Command-line commands

There are two different ways of invoking Meson. First, you can run it directly from the source tree with the command /path/to/source/meson.py. Meson may also be installed in which case the command is simply meson. In this manual we only use the latter format for simplicity.

Meson is invoked using the following syntax: meson [COMMAND] [COMMAND_OPTIONS]

This section describes all available commands and some of their Optional arguments. The most common workflow is to run setup, followed by compile, and then install.

For the full list of all available options for a specific command use the following syntax: meson COMMAND --help

configure

$ meson configure [-h] [--prefix PREFIX] [--bindir BINDIR] [--datadir DATADIR] [--includedir INCLUDEDIR] [--infodir INFODIR] [--libdir LIBDIR] [--licensedir LICENSEDIR] [--libexecdir LIBEXECDIR] [--localedir LOCALEDIR] [--localstatedir LOCALSTATEDIR] [--mandir MANDIR] [--sbindir SBINDIR] [--sharedstatedir SHAREDSTATEDIR] [--sysconfdir SYSCONFDIR] [--auto-features {enabled,disabled,auto}] [--backend {ninja,vs,vs2010,vs2012,vs2013,vs2015,vs2017,vs2019,vs2022,xcode,none}] [--genvslite {vs2022}] [--buildtype {plain,debug,debugoptimized,release,minsize,custom}] [--debug] [--default-library {shared,static,both}] [--default-both-libraries {shared,static,auto}] [--errorlogs] [--install-umask INSTALL_UMASK] [--layout {mirror,flat}] [--optimization {plain,0,g,1,2,3,s}] [--prefer-static] [--stdsplit] [--strip] [--unity {on,off,subprojects}] [--unity-size UNITY_SIZE] [--warnlevel {0,1,2,3,everything}] [--werror] [--wrap-mode {default,nofallback,nodownload,forcefallback,nopromote}] [--force-fallback-for FORCE_FALLBACK_FOR] [--vsenv] [--pkgconfig.relocatable] [--python.bytecompile PYTHON.BYTECOMPILE] [--python.install-env {auto,prefix,system,venv}] [--python.platlibdir PYTHON.PLATLIBDIR] [--python.purelibdir PYTHON.PURELIBDIR] [--python.allow-limited-api] [--pkg-config-path PKG_CONFIG_PATH] [--build.pkg-config-path BUILD.PKG_CONFIG_PATH] [--cmake-prefix-path CMAKE_PREFIX_PATH] [--build.cmake-prefix-path BUILD.CMAKE_PREFIX_PATH] [-D option] [--clearcache] [--no-pager] [-U UNSET_OPTS] [builddir] 

Changes options of a configured meson project.

