#define USE_ETHERNET_WRAPPER true

// Only one if the following to be true #define USE_UIP_ETHERNET false #define USE_ETHERNET_PORTENTA_H7 false #define USE_NATIVE_ETHERNET false #define USE_QN_ETHERNET false #define USE_ETHERNET false #define USE_ETHERNET2 false #define USE_ETHERNET3 false #define USE_ETHERNET_LARGE false #define USE_ETHERNET_ESP8266 false #define USE_ETHERNET_ENC false #define USE_CUSTOM_ETHERNET false

// Only one if the following to be true #define USE_UIP_ETHERNET false #define USE_ETHERNET_PORTENTA_H7 false #define USE_NATIVE_ETHERNET false #define USE_QN_ETHERNET false #define USE_ETHERNET false #define USE_ETHERNET2 false #define USE_ETHERNET3 false #define USE_ETHERNET_LARGE true #define USE_ETHERNET_ESP8266 false #define USE_ETHERNET_ENC false #define USE_CUSTOM_ETHERNET false

// Only one if the following to be true #define USE_UIP_ETHERNET false #define USE_ETHERNET_PORTENTA_H7 false #define USE_NATIVE_ETHERNET false #define USE_QN_ETHERNET false #define USE_ETHERNET false #define USE_ETHERNET2 false #define USE_ETHERNET3 false #define USE_ETHERNET_LARGE false #define USE_ETHERNET_ESP8266 false #define USE_ETHERNET_ENC true #define USE_CUSTOM_ETHERNET false

// Only one if the following to be true #define USE_UIP_ETHERNET true #define USE_ETHERNET_PORTENTA_H7 false #define USE_NATIVE_ETHERNET false #define USE_QN_ETHERNET false #define USE_ETHERNET false #define USE_ETHERNET2 false #define USE_ETHERNET3 false #define USE_ETHERNET_LARGE false #define USE_ETHERNET_ESP8266 false #define USE_ETHERNET_ENC false #define USE_CUSTOM_ETHERNET false

// Only one if the following to be true #define USE_UIP_ETHERNET false #define USE_ETHERNET_PORTENTA_H7 false #define USE_NATIVE_ETHERNET false #define USE_QN_ETHERNET false #define USE_ETHERNET false #define USE_ETHERNET2 false #define USE_ETHERNET3 true #define USE_ETHERNET_LARGE false #define USE_ETHERNET_ESP8266 false #define USE_ETHERNET_ENC false #define USE_CUSTOM_ETHERNET false

// Only one if the following to be true #define USE_UIP_ETHERNET false #define USE_ETHERNET_PORTENTA_H7 false #define USE_NATIVE_ETHERNET false #define USE_QN_ETHERNET false #define USE_ETHERNET false #define USE_ETHERNET2 false #define USE_ETHERNET3 false #define USE_ETHERNET_LARGE false #define USE_ETHERNET_ESP8266 false #define USE_ETHERNET_ENC false #define USE_CUSTOM_ETHERNET true //Must be placed before #include <EthernetWebServer.h> #include <Ethernet_XYZ.h> ... #include <EthernetWebServer.h>

#define USE_ETHERNET_WRAPPER true

// To override the default CS/SS pin. Don't use unless you know exactly which pin to use #define USE_THIS_SS_PIN 22

 // For ESP8266 // Pin D0(GPIO16) D1(GPIO5) D2(GPIO4) D3(GPIO0) D4(GPIO2) D8 // Ethernet 0 X X X X 0 // Ethernet2 X X X X X 0 // Ethernet3 X X X X X 0 // EthernetLarge X X X X X 0 // Ethernet_ESP8266 0 0 0 0 0 0 // D2 is safe to used for Ethernet, Ethernet2, Ethernet3, EthernetLarge libs // Must use library patch for Ethernet, EthernetLarge libraries //Ethernet.setCsPin (USE_THIS_SS_PIN); Ethernet.init (USE_THIS_SS_PIN); 

 // Use MAX_SOCK_NUM = 4 for 4K, 2 for 8K, 1 for 16K RX/TX buffer #ifndef ETHERNET3_MAX_SOCK_NUM #define ETHERNET3_MAX_SOCK_NUM 4 #endif Ethernet.setCsPin (USE_THIS_SS_PIN); Ethernet.init (ETHERNET3_MAX_SOCK_NUM);

#define SENDCONTENT_P_BUFFER_SZ 2048

EthernetInit();

 EthernetWebServer server(80);

 void begin();

 void handleClient();

 void close(); void stop();

 void on(); void addHandler(); void onNotFound(); void onFileUpload();

 server.on("/", handlerFunction); server.onNotFound(handlerFunction); // called when handler is not assigned server.onFileUpload(handlerFunction); // handle file uploads

 void send(); void send_P();

 const String & arg(); const String & argName(); int args(); bool hasArg();

 const String & header(); const String & headerName(); const String & hostHeader(); int headers(); bool hasHeader();

 bool authenticate(); void requestAuthentication();

 if(!server.authenticate(username, password)){ server.requestAuthentication(); }

 const String & uri(); // get the current uri HTTPMethod method(); // get the current method  WiFiClient client(); // get the current client HTTPUpload & upload(); // get the current upload void setContentLength(); // set content length void sendHeader(); // send HTTP header void sendContent(); // send content void sendContent_P(); void collectHeaders(); // set the request headers to collect void serveStatic(); size_t streamFile();

