A prototype for a project that was later implemented on an Atmel ATTiny13A using a Linux toolchain for STM8(S) microcontrollers.

This counts up hours, minutes and seconds on six 7-segment digits, driven by a MAX7219. The current time is set correctly at compile time. The clock source is not precise, so the clock loses or gains at least 10 seconds per day on my STM8S003F3. Brightness is set based on the time of day.

This is not maintained, but hopefully serves as an example of STM8 timers and SPI.

Grab the code:

git clone https://github.com/stecman/stm8s-max7219-test.git cd stm8s-max7219-test # Pull in SDCC compatible STM8S peripheral library git submodule init git submodule update

Once the toolchain below is available:

# Build scons # Flash through STLinkV2 scons flash

This should be available in your distribution's pacakage manager. It can also be installed via Python's pip package manager.

SDCC may be available in your distro's package manager. I recommend installing from source to get the most recent release, as the Debian and Ubuntu repos can be a few versions behind:

# with Git git clone https://github.com/svn2github/sdcc # or with SVN svn co http://svn.code.sf.net/p/sdcc/code/trunk sdcc cd sdcc/sdcc ./configure make sudo make install

stm8flash uses an STLink V1/V2 to program STM8 devices through their SWIM interface.

This needs to be compiled from source currently, which is simple:

git clone https://github.com/vdudouyt/stm8flash cd stm8flash make sudo make install