pcb mill built from garbage using basic hand tools and little money

Offline password keeper project created by and for the Hackaday community

A breadboard friendly breakout board for ESP-07 / ESP-12 WiFi modules

I'm making a WiFi shield based on the ESP8266 module and also a library and some example projects.

Drive an elcheapo TM1638 display unit using an ESP8266

A CP2102 3.3V USB To UART converter support 400mA+ current. Good for upload firmware fo ESP8266

Breakoutboard for ESP-01 Wifi-Modul with CH340G USB-Serial converter

a 12cm radius, 3d printed R2-D2 with some motors, servos and blinky stuff that follows lines, persons or just drives around via bluetooth

Hackaday.io power user hideout

A minimal board for PDIP ATmega 1284/644/32 MCU which interfaces easily to a solderless prototype board.

There's not much that's more EDC than a watch. LED matrix-based word watch, inspired by Daniel Rojas's micro word clock recently on the blog

The EZAD9850 Library will get you up and running on the Arduino with inexpensive AD9850 based frequency generator modules.

TinyESP is a tiny size breadboard adapter for ESP-12/ESP-07 ESP8266 WiFi module. It contains a 3.3V voltage LDO, a Reset button and a flash