/*  The Arduino board communicates with the shield using the SPI bus. This is on digital pins 11, 12, and 13 on the Uno  and pins 50, 51, and 52 on the Mega. On both boards, pin 10 is used as SS. On the Mega, the hardware SS pin, 53,  is not used to select the Ethernet controller chip, but it must be kept as an output or the SPI interface won't work. */ #include "defines.h" EthernetWebServer server(80); int reqCount = 0; // number of requests received void handleRoot() { #define BUFFER_SIZE 512 char temp[BUFFER_SIZE]; int sec = millis() / 1000; int min = sec / 60; int hr = min / 60; int day = hr / 24; hr = hr % 24; snprintf(temp, BUFFER_SIZE - 1, "<html>\ <head>\ <meta http-equiv='refresh' content='5'/>\ <title>%s</title>\ <style>\ body { background-color: #cccccc; font-family: Arial, Helvetica, Sans-Serif; Color: #000088; }\ </style>\ </head>\ <body>\ <h1>Hello from %s</h1>\ <h3>running EthernetWebServer</h3>\ <h3>on %s</h3>\ <p>Uptime: %d d %02d:%02d:%02d</p>\ <img src=\"/test.svg\" />\ </body>\ </html>", BOARD_NAME, BOARD_NAME, SHIELD_TYPE, day, hr, min % 60, sec % 60); server.send(200, F("text/html"), temp); } void handleNotFound() { String message = F("File Not Found\n\n"); message += F("URI: "); message += server.uri(); message += F("\nMethod: "); message += (server.method() == HTTP_GET) ? F("GET") : F("POST"); message += F("\nArguments: "); message += server.args(); message += F("\n"); for (uint8_t i = 0; i < server.args(); i++) { message += " " + server.argName(i) + ": " + server.arg(i) + "\n"; } server.send(404, F("text/plain"), message); } #define ORIGINAL_STR_LEN 2048 void drawGraph() { static String out; static uint16_t previousStrLen = ORIGINAL_STR_LEN; if (out.length() == 0) { ET_LOGWARN1(F("String Len = 0, extend to"), ORIGINAL_STR_LEN); out.reserve(ORIGINAL_STR_LEN); } out = F( "<svg xmlns=\"http://www.w3.org/2000/svg\" version=\"1.1\" width=\"310\" height=\"150\">\n" \ "<rect width=\"310\" height=\"150\" fill=\"rgb(250, 230, 210)\" stroke-width=\"3\" stroke=\"rgb(0, 0, 0)\" />\n" \ "<g stroke=\"blue\">\n"); char temp[70]; int y = rand() % 130; for (int x = 10; x < 300; x += 10) { int y2 = rand() % 130; sprintf(temp, "<line x1=\"%d\" y1=\"%d\" x2=\"%d\" y2=\"%d\" stroke-width=\"2\" />\n", x, 140 - y, x + 10, 140 - y2); out += temp; y = y2; } out += F("</g>\n</svg>\n"); ET_LOGDEBUG1(F("String Len = "), out.length()); if (out.length() > previousStrLen) { ET_LOGERROR3(F("String Len > "), previousStrLen, F(", extend to"), out.length() + 48); previousStrLen = out.length() + 48; out.reserve(previousStrLen); } else { server.send(200, "image/svg+xml", out); } } void setup() { Serial.begin(115200); while (!Serial); Serial.print("\nStarting AdvancedWebServer on "); Serial.print(BOARD_NAME); Serial.print(F(" with ")); Serial.println(SHIELD_TYPE); Serial.println(ETHERNET_WEBSERVER_VERSION); #if USE_ETHERNET_WRAPPER EthernetInit(); #else #if USE_ETHERNET_PORTENTA_H7 ET_LOGWARN(F("======== USE_PORTENTA_H7_ETHERNET ========")); #elif USE_NATIVE_ETHERNET ET_LOGWARN(F("======== USE_NATIVE_ETHERNET ========")); #elif USE_ETHERNET ET_LOGWARN(F("=========== USE_ETHERNET ===========")); #elif USE_ETHERNET2 ET_LOGWARN(F("=========== USE_ETHERNET2 ===========")); #elif USE_ETHERNET3 ET_LOGWARN(F("=========== USE_ETHERNET3 ===========")); #elif USE_ETHERNET_LARGE ET_LOGWARN(F("=========== USE_ETHERNET_LARGE ===========")); #elif USE_ETHERNET_ESP8266 ET_LOGWARN(F("=========== USE_ETHERNET_ESP8266 ===========")); #elif USE_ETHERNET_ENC ET_LOGWARN(F("=========== USE_ETHERNET_ENC ===========")); #else ET_LOGWARN(F("=========================")); #endif #if !