I2C and SPI driver for the Bosch BME280 Temperature, Humidity, and Barometric Pressure sensor

This driver depends on:

• Adafruit CircuitPython
• Bus Device

Please ensure that the driver and all dependencies are available on the CircuitPython filesystem. This can be most easily achieved by downloading and installing the latest Adafruit library and driver bundle on your device.

On supported GNU/Linux systems like the Raspberry Pi, you can install the driver locally from PyPI. To install for current user:

pip3 install adafruit-circuitpython-bme280

To install system-wide (this may be required in some cases):

sudo pip3 install adafruit-circuitpython-bme280

To install in a virtual environment in your current project:

mkdir project-name && cd project-name python3 -m venv .env source .env/bin/activate pip3 install adafruit-circuitpython-bme280

import board import digitalio import busio import time import adafruit_bme280 # Create library object using our Bus I2C port i2c = busio.I2C(board.SCL, board.SDA) bme280 = adafruit_bme280.Adafruit_BME280_I2C(i2c) # OR create library object using our Bus SPI port #spi = busio.SPI(board.SCK, board.MOSI, board.MISO) #bme_cs = digitalio.DigitalInOut(board.D10) #bme280 = adafruit_bme280.Adafruit_BME280_SPI(spi, bme_cs) # change this to match the location's pressure (hPa) at sea level bme280.sea_level_pressure = 1013.25 while True: print("\nTemperature: %0.1f C" % bme280.temperature) print("Humidity: %0.1f %%" % bme280.humidity) print("Pressure: %0.1f hPa" % bme280.pressure) print("Altitude = %0.2f meters" % bme280.altitude) time.sleep(2)

Contributions are welcome! Please read our Code of Conduct before contributing to help this project stay welcoming.

To build this library locally you'll need to install the circuitpython-build-tools package.

python3 -m venv .env source .env/bin/activate pip3 install circuitpython-build-tools

Once installed, make sure you are in the virtual environment:

source .env/bin/activate

Then run the build:

circuitpython-build-bundles --filename_prefix adafruit-circuitpython-veml6070 --library_location .

Sphinx is used to build the documentation based on rST files and comments in the code. First, install dependencies (feel free to reuse the virtual environment from above):

python3 -m venv .env source .env/bin/activate pip3 install Sphinx sphinx-rtd-theme

Now, once you have the virtual environment activated:

cd docs sphinx-build -E -W -b html . _build/html

This will output the documentation to docs/_build/html. Open the index.html in your browser to view them. It will also (due to -W) error out on any warning like Travis will. This is a good way to locally verify it will pass.