positional arguments: builddir options: -h, --help show this help message and exit --prefix PREFIX Installation prefix. --bindir BINDIR Executable directory. --datadir DATADIR Data file directory. --includedir INCLUDEDIR Header file directory. --infodir INFODIR Info page directory. --libdir LIBDIR Library directory. --licensedir LICENSEDIR Licenses directory (default: ). --libexecdir LIBEXECDIR Library executable directory. --localedir LOCALEDIR Locale data directory. --localstatedir LOCALSTATEDIR Localstate data directory. --mandir MANDIR Manual page directory. --sbindir SBINDIR System executable directory. --sharedstatedir SHAREDSTATEDIR Architecture-independent data directory. --sysconfdir SYSCONFDIR Sysconf data directory. --auto-features {enabled,disabled,auto} Override value of all 'auto' features (default: auto). --backend {ninja,vs,vs2010,vs2012,vs2013,vs2015,vs2017,vs2019,vs2022,xcode,none} Backend to use (default: ninja). --genvslite {vs2022} Setup multiple buildtype-suffixed ninja- backend build directories, and a [builddir]_vs containing a Visual Studio meta-backend with multiple configurations that calls into them (default: vs2022). --buildtype {plain,debug,debugoptimized,release,minsize,custom} Build type to use (default: debug). --debug Enable debug symbols and other information --default-library {shared,static,both} Default library type (default: shared). --default-both-libraries {shared,static,auto} Default library type for both_libraries (default: shared). --errorlogs Whether to print the logs from failing tests --install-umask INSTALL_UMASK Default umask to apply on permissions of installed files (default: 0o22). --layout {mirror,flat} Build directory layout (default: mirror). --optimization {plain,0,g,1,2,3,s} Optimization level (default: 0). --prefer-static Whether to try static linking before shared linking --stdsplit Split stdout and stderr in test logs --strip Strip targets on install --unity {on,off,subprojects} Unity build (default: off). --unity-size UNITY_SIZE Unity block size (default: 4). --warnlevel {0,1,2,3,everything} Compiler warning level to use (default: 1). --werror Treat warnings as errors --wrap-mode {default,nofallback,nodownload,forcefallback,nopromote} Wrap mode (default: default). --force-fallback-for FORCE_FALLBACK_FOR Force fallback for those subprojects (default: []). --vsenv Activate Visual Studio environment --pkgconfig.relocatable Generate pkgconfig files as relocatable --python.bytecompile PYTHON.BYTECOMPILE Whether to compile bytecode (default: 0). --python.install-env {auto,prefix,system,venv} Which python environment to install to (default: prefix). --python.platlibdir PYTHON.PLATLIBDIR Directory for site-specific, platform- specific files (default: ). --python.purelibdir PYTHON.PURELIBDIR Directory for site-specific, non- platform-specific files (default: ). --python.allow-limited-api Whether to allow use of the Python Limited API --pkg-config-path PKG_CONFIG_PATH List of additional paths for pkg-config to search (default: []). (just for host machine) --build.pkg-config-path BUILD.PKG_CONFIG_PATH List of additional paths for pkg-config to search (default: []). (just for build machine) --cmake-prefix-path CMAKE_PREFIX_PATH List of additional prefixes for cmake to search (default: []). (just for host machine) --build.cmake-prefix-path BUILD.CMAKE_PREFIX_PATH List of additional prefixes for cmake to search (default: []). (just for build machine) -D option Set the value of an option, can be used several times to set multiple options. --clearcache Clear cached state (e.g. found dependencies) --no-pager Do not redirect output to a pager -U UNSET_OPTS Remove a subproject option. 

Most arguments are the same as in setup.

Note: reconfiguring project will not reset options to their default values (even if they were changed in meson.build).

Examples:

List all available options:

meson configure builddir 

Change value of a single option:

meson configure builddir -Doption=new_value 

compile

(since 0.54.0)

$ meson compile [-h] [--clean] [-C WD] [-j JOBS] [-l LOAD_AVERAGE] [-v] [--ninja-args NINJA_ARGS] [--vs-args VS_ARGS] [--xcode-args XCODE_ARGS] [TARGET ...] 

Builds a default or a specified target of a configured Meson project.

positional arguments: TARGET Targets to build. Target has the following format: [PATH_TO_TARGET/]TARGE T_NAME.TARGET_SUFFIX[:TARGET_TYPE]. options: -h, --help show this help message and exit --clean Clean the build directory. -C WD directory to cd into before running -j JOBS, --jobs JOBS The number of worker jobs to run (if supported). If the value is less than 1 the build program will guess. -l LOAD_AVERAGE, --load-average LOAD_AVERAGE The system load average to try to maintain (if supported). -v, --verbose Show more verbose output. --ninja-args NINJA_ARGS Arguments to pass to `ninja` (applied only on `ninja` backend). --vs-args VS_ARGS Arguments to pass to `msbuild` (applied only on `vs` backend). --xcode-args XCODE_ARGS Arguments to pass to `xcodebuild` (applied only on `xcode` backend). 

--verbose argument is available since 0.55.0.

Targets

(since 0.55.0)

TARGET has the following syntax [PATH/]NAME.SUFFIX[:TYPE], where:

• NAME: name of the target from meson.build (e.g. foo from executable('foo', ...)).
• SUFFIX: name of the suffix of the target from meson.build (e.g. exe from executable('foo', suffix: 'exe', ...)).
• PATH: path to the target relative to the root meson.build file. Note: relative path for a target specified in the root meson.build is ./.
• TYPE: type of the target. Can be one of the following: 'executable', 'static_library', 'shared_library', 'shared_module', 'custom', 'alias', 'run', 'jar'.

PATH, SUFFIX, and TYPE can all be omitted if the resulting TARGET can be used to uniquely identify the target in meson.build.

Note that SUFFIX did not exist prior to 1.3.0.

Backend specific arguments

(since 0.55.0)

BACKEND-args use the following syntax:

If you only pass a single string, then it is considered to have all values separated by commas. Thus invoking the following command:

$ meson compile --ninja-args=-n,-d,explain 

would add -n, -d and explain arguments to ninja invocation.