(USE_NATIVE_ETHERNET || USE_ETHERNET_PORTENTA_H7) ET_LOGWARN(F("Default SPI pinout:")); ET_LOGWARN1(F("MOSI:"), MOSI); ET_LOGWARN1(F("MISO:"), MISO); ET_LOGWARN1(F("SCK:"), SCK); ET_LOGWARN1(F("SS:"), SS); ET_LOGWARN(F("=========================")); #if defined(ESP8266) // For ESP8266, change for other boards if necessary #ifndef USE_THIS_SS_PIN #define USE_THIS_SS_PIN D2 // For ESP8266 #endif ET_LOGWARN1(F("ESP8266 setCsPin:"), USE_THIS_SS_PIN); #if ( USE_ETHERNET || USE_ETHERNET_LARGE || USE_ETHERNET2 || USE_ETHERNET_ENC ) // For ESP8266 // Pin D0(GPIO16) D1(GPIO5) D2(GPIO4) D3(GPIO0) D4(GPIO2) D8 // Ethernet 0 X X X X 0 // Ethernet2 X X X X X 0 // Ethernet3 X X X X X 0 // EthernetLarge X X X X X 0 // Ethernet_ESP8266 0 0 0 0 0 0 // D2 is safe to used for Ethernet, Ethernet2, Ethernet3, EthernetLarge libs // Must use library patch for Ethernet, EthernetLarge libraries Ethernet.init (USE_THIS_SS_PIN); #elif USE_ETHERNET3 // Use MAX_SOCK_NUM = 4 for 4K, 2 for 8K, 1 for 16K RX/TX buffer #ifndef ETHERNET3_MAX_SOCK_NUM #define ETHERNET3_MAX_SOCK_NUM 4 #endif Ethernet.setCsPin (USE_THIS_SS_PIN); Ethernet.init (ETHERNET3_MAX_SOCK_NUM); #elif USE_CUSTOM_ETHERNET // You have to add initialization for your Custom Ethernet here // This is just an example to setCSPin to USE_THIS_SS_PIN, and can be not correct and enough Ethernet.init(USE_THIS_SS_PIN); #endif //( USE_ETHERNET || USE_ETHERNET2 || USE_ETHERNET3 || USE_ETHERNET_LARGE ) #elif defined(ESP32) // You can use Ethernet.init(pin) to configure the CS pin //Ethernet.init(10); // Most Arduino shields //Ethernet.init(5); // MKR ETH shield //Ethernet.init(0); // Teensy 2.0 //Ethernet.init(20); // Teensy++ 2.0 //Ethernet.init(15); // ESP8266 with Adafruit Featherwing Ethernet //Ethernet.init(33); // ESP32 with Adafruit Featherwing Ethernet #ifndef USE_THIS_SS_PIN #define USE_THIS_SS_PIN 22 // For ESP32 #endif ET_LOGWARN1(F("ESP32 setCsPin:"), USE_THIS_SS_PIN); // For other boards, to change if necessary #if ( USE_ETHERNET || USE_ETHERNET_LARGE || USE_ETHERNET2 || USE_ETHERNET_ENC ) // Must use library patch for Ethernet, EthernetLarge libraries // ESP32 => GPIO2,4,5,13,15,21,22 OK with Ethernet, Ethernet2, EthernetLarge // ESP32 => GPIO2,4,5,15,21,22 OK with Ethernet3 //Ethernet.setCsPin (USE_THIS_SS_PIN); Ethernet.init (USE_THIS_SS_PIN); #elif USE_ETHERNET3 // Use MAX_SOCK_NUM = 4 for 4K, 2 for 8K, 1 for 16K RX/TX buffer #ifndef ETHERNET3_MAX_SOCK_NUM #define ETHERNET3_MAX_SOCK_NUM 4 #endif Ethernet.setCsPin (USE_THIS_SS_PIN); Ethernet.init (ETHERNET3_MAX_SOCK_NUM); #elif USE_CUSTOM_ETHERNET // You have to add initialization for your Custom Ethernet here // This is just an example to setCSPin to USE_THIS_SS_PIN, and can be not correct and enough Ethernet.init(USE_THIS_SS_PIN); #endif //( USE_ETHERNET || USE_ETHERNET2 || USE_ETHERNET3 || USE_ETHERNET_LARGE ) #elif ETHERNET_USE_RPIPICO pinMode(USE_THIS_SS_PIN, OUTPUT); digitalWrite(USE_THIS_SS_PIN, HIGH); // ETHERNET_USE_RPIPICO, use default SS = 5 or 17 #ifndef USE_THIS_SS_PIN #if defined(ARDUINO_ARCH_MBED) #define USE_THIS_SS_PIN 5 // For Arduino Mbed core #else #define USE_THIS_SS_PIN 17 // For E.Philhower core #endif #endif ET_LOGWARN1(F("RPIPICO setCsPin:"), USE_THIS_SS_PIN); // For other boards, to change if necessary #if ( USE_ETHERNET || USE_ETHERNET_LARGE || USE_ETHERNET2 || USE_ETHERNET_ENC ) // Must use library patch for Ethernet, EthernetLarge libraries // For RPI Pico using Arduino Mbed RP2040 core // SCK: GPIO2, MOSI: GPIO3, MISO: GPIO4, SS/CS: GPIO5 // For RPI Pico using E. Philhower RP2040 core // SCK: GPIO18, MOSI: GPIO19, MISO: GPIO16, SS/CS: GPIO17 // Default pin 5/17 to SS/CS //Ethernet.setCsPin (USE_THIS_SS_PIN); Ethernet.init (USE_THIS_SS_PIN); #elif USE_ETHERNET3 // Use MAX_SOCK_NUM = 4 for 4K, 2 for 8K, 1 for 16K RX/TX buffer #ifndef ETHERNET3_MAX_SOCK_NUM #define ETHERNET3_MAX_SOCK_NUM 4 #endif Ethernet.setCsPin (USE_THIS_SS_PIN); Ethernet.init (ETHERNET3_MAX_SOCK_NUM); #endif //( USE_ETHERNET || USE_ETHERNET2 || USE_ETHERNET3 || USE_ETHERNET_LARGE ) #else //defined(ESP8266) // unknown board, do nothing, use default SS = 10 #ifndef USE_THIS_SS_PIN #define USE_THIS_SS_PIN 10 // For other boards #endif #if defined(BOARD_NAME) ET_LOGWARN3(F("Board :"), BOARD_NAME, F(", setCsPin:"), USE_THIS_SS_PIN); #else ET_LOGWARN1(F("Unknown board setCsPin:"), USE_THIS_SS_PIN); #endif // For other boards, to change if necessary #if ( USE_ETHERNET || USE_ETHERNET_LARGE || USE_ETHERNET2 || USE_ETHERNET_ENC || USE_NATIVE_ETHERNET ) // Must use library patch for Ethernet, Ethernet2, EthernetLarge libraries Ethernet.init (USE_THIS_SS_PIN); #elif USE_ETHERNET3 // Use MAX_SOCK_NUM = 4 for 4K, 2 for 8K, 1 for 16K RX/TX buffer #ifndef ETHERNET3_MAX_SOCK_NUM #define ETHERNET3_MAX_SOCK_NUM 4 #endif Ethernet.setCsPin (USE_THIS_SS_PIN); Ethernet.init (ETHERNET3_MAX_SOCK_NUM); #elif USE_CUSTOM_ETHERNET // You have to add initialization for your Custom Ethernet here // This is just an example to setCSPin to USE_THIS_SS_PIN, and can be not correct and enough Ethernet.init(USE_THIS_SS_PIN); #endif //( USE_ETHERNET || USE_ETHERNET2 || USE_ETHERNET3 || USE_ETHERNET_LARGE ) #endif // defined(ESP8266) #endif // #if !(USE_NATIVE_ETHERNET) #endif //USE_ETHERNET_WRAPPER // start the ethernet connection and the server: // Use DHCP dynamic IP and random mac uint16_t index = millis() % NUMBER_OF_MAC; // Use Static IP //Ethernet.begin(mac[index], ip); Ethernet.begin(mac[index]); #if !(USE_NATIVE_ETHERNET || USE_ETHERNET_PORTENTA_H7) // Just info to know how to connect correctly Serial.println("========================="); Serial.println("Currently Used SPI pinout:"); Serial.print("MOSI:"); Serial.println(MOSI); Serial.print("MISO:"); Serial.println(MISO); Serial.print("SCK:"); Serial.println(SCK); Serial.print("SS:"); Serial.println(SS); #if USE_ETHERNET3 Serial.print("SPI_CS:"); Serial.println(SPI_CS); #endif Serial.println(F("=========================")); #elif (USE_ETHERNET_PORTENTA_H7) if (Ethernet.hardwareStatus() == EthernetNoHardware) { Serial.println("No Ethernet found. Stay here forever"); while (true) { delay(1); // do nothing, no point running without Ethernet hardware } } if (Ethernet.linkStatus() == LinkOFF) { Serial.println("Not connected Ethernet cable"); } #endif Serial.print(F("Using mac index = ")); Serial.println(index); Serial.print(F("Connected! IP address: ")); Serial.println(Ethernet.localIP()); server.on(F("/"), handleRoot); server.on(F("/test.svg"), drawGraph); server.on(F("/inline"), []() { server.send(200, F("text/plain"), F("This works as well")); }); server.onNotFound(handleNotFound); server.begin(); Serial.print(F("HTTP EthernetWebServer is @ IP : ")); Serial.println(Ethernet.localIP()); } void heartBeatPrint() { static int num = 1; Serial.print(F(".")); if (num == 80) { Serial.println(); num = 1; } else if (num++ % 10 == 0) { Serial.print(F(" ")); } } void check_status() { static unsigned long checkstatus_timeout = 0; #define STATUS_CHECK_INTERVAL 10000L // Send status report every STATUS_REPORT_INTERVAL (60) seconds: we don't need to send updates frequently if there is no status change. if ((millis() > checkstatus_timeout) || (checkstatus_timeout == 0)) { heartBeatPrint(); checkstatus_timeout = millis() + STATUS_CHECK_INTERVAL; } } void loop() { server.handleClient(); check_status(); }

