like hard to debug test results. In the long run saving some minutes of daily, manual work can have a huge impact.

Questions and feedback are always welcome. 🙂