If you need to have commas or spaces in your string values, then you need to pass the value with proper shell quoting like this:

$ meson compile "--ninja-args=['a,b', 'c d']" 

Examples:

Build the project:

meson compile -C builddir 

Execute a dry run on ninja backend with additional debug info:

meson compile --ninja-args=-n,-d,explain 

Build three targets: two targets that have the same foo name, but different type, and a bar target:

meson compile foo:shared_library foo:static_library bar 

Produce a coverage html report (if available):

ninja coverage-html 

dist

(since 0.52.0)

$ meson dist [-h] [-C WD] [--allow-dirty] [--formats FORMATS] [--include-subprojects] [--no-tests] 

Generates a release archive from the current source tree.

options: -h, --help show this help message and exit -C WD directory to cd into before running --allow-dirty Allow even when repository contains uncommitted changes. --formats FORMATS Comma separated list of archive types to create. Supports xztar (default), bztar, gztar, and zip. --include-subprojects Include source code of subprojects that have been used for the build. --no-tests Do not build and test generated packages. 

See notes about creating releases for more info.

Examples:

Create a release archive:

meson dist -C builddir 

init

(since 0.45.0)

$ meson init [-h] [-C WD] [-n NAME] [-e EXECUTABLE] [-d DEPS] [-l {c,cpp,cs,cuda,d,fortran,java,objc,objcpp,rust,vala}] [-b] [--builddir BUILDDIR] [-f] [--type {executable,library}] [--version VERSION] [sourcefile ...] 

Creates a basic set of build files based on a template.

positional arguments: sourcefile source files. default: all recognized files in current directory options: -h, --help show this help message and exit -C WD directory to cd into before running -n NAME, --name NAME project name. default: name of current directory -e EXECUTABLE, --executable EXECUTABLE executable name. default: project name -d DEPS, --deps DEPS dependencies, comma-separated -l {c,cpp,cs,cuda,d,fortran,java,objc,objcpp,rust,vala}, --language {c,cpp,cs,cuda,d,fortran,java,objc,objcpp,rust,vala} project language. default: autodetected based on source files -b, --build build after generation --builddir BUILDDIR directory for build -f, --force force overwrite of existing files and directories. --type {executable,library} project type. default: executable based project --version VERSION project version. default: 0.1 

Examples:

Create a project in sourcedir:

meson init -C sourcedir 

env2mfile

This command is experimental and subject to change.

{Since 0.62.0}

$ meson env2mfile [-h] [--debarch DEBARCH] [--gccsuffix GCCSUFFIX] -o OUTFILE [--cross] [--native] [--use-for-build] [--system SYSTEM] [--subsystem SUBSYSTEM] [--kernel KERNEL] [--cpu CPU] [--cpu-family CPU_FAMILY] [--endian {big,little}] 

Create native and cross files from the current environment, typically by sniffing environment variables like CC and CFLAGS.

options: -h, --help show this help message and exit --debarch DEBARCH The dpkg architecture to generate. --gccsuffix GCCSUFFIX A particular gcc version suffix if necessary. -o OUTFILE The output file. --cross Generate a cross compilation file. --native Generate a native compilation file. --use-for-build Use _FOR_BUILD envvars. --system SYSTEM Define system for cross compilation. --subsystem SUBSYSTEM Define subsystem for cross compilation. --kernel KERNEL Define kernel for cross compilation. --cpu CPU Define cpu for cross compilation. --cpu-family CPU_FAMILY Define cpu family for cross compilation. --endian {big,little} Define endianness for cross compilation. 

Examples:

Autodetect the current cross build environment:

meson env2mfile --cross -o current_cross.txt --cpu=arm7a --cpu-family=arm --system=linux 

Generate a cross build using Debian system information:

meson env2mfile --cross --debarch=armhf -o deb_arm_cross.txt 

introspect

$ meson introspect [-h] [--ast] [--benchmarks] [--buildoptions] [--buildsystem-files] [--compilers] [--dependencies] [--scan-dependencies] [--installed] [--install-plan] [--machines] [--projectinfo] [--targets] [--tests] [--backend {ninja,none,vs,vs2010,vs2012,vs2013,vs2015,vs2017,vs2019,vs2022,xcode}] [-a] [-i] [-f] [builddir] 

Displays information about a configured Meson project.