#ifndef defines_h #define defines_h #define DEBUG_ETHERNET_WEBSERVER_PORT Serial // Debug Level from 0 to 4 #define _ETHERNET_WEBSERVER_LOGLEVEL_ 3 #if ( defined(ARDUINO_PORTENTA_H7_M7) || defined(ARDUINO_PORTENTA_H7_M4) ) #if defined(BOARD_NAME) #undef BOARD_NAME #endif #if defined(CORE_CM7) #warning Using Portenta H7 M7 core #define BOARD_NAME "PORTENTA_H7_M7" #else #warning Using Portenta H7 M4 core #define BOARD_NAME "PORTENTA_H7_M4" #endif #define ETHERNET_USE_PORTENTA_H7 true #define USE_ETHERNET_PORTENTA_H7 true #define USE_ETHERNET_WRAPPER false #endif #if ( defined(ARDUINO_SAMD_ZERO) || defined(ARDUINO_SAMD_MKR1000) || defined(ARDUINO_SAMD_MKRWIFI1010) \ || defined(ARDUINO_SAMD_NANO_33_IOT) || defined(ARDUINO_SAMD_MKRFox1200) || defined(ARDUINO_SAMD_MKRWAN1300) || defined(ARDUINO_SAMD_MKRWAN1310) \ || defined(ARDUINO_SAMD_MKRGSM1400) || defined(ARDUINO_SAMD_MKRNB1500) || defined(ARDUINO_SAMD_MKRVIDOR4000) || defined(__SAMD21G18A__) \ || defined(ARDUINO_SAMD_CIRCUITPLAYGROUND_EXPRESS) || defined(__SAMD21E18A__) || defined(__SAMD51__) || defined(__SAMD51J20A__) || defined(__SAMD51J19A__) \ || defined(__SAMD51G19A__) || defined(__SAMD51P19A__) || defined(__SAMD21G18A__) ) #if defined(ETHERNET_USE_SAMD) #undef ETHERNET_USE_SAMD #endif #define ETHERNET_USE_SAMD true #endif #if ( defined(NRF52840_FEATHER) || defined(NRF52832_FEATHER) || defined(NRF52_SERIES) || defined(ARDUINO_NRF52_ADAFRUIT) || \ defined(NRF52840_FEATHER_SENSE) || defined(NRF52840_ITSYBITSY) || defined(NRF52840_CIRCUITPLAY) || defined(NRF52840_CLUE) || \ defined(NRF52840_METRO) || defined(NRF52840_PCA10056) || defined(PARTICLE_XENON) || defined(NINA_B302_ublox) || defined(NINA_B112_ublox) ) #if defined(ETHERNET_USE_NRF528XX) #undef ETHERNET_USE_NRF528XX #endif #define ETHERNET_USE_NRF528XX true #endif #if ( defined(ARDUINO_SAM_DUE) || defined(__SAM3X8E__) ) #if defined(ETHERNET_USE_SAM_DUE) #undef ETHERNET_USE_SAM_DUE #endif #define ETHERNET_USE_SAM_DUE true #endif #if ( defined(ARDUINO_ARCH_RP2040) || defined(ARDUINO_RASPBERRY_PI_PICO) || defined(ARDUINO_ADAFRUIT_FEATHER_RP2040) || defined(ARDUINO_GENERIC_RP2040) ) #if defined(ETHERNET_USE_RPIPICO) #undef ETHERNET_USE_RPIPICO #endif #define ETHERNET_USE_RPIPICO true #endif #if defined(ETHERNET_USE_SAMD) // For SAMD // Default pin 10 to SS/CS #define USE_THIS_SS_PIN 10 #if ( defined(ARDUINO_SAMD_ZERO) && !defined(SEEED_XIAO_M0) ) #define BOARD_TYPE "SAMD Zero" #elif defined(ARDUINO_SAMD_MKR1000) #define BOARD_TYPE "SAMD MKR1000" #elif defined(ARDUINO_SAMD_MKRWIFI1010) #define BOARD_TYPE "SAMD MKRWIFI1010" #elif defined(ARDUINO_SAMD_NANO_33_IOT) #define BOARD_TYPE "SAMD NANO_33_IOT" #elif defined(ARDUINO_SAMD_MKRFox1200) #define BOARD_TYPE "SAMD MKRFox1200" #elif ( defined(ARDUINO_SAMD_MKRWAN1300) || defined(ARDUINO_SAMD_MKRWAN1310) ) #define BOARD_TYPE "SAMD MKRWAN13X0" #elif defined(ARDUINO_SAMD_MKRGSM1400) #define BOARD_TYPE "SAMD MKRGSM1400" #elif defined(ARDUINO_SAMD_MKRNB1500) #define BOARD_TYPE "SAMD MKRNB1500" #elif defined(ARDUINO_SAMD_MKRVIDOR4000) #define BOARD_TYPE "SAMD MKRVIDOR4000" #elif defined(ARDUINO_SAMD_CIRCUITPLAYGROUND_EXPRESS) #define