>>> import mip >>> mip.install("github:mcauser/micropython-hdc1080") >>> mip.install("github:mcauser/micropython-hdc1080/examples")

from machine import I2C, Pin from hdc1080 import HDC1080 i2c = I2C(0) i2c.scan() # [64] hdc = HDC1080(i2c) # set humidity resolution (in bits) hdc.config(humid_res=8) hdc.config(humid_res=11) hdc.config(humid_res=14) # as resolution increases, conversion time increases # 8-bit 2.5ms, 11-bit 3.85ms, 14-bit 6.5ms # set temperature resolution (in bits) hdc.config(temp_res=11) hdc.config(temp_res=14) # as resolution increases, conversion time increases # 11-bit 3.65ms, 14-bit 6.35ms # set acquisition mode hdc.config(mode=0) hdc.config(mode=1) # 0 measure temp or humidity # 1 measure temp and humidity # toggle heater hdc.config(heater=0) hdc.config(heater=1) # 0 turns heater off # 1 turns heater on # heater can be used to test the sensor or drive off condensation after long exposure to high humidity hdc.temperature() # eg 20.78735 hdc.humidity() # eg 60.83984 # software reset hdc.reset() # look for the HDC1080 sensor on the I2C bus hdc.check() # returns True if the device was found, otherwise raises an OSError hdc.battery_status() # returns 0 if Vcc > 2.8V # returns 1 if Vcc < 2.8V # useful in low power battery powered systems, to inform user to replace batteries hdc.serial_number() # returns eg 9816972135, a 40-bit unique serial per individual HDC1080 hdc.manufacturer_id() # returns 21577 or 0x5449 # which can be represented as b'TI' for Texas Instruments hdc.device_id() # returns 4176 or 0x1050 # don't ask me why it's 1050 and not 1080 - that's just how it is in the datasheet

import hdc1080.examples.basic

from machine import SoftI2C, Pin i2c = SoftI2C(scl=Pin(22), sda=Pin(21)) from machine import I2C, Pin i2c = I2C(0)