positional arguments: builddir The build directory options: -h, --help show this help message and exit --ast Dump the AST of the meson file. --benchmarks List all benchmarks. --buildoptions List all build options. --buildsystem-files List files that make up the build system. --compilers List used compilers. --dependencies List external dependencies. --scan-dependencies Scan for dependencies used in the meson.build file. --installed List all installed files and directories. --install-plan List all installed files and directories with their details. --machines Information about host, build, and target machines. --projectinfo Information about projects. --targets List top level targets. --tests List all unit tests. --backend {ninja,none,vs,vs2010,vs2012,vs2013,vs2015,vs2017,vs2019,vs2022,xcode} The backend to use for the --buildoptions introspection. -a, --all Print all available information. -i, --indent Enable pretty printed JSON. -f, --force-object-output Always use the new JSON format for multiple entries (even for 0 and 1 introspection commands) 

Examples:

Display basic information about a configured project in builddir:

meson introspect builddir --projectinfo 

install

(since 0.47.0)

$ meson install [-h] [-C WD] [--no-rebuild] [--only-changed] [-q] [--destdir DESTDIR] [-n] [--skip-subprojects [SKIP_SUBPROJECTS]] [--tags TAGS] [--strip] 

Installs the project to the prefix specified in setup.

options: -h, --help show this help message and exit -C WD directory to cd into before running --no-rebuild Do not rebuild before installing. --only-changed Only overwrite files that are older than the copied file. -q, --quiet Do not print every file that was installed. --destdir DESTDIR Sets or overrides DESTDIR environment. (Since 0.57.0) -n, --dry-run Doesn't actually install, but print logs. (Since 0.57.0) --skip-subprojects [SKIP_SUBPROJECTS] Do not install files from given subprojects. (Since 0.58.0) --tags TAGS Install only targets having one of the given tags. (Since 0.60.0) --strip Strip targets even if strip option was not set during configure. (Since 0.62.0) 

See the installation documentation for more info.

Examples:

Install project to prefix:

meson install -C builddir 

Install project to $DESTDIR/prefix:

DESTDIR=/path/to/staging/area meson install -C builddir 

Since 0.60.0 DESTDIR and --destdir can be a path relative to build directory. An absolute path will be set into environment when executing scripts.

reprotest

(since 1.6.0)

$ meson reprotest [-h] [--intermediaries] [mesonargs ...] 

Simple reproducible build tester that compiles the project twice and checks whether the end results are identical.

This command must be run in the source root of the project you want to test.

positional arguments: mesonargs Arguments to pass to "meson setup". options: -h, --help show this help message and exit --intermediaries Check intermediate files. 

Examples

meson reprotest 

Builds the current project with its default settings.

meson reprotest --intermediaries -- --buildtype=debugoptimized 

Builds the target and also checks that all intermediate files like object files are also identical. All command line arguments after the -- are passed directly to the underlying meson invocation. Only use option arguments, i.e. those that start with a dash, Meson sets directory arguments automatically.

rewrite

(since 0.50.0)

$ meson rewrite [-h] [-s SRCDIR] [-V] [-S] {target,tgt,kwargs,default-options,def,command,cmd} ... 

Modifies the Meson project.

options: -h, --help show this help message and exit -s SRCDIR, --sourcedir SRCDIR Path to source directory. -V, --verbose Enable verbose output -S, --skip-errors Skip errors instead of aborting Rewriter commands: Rewrite command to execute {target,tgt,kwargs,default-options,def,command,cmd} target (tgt) Modify a target kwargs Modify keyword arguments default-options (def) Modify the project default options command (cmd) Execute a JSON array of commands 

See the Meson file rewriter documentation for more info.