BOARD_TYPE "SAMD ARDUINO_SAMD_CIRCUITPLAYGROUND_EXPRESS" #elif defined(ADAFRUIT_FEATHER_M0_EXPRESS) #define BOARD_TYPE "SAMD21 ADAFRUIT_FEATHER_M0_EXPRESS" #elif defined(ADAFRUIT_METRO_M0_EXPRESS) #define BOARD_TYPE "SAMD21 ADAFRUIT_METRO_M0_EXPRESS" #elif defined(ADAFRUIT_CIRCUITPLAYGROUND_M0) #define BOARD_TYPE "SAMD21 ADAFRUIT_CIRCUITPLAYGROUND_M0" #elif defined(ADAFRUIT_GEMMA_M0) #define BOARD_TYPE "SAMD21 ADAFRUIT_GEMMA_M0" #elif defined(ADAFRUIT_TRINKET_M0) #define BOARD_TYPE "SAMD21 ADAFRUIT_TRINKET_M0" #elif defined(ADAFRUIT_ITSYBITSY_M0) #define BOARD_TYPE "SAMD21 ADAFRUIT_ITSYBITSY_M0" #elif defined(ARDUINO_SAMD_HALLOWING_M0) #define BOARD_TYPE "SAMD21 ARDUINO_SAMD_HALLOWING_M0" #elif defined(ADAFRUIT_METRO_M4_EXPRESS) #define BOARD_TYPE "SAMD51 ADAFRUIT_METRO_M4_EXPRESS" #elif defined(ADAFRUIT_GRAND_CENTRAL_M4) #define BOARD_TYPE "SAMD51 ADAFRUIT_GRAND_CENTRAL_M4" #elif defined(ADAFRUIT_FEATHER_M4_EXPRESS) #define BOARD_TYPE "SAMD51 ADAFRUIT_FEATHER_M4_EXPRESS" #elif defined(ADAFRUIT_ITSYBITSY_M4_EXPRESS) #define BOARD_TYPE "SAMD51 ADAFRUIT_ITSYBITSY_M4_EXPRESS" #define USE_THIS_SS_PIN 10 #elif defined(ADAFRUIT_TRELLIS_M4_EXPRESS) #define BOARD_TYPE "SAMD51 ADAFRUIT_TRELLIS_M4_EXPRESS" #elif defined(ADAFRUIT_PYPORTAL) #define BOARD_TYPE "SAMD51 ADAFRUIT_PYPORTAL" #elif defined(ADAFRUIT_PYPORTAL_M4_TITANO) #define BOARD_TYPE "SAMD51 ADAFRUIT_PYPORTAL_M4_TITANO" #elif defined(ADAFRUIT_PYBADGE_M4_EXPRESS) #define BOARD_TYPE "SAMD51 ADAFRUIT_PYBADGE_M4_EXPRESS" #elif defined(ADAFRUIT_METRO_M4_AIRLIFT_LITE) #define BOARD_TYPE "SAMD51 ADAFRUIT_METRO_M4_AIRLIFT_LITE" #elif defined(ADAFRUIT_PYGAMER_M4_EXPRESS) #define BOARD_TYPE "SAMD51 ADAFRUIT_PYGAMER_M4_EXPRESS" #elif defined(ADAFRUIT_PYGAMER_ADVANCE_M4_EXPRESS) #define BOARD_TYPE "SAMD51 ADAFRUIT_PYGAMER_ADVANCE_M4_EXPRESS" #elif defined(ADAFRUIT_PYBADGE_AIRLIFT_M4) #define BOARD_TYPE "SAMD51 ADAFRUIT_PYBADGE_AIRLIFT_M4" #elif defined(ADAFRUIT_MONSTER_M4SK_EXPRESS) #define BOARD_TYPE "SAMD51 ADAFRUIT_MONSTER_M4SK_EXPRESS" #elif defined(ADAFRUIT_HALLOWING_M4_EXPRESS) #define BOARD_TYPE "SAMD51 ADAFRUIT_HALLOWING_M4_EXPRESS" #elif defined(SEEED_WIO_TERMINAL) #define BOARD_TYPE "SAMD SEEED_WIO_TERMINAL" #elif defined(SEEED_FEMTO_M0) #define BOARD_TYPE "SAMD SEEED_FEMTO_M0" #elif defined(SEEED_XIAO_M0) #define BOARD_TYPE "SAMD SEEED_XIAO_M0" #ifdef USE_THIS_SS_PIN #undef USE_THIS_SS_PIN #endif #define USE_THIS_SS_PIN A1 #warning define SEEED_XIAO_M0 USE_THIS_SS_PIN == A1 #elif defined(Wio_Lite_MG126) #define BOARD_TYPE "SAMD SEEED Wio_Lite_MG126" #elif defined(WIO_GPS_BOARD) #define BOARD_TYPE "SAMD SEEED WIO_GPS_BOARD" #elif defined(SEEEDUINO_ZERO) #define BOARD_TYPE "SAMD SEEEDUINO_ZERO" #elif defined(SEEEDUINO_LORAWAN) #define BOARD_TYPE "SAMD SEEEDUINO_LORAWAN" #elif defined(SEEED_GROVE_UI_WIRELESS) #define BOARD_TYPE "SAMD SEEED_GROVE_UI_WIRELESS" #elif defined(__SAMD21E18A__) #define BOARD_TYPE "SAMD21E18A" #elif defined(__SAMD21G18A__) #define BOARD_TYPE "SAMD21G18A" #elif defined(__SAMD51G19A__) #define BOARD_TYPE "SAMD51G19A" #elif defined(__SAMD51J19A__) #define BOARD_TYPE "SAMD51J19A" #elif defined(__SAMD51J20A__) #define BOARD_TYPE "SAMD51J20A" #elif defined(__SAM3X8E__) #define BOARD_TYPE "SAM3X8E" #elif defined(__CPU_ARC__) #define BOARD_TYPE "CPU_ARC" #elif defined(__SAMD51__) #define BOARD_TYPE "SAMD51" #else #define BOARD_TYPE "SAMD Unknown" #endif #elif (ETHERNET_USE_SAM_DUE) // Default pin 10 to SS/CS #define USE_THIS_SS_PIN 10 #define BOARD_TYPE "SAM DUE" #elif (ETHERNET_USE_NRF528XX) // Default pin 10 to SS/CS #define USE_THIS_SS_PIN 10 #if defined(NRF52840_FEATHER) #define BOARD_TYPE "NRF52840_FEATHER" #elif defined(NRF52832_FEATHER) #define BOARD_TYPE "NRF52832_FEATHER" #elif defined(NRF52840_FEATHER_SENSE) #define BOARD_TYPE "NRF52840_FEATHER_SENSE" #elif defined(NRF52840_ITSYBITSY) #define BOARD_TYPE "NRF52840_ITSYBITSY" #define USE_THIS_SS_PIN 10 // For other boards #elif defined(NRF52840_CIRCUITPLAY) #define BOARD_TYPE "NRF52840_CIRCUITPLAY" #elif defined(NRF52840_CLUE) #define BOARD_TYPE "NRF52840_CLUE" #elif defined(NRF52840_METRO) #define BOARD_TYPE "NRF52840_METRO" #elif defined(NRF52840_PCA10056) #define BOARD_TYPE "NRF52840_PCA10056" #elif defined(NINA_B302_ublox) #define BOARD_TYPE "NINA_B302_ublox" #elif defined(NINA_B112_ublox) #define BOARD_TYPE "NINA_B112_ublox" #elif defined(PARTICLE_XENON) #define BOARD_TYPE "PARTICLE_XENON" #elif defined(ARDUINO_NRF52_ADAFRUIT) #define BOARD_TYPE "ARDUINO_NRF52_ADAFRUIT" #else #define BOARD_TYPE "nRF52 Unknown" #endif #elif ( defined(CORE_TEENSY) ) // Default pin 10 to SS/CS #define USE_THIS_SS_PIN 10 #if defined(__IMXRT1062__) // For Teensy 4.1/4.0 #if defined(ARDUINO_TEENSY41) #define BOARD_TYPE "TEENSY 4.1" // Use true for NativeEthernet Library, false if using other Ethernet libraries #define USE_NATIVE_ETHERNET true #elif defined(ARDUINO_TEENSY40) #define BOARD_TYPE "TEENSY 4.0" #else #define BOARD_TYPE "TEENSY 4.x" #endif #elif defined(__MK66FX1M0__) #define BOARD_TYPE "Teensy 3.6" #elif defined(__MK64FX512__) #define BOARD_TYPE "Teensy 3.5" #elif defined(__MKL26Z64__) #define BOARD_TYPE "Teensy LC" #elif defined(__MK20DX256__) #define BOARD_TYPE "Teensy 3.2" // and Teensy 3.1 (obsolete) #elif defined(__MK20DX128__) #define BOARD_TYPE "Teensy 3.0" #elif defined(__AVR_AT90USB1286__) #error Teensy 2.0++ not supported yet #elif defined(__AVR_ATmega32U4__) #error Teensy 2.0 not supported yet #else // For Other Boards #define BOARD_TYPE "Unknown Teensy Board" #endif #elif ( defined(ESP8266) ) // For ESP8266 #warning Use ESP8266 architecture #include <ESP8266mDNS.h> #define ETHERNET_USE_ESP8266 #define BOARD_TYPE "ESP8266" #elif ( defined(ESP32) ) // For ESP32 #warning Use ESP32 architecture #define ETHERNET_USE_ESP32 #define BOARD_TYPE "ESP32" #define W5500_RST_PORT 21 #elif ETHERNET_USE_RPIPICO // Default pin 5 (in Mbed) or 17 to SS/CS #if defined(ARDUINO_ARCH_MBED) // For RPI Pico using Arduino Mbed RP2040 core // SCK: GPIO2, MOSI: GPIO3, MISO: GPIO4, SS/CS: GPIO5 #define USE_THIS_SS_PIN 5 #if defined(BOARD_NAME) #undef BOARD_NAME #endif #if defined(ARDUINO_RASPBERRY_PI_PICO) #define BOARD_TYPE "MBED RASPBERRY_PI_PICO" #elif defined(ARDUINO_ADAFRUIT_FEATHER_RP2040) #define