setup

$ meson setup [-h] [--prefix PREFIX] [--bindir BINDIR] [--datadir DATADIR] [--includedir INCLUDEDIR] [--infodir INFODIR] [--libdir LIBDIR] [--licensedir LICENSEDIR] [--libexecdir LIBEXECDIR] [--localedir LOCALEDIR] [--localstatedir LOCALSTATEDIR] [--mandir MANDIR] [--sbindir SBINDIR] [--sharedstatedir SHAREDSTATEDIR] [--sysconfdir SYSCONFDIR] [--auto-features {enabled,disabled,auto}] [--backend {ninja,vs,vs2010,vs2012,vs2013,vs2015,vs2017,vs2019,vs2022,xcode,none}] [--genvslite {vs2022}] [--buildtype {plain,debug,debugoptimized,release,minsize,custom}] [--debug] [--default-library {shared,static,both}] [--default-both-libraries {shared,static,auto}] [--errorlogs] [--install-umask INSTALL_UMASK] [--layout {mirror,flat}] [--optimization {plain,0,g,1,2,3,s}] [--prefer-static] [--stdsplit] [--strip] [--unity {on,off,subprojects}] [--unity-size UNITY_SIZE] [--warnlevel {0,1,2,3,everything}] [--werror] [--wrap-mode {default,nofallback,nodownload,forcefallback,nopromote}] [--force-fallback-for FORCE_FALLBACK_FOR] [--vsenv] [--pkgconfig.relocatable] [--python.bytecompile PYTHON.BYTECOMPILE] [--python.install-env {auto,prefix,system,venv}] [--python.platlibdir PYTHON.PLATLIBDIR] [--python.purelibdir PYTHON.PURELIBDIR] [--python.allow-limited-api] [--pkg-config-path PKG_CONFIG_PATH] [--build.pkg-config-path BUILD.PKG_CONFIG_PATH] [--cmake-prefix-path CMAKE_PREFIX_PATH] [--build.cmake-prefix-path BUILD.CMAKE_PREFIX_PATH] [-D option] [--native-file NATIVE_FILE] [--cross-file CROSS_FILE] [-v] [--fatal-meson-warnings] [--reconfigure] [--wipe] [--clearcache] [builddir] [sourcedir] 

Configures a build directory for the Meson project.

Deprecated since 0.64.0: This is the default Meson command (invoked if there was no COMMAND supplied). However, supplying the command is necessary to avoid clashes with future added commands, so "setup" should be used explicitly.

Since 1.1.0 --reconfigure is allowed even if the build directory does not already exist, that argument is ignored in that case.

Since 1.3.0 If the build directory already exists, options are updated with their new value given on the command line (-Dopt=value). Unless --reconfigure is also specified, this won't reconfigure immediately. This has the same behaviour as meson configure <builddir> -Dopt=value.

Since 1.3.0 It is possible to clear the cache and reconfigure in a single command with meson setup --clearcache --reconfigure <builddir>.

positional arguments: builddir sourcedir options: -h, --help show this help message and exit --prefix PREFIX Installation prefix. --bindir BINDIR Executable directory. --datadir DATADIR Data file directory. --includedir INCLUDEDIR Header file directory. --infodir INFODIR Info page directory. --libdir LIBDIR Library directory. --licensedir LICENSEDIR Licenses directory (default: ). --libexecdir LIBEXECDIR Library executable directory. --localedir LOCALEDIR Locale data directory. --localstatedir LOCALSTATEDIR Localstate data directory. --mandir MANDIR Manual page directory. --sbindir SBINDIR System executable directory. --sharedstatedir SHAREDSTATEDIR Architecture-independent data directory. --sysconfdir SYSCONFDIR Sysconf data directory. --auto-features {enabled,disabled,auto} Override value of all 'auto' features (default: auto). --backend {ninja,vs,vs2010,vs2012,vs2013,vs2015,vs2017,vs2019,vs2022,xcode,none} Backend to use (default: ninja). --genvslite {vs2022} Setup multiple buildtype-suffixed ninja- backend build directories, and a [builddir]_vs containing a Visual Studio meta-backend with multiple configurations that calls into them (default: vs2022). --buildtype {plain,debug,debugoptimized,release,minsize,custom} Build type to use (default: debug). --debug Enable debug symbols and other information --default-library {shared,static,both} Default library type (default: shared). --default-both-libraries {shared,static,auto} Default library type for both_libraries (default: shared). --errorlogs Whether to print the logs from failing tests --install-umask INSTALL_UMASK Default umask to apply on permissions of installed files (default: 0o22). --layout {mirror,flat} Build directory layout (default: mirror). --optimization {plain,0,g,1,2,3,s} Optimization level (default: 0). --prefer-static Whether to try static linking before shared linking --stdsplit Split stdout and stderr in test logs --strip Strip targets on install --unity {on,off,subprojects} Unity build (default: off). --unity-size UNITY_SIZE Unity block size (default: 4). --warnlevel {0,1,2,3,everything} Compiler warning level to use (default: 1). --werror Treat warnings as errors --wrap-mode {default,nofallback,nodownload,forcefallback,nopromote} Wrap mode (default: default). --force-fallback-for FORCE_FALLBACK_FOR Force fallback for those subprojects (default: []). --vsenv Activate Visual Studio environment --pkgconfig.relocatable Generate pkgconfig files as relocatable --python.bytecompile PYTHON.BYTECOMPILE Whether to compile bytecode (default: 0). --python.install-env {auto,prefix,system,venv} Which python environment to install to (default: prefix). --python.platlibdir PYTHON.PLATLIBDIR Directory for site-specific, platform- specific files (default: ). --python.purelibdir PYTHON.PURELIBDIR Directory for site-specific, non- platform-specific files (default: ). --python.allow-limited-api Whether to allow use of the Python Limited API --pkg-config-path PKG_CONFIG_PATH List of additional paths for pkg-config to search (default: []). (just for host machine) --build.pkg-config-path BUILD.PKG_CONFIG_PATH List of additional paths for pkg-config to search (default: []). (just for build machine) --cmake-prefix-path CMAKE_PREFIX_PATH List of additional prefixes for cmake to search (default: []). (just for host machine) --build.cmake-prefix-path BUILD.CMAKE_PREFIX_PATH List of additional prefixes for cmake to search (default: []). (just for build machine) -D option Set the value of an option, can be used several times to set multiple options. --native-file NATIVE_FILE File containing overrides for native compilation environment. --cross-file CROSS_FILE File describing cross compilation environment. -v, --version show program's version number and exit --fatal-meson-warnings Make all Meson warnings fatal --reconfigure Set options and reconfigure the project. Useful when new options have been added to the project and the default value is not working. --wipe Wipe build directory and reconfigure using previous command line options. Useful when build directory got corrupted, or when rebuilding with a newer version of meson. --clearcache Clear cached state (e.g. found dependencies). Since 1.3.0. 

See Meson introduction page for more info.

Examples:

Configures builddir with default values:

meson setup builddir 

subprojects

(since 0.49.0)

$ meson subprojects [-h] {update,checkout,download,foreach,purge,packagefiles} ... 

Manages subprojects of the Meson project. Since 0.59.0 commands are run on multiple subprojects in parallel by default, use --num-processes=1 if it is not desired.

Since 0.64.0 the update subcommand will not download new wrap files from WrapDB any more. Use meson wrap update command for that instead.

options: -h, --help show this help message and exit Commands: {update,checkout,download,foreach,purge,packagefiles} update Update all subprojects from wrap files checkout Checkout a branch (git only) download Ensure subprojects are fetched, even if not in use. Already downloaded subprojects are not modified. This can be used to pre-fetch all subprojects and avoid downloads during configure. foreach Execute a command in each subproject directory. purge Remove all wrap-based subproject artifacts packagefiles Manage the packagefiles overlay 

test

$ meson test [-h] [--maxfail MAXFAIL] [--repeat REPEAT] [--no-rebuild] [--gdb] [--gdb-path GDB_PATH] [-i] [--list] [--wrapper WRAPPER] [-C WD] [--suite SUITE] [--no-suite SUITE] [--no-stdsplit] [--print-errorlogs] [--benchmark] [--logbase LOGBASE] [-j NUM_PROCESSES] [-v] [-q] [-t TIMEOUT_MULTIPLIER] [--setup SETUP] [--test-args TEST_ARGS] [--max-lines MAX_LINES] [--slice SLICE/NUM_SLICES] [args ...] 

Run tests for the configure Meson project.

positional arguments: args Optional list of test names to run. "testname" to run all tests with that name, "subprojname:testname" to specifically run "testname" from "subprojname", "subprojname:" to run all tests defined by "subprojname". options: -h, --help show this help message and exit --maxfail MAXFAIL Number of failing tests before aborting the test run. (default: 0, to disable aborting on failure) --repeat REPEAT Number of times to run the tests. --no-rebuild Do not rebuild before running tests. --gdb Run test under gdb. --gdb-path GDB_PATH Path to the gdb binary (default: gdb). -i, --interactive Run tests with interactive input/output. --list List available tests. --wrapper WRAPPER wrapper to run tests with (e.g. Valgrind) -C WD directory to cd into before running --suite SUITE Only run tests belonging to the given suite. --no-suite SUITE Do not run tests belonging to the given suite. --no-stdsplit Do not split stderr and stdout in test logs. --print-errorlogs Whether to print failing tests' logs. --benchmark Run benchmarks instead of tests. --logbase LOGBASE Base name for log file. -j NUM_PROCESSES, --num-processes NUM_PROCESSES How many parallel processes to use. -v, --verbose Do not redirect stdout and stderr -q, --quiet Produce less output to the terminal. -t TIMEOUT_MULTIPLIER, --timeout-multiplier TIMEOUT_MULTIPLIER Define a multiplier for test timeout, for example when running tests in particular conditions they might take more time to execute. (<= 0 to disable timeout) --setup SETUP Which test setup to use. --test-args TEST_ARGS Arguments to pass to the specified test(s) or all tests --max-lines MAX_LINES Maximum number of lines to show from a long test log. Since 1.5.0. --slice SLICE/NUM_SLICES Split tests into NUM_SLICES slices and execute slice SLICE. Since 1.8.0. 

See the unit test documentation for more info.

Since 1.2.0 you can use wildcards in args for test names. For example, "bas*" will match all test with names beginning with "bas".

Since 1.2.0 it is an error to provide a test name or wildcard that does not match any test.

Examples:

Run tests for the project:

meson test -C builddir 

Run only specific_test_1 and specific_test_2:

meson test -C builddir specific_test_1 specific_test_2 

wrap

$ meson wrap [-h] {list,search,install,update,info,status,promote,update-db} ... 

An utility to manage WrapDB dependencies.

options: -h, --help show this help message and exit Commands: {list,search,install,update,info,status,promote,update-db} list show all available projects search search the db by name install install the specified project update Update wrap files from WrapDB (Since 0.63.0) info show available versions of a project status show installed and available versions of your projects promote bring a subsubproject up to the master project update-db Update list of projects available in WrapDB (Since 0.61.0) 

See the WrapDB tool documentation for more info.

devenv

(since 0.58.0)

$ meson devenv [-h] [-C BUILDDIR] [--workdir WORKDIR] [--dump [DUMP]] [--dump-format {sh,export,vscode}] ... 

Runs a command, or open interactive shell if no command is provided, with environment setup to run project from the build directory, without installation.

We automatically handle bash and set $PS1 accordingly. If the automatic $PS1 override is not desired (maybe you have a fancy custom prompt), set the $MESON_DISABLE_PS1_OVERRIDE environment variable and use $MESON_PROJECT_NAME when setting the custom prompt, for example with a snippet like the following:

... if [[ -n "${MESON_PROJECT_NAME-}" ]]; then PS1+="[ ${MESON_PROJECT_NAME} ]" fi ... 

These variables are set in environment in addition to those set using meson.add_devenv():

• MESON_DEVENV is defined to '1'.
• MESON_PROJECT_NAME is defined to the main project's name.
• PKG_CONFIG_PATH includes the directory where Meson generates -uninstalled.pc files.
• PATH includes every directory where there is an executable that would be installed into bindir. On windows it also includes every directory where there is a DLL needed to run those executables.
• LD_LIBRARY_PATH includes every directory where there is a shared library that would be installed into libdir. This allows to run system application using custom build of some libraries. For example running system GEdit when building GTK from git. On OSX the environment variable is DYLD_LIBRARY_PATH and PATH on Windows.
• GI_TYPELIB_PATH includes every directory where a GObject Introspection typelib is built. This is automatically set when using gnome.generate_gir().
• GSETTINGS_SCHEMA_DIR Since 0.59.0 includes every directory where a GSettings schemas is compiled. This is automatically set when using gnome.compile_schemas(). Note that this requires GLib >= 2.64 when gnome.compile_schemas() is used in more than one directory.
• QEMU_LD_PREFIX Since 1.0.0 is set to the sys_root value from cross file when cross compiling and that property is defined.

Since 0.62.0 if bash-completion scripts are being installed and the shell is bash, they will be automatically sourced.

Since 0.62.0 when GDB helper scripts (*-gdb.py, *-gdb.gdb, and *-gdb.csm) are installed with a library name that matches one being built, Meson adds the needed auto-load commands into <builddir>/.gdbinit file. When running gdb from top build directory, that file is loaded by gdb automatically. In the case of python scripts that needs to load other python modules, PYTHONPATH may need to be modified using meson.add_devenv().

Since 0.63.0 when cross compiling for Windows WINEPATH is used instead of PATH which allows running Windows executables using wine. Note that since WINEPATH size is currently limited to 1024 characters, paths relative to the root of build directory are used. That means current workdir must be the root of build directory when running wine.

Since 1.1.0 meson devenv --dump [<filename>] command takes an optional filename argument to write the environment into a file instead of printing to stdout.

Since 1.1.0 --dump-format argument has been added to select which shell format should be used. There are currently 3 formats supported:

• sh: Lines are in the format VAR=/prepend:$VAR:/append.
• export: Same as sh but with extra export VAR lines.
• vscode: Same as sh but without $VAR substitution because they do not seems to be properly supported by vscode.

positional arguments: command Command to run in developer environment (default: interactive shell) options: -h, --help show this help message and exit -C BUILDDIR Path to build directory --workdir WORKDIR, -w WORKDIR Directory to cd into before running (default: builddir, Since 1.0.0) --dump [DUMP] Only print required environment (Since 0.62.0) Takes an optional file path (Since 1.1.0) --dump-format {sh,export,vscode} Format used with --dump (Since 1.1.0) 

format

(since 1.5.0)

$ meson format [-h] [-q | -i] [-r] [-c meson.format] [-e] [-o OUTPUT] [sources ...] 

Format specified meson.build documents. For compatibility with muon, fmt is an alias to format.

positional arguments: sources meson source files options: -h, --help show this help message and exit -q, --check-only exit with 1 if files would be modified by meson format -i, --inplace format files in-place -r, --recursive recurse subdirs (requires --check-only or --inplace option) -c meson.format, --configuration meson.format read configuration from meson.format -e, --editor-config try to read configuration from .editorconfig -o OUTPUT, --output OUTPUT output file (implies having exactly one input) 

The configuration file is a .ini file. If a meson.format file exists beside the provided build file to analyze, and no configuration file is provided on the command line, the meson.format file is automatically used.

If no build file is provided on the command line, the meson.build file in current directory is analyzed.

The following options are recognized:

• max_line_length (int): When an array, a dict, a function or a method would be longer that this, it is formatted one argument per line (Default is 80).
• indent_by (str): Indentation to use (Default is four spaces ' ').
• space_array (bool): Whether to add spaces between [] and array arguments (default is false).
• kwargs_force_multiline (bool): If true, arguments are formatted one per line as soon as there is a keyword argument (default is false).
• wide_colon (bool): If true, a space is placed before colon in dict and in keyword arguments (default is false).
• no_single_comma_function (bool): If true, a comma is never appended to function arguments if there is only one argument, even if using multiline arguments (default is false).
• end_of_line ('cr', 'lf', 'crlf', 'native'): Line ending to use (applied when using --output or --inline argument) (default is 'native).
• indent_before_comments (str): Indentation to use before inline comments (default is two spaces ' ').
• simplify_string_literals (bool): When true, multiline strings are converted to single line strings if they don't contain newlines. Formatted strings are converted to normal strings if they don't contain substitutions (default is true).
• insert_final_newline (bool): If true, force the meson.build file to end with a newline character (default is true).
• tab_width (int): Width of tab stops, used to compute line length when indent_by uses tab characters (default is 4).
• sort_files (bool): When true, arguments of files() function are sorted alphabetically (default is true).
• group_arg_value (bool): When true, string argument with -- prefix followed by string argument without -- prefix are grouped on the same line, in multiline arguments (default is false).
• use_editor_config (bool): When true, also uses config from .editorconfig .

The first six options are the same than for the muon fmt command.

It is also possible to use a .editorconfig file, by providing the --editor-config option on the command line, or with the use_editor_config option in the config file.

When --recursive option is specified, meson.build files from subdir are also analyzed (must be used in conjunction with --inplace or --check-only option).

Since 1.7.0 You can use - as source file name to read source from standard input instead of reading it from a file. This cannot be used with --recursive or --inline arguments.

Differences with muon fmt

The meson format command should be compatible with the muon fmt command. However, it has more features, and some differences:

• By default, meson format put two spaces before inline comments, while muon fmt only puts one.
• muon fmt can potentially mix crlf and lf end-of-lines, as it is not aware of them. meson format will always be consistent in the output it produces.
• muon fmt only recognize the indent_by option from .editorconfig files. meson format also recognizes max_line_length, end_of_line, insert_final_newline and tab_width options.
• meson format has many additional format rules (see option list above).