BOARD_TYPE "MBED DAFRUIT_FEATHER_RP2040" #elif defined(ARDUINO_GENERIC_RP2040) #define BOARD_TYPE "MBED GENERIC_RP2040" #else #define BOARD_TYPE "MBED Unknown RP2040" #endif #else // For RPI Pico using E. Philhower RP2040 core // SCK: GPIO18, MOSI: GPIO19, MISO: GPIO16, SS/CS: GPIO17 #define USE_THIS_SS_PIN 17 #endif #define SS_PIN_DEFAULT USE_THIS_SS_PIN // For RPI Pico #warning Use RPI-Pico RP2040 architecture #else // For Mega // Default pin 10 to SS/CS #define USE_THIS_SS_PIN 10 // Reduce size for Mega #define SENDCONTENT_P_BUFFER_SZ 512 #define BOARD_TYPE "AVR Mega" #endif #ifndef BOARD_NAME #define BOARD_NAME BOARD_TYPE #endif #include <SPI.h> //#define USE_ETHERNET_WRAPPER true #define USE_ETHERNET_WRAPPER false // Use true for ENC28J60 and UIPEthernet library (https://github.com/UIPEthernet/UIPEthernet) // Use false for W5x00 and Ethernetx library (https://www.arduino.cc/en/Reference/Ethernet) //#define USE_UIP_ETHERNET true #define USE_UIP_ETHERNET false // Note: To rename ESP628266 Ethernet lib files to Ethernet_ESP8266.h and Ethernet_ESP8266.cpp // In order to USE_ETHERNET_ESP8266 #if ( !defined(USE_UIP_ETHERNET) || !USE_UIP_ETHERNET ) // To override the default CS/SS pin. Don't use unless you know exactly which pin to use // You can define here or customize for each board at same place with BOARD_TYPE // Check @ defined(SEEED_XIAO_M0) //#define USE_THIS_SS_PIN 22 //21 //5 //4 //2 //15 // Only one if the following to be true #define USE_ETHERNET false #define USE_ETHERNET2 false #define USE_ETHERNET3 false #define USE_ETHERNET_LARGE true #define USE_ETHERNET_ESP8266 false #define USE_ETHERNET_ENC false #define USE_CUSTOM_ETHERNET false #if !USE_ETHERNET_WRAPPER #if ( USE_ETHERNET2 || USE_ETHERNET3 || USE_ETHERNET_LARGE || USE_ETHERNET_ESP8266 || USE_ETHERNET_ENC || USE_NATIVE_ETHERNET || USE_ETHERNET_PORTENTA_H7 ) #ifdef USE_CUSTOM_ETHERNET #undef USE_CUSTOM_ETHERNET #endif #define USE_CUSTOM_ETHERNET false #endif #if USE_ETHERNET_PORTENTA_H7 #include <Portenta_Ethernet.h> #include <Ethernet.h> #warning Using Portenta_Ethernet lib for Portenta_H7. #define SHIELD_TYPE "Ethernet using Portenta_Ethernet Library" #elif USE_NATIVE_ETHERNET #include "NativeEthernet.h" #warning Using NativeEthernet lib for Teensy 4.1. Must also use Teensy Packages Patch or error #define SHIELD_TYPE "Custom Ethernet using Teensy 4.1 NativeEthernet Library" #elif USE_ETHERNET3 #include "Ethernet3.h" #warning Using Ethernet3 lib #define SHIELD_TYPE "W5x00 using Ethernet3 Library" #elif USE_ETHERNET2 #include "Ethernet2.h" #warning Using Ethernet2 lib #define SHIELD_TYPE "W5x00 using Ethernet2 Library" #elif USE_ETHERNET_LARGE #include "EthernetLarge.h" #warning Using EthernetLarge lib #define SHIELD_TYPE "W5x00 using EthernetLarge Library" #elif USE_ETHERNET_ESP8266 #include "Ethernet_ESP8266.h" #warning Using Ethernet_ESP8266 lib #define SHIELD_TYPE "W5x00 using Ethernet_ESP8266 Library" #elif USE_ETHERNET_ENC #include "EthernetENC.h" #warning Using EthernetENC lib #define SHIELD_TYPE "ENC28J60 using EthernetENC Library" #elif USE_CUSTOM_ETHERNET //#include "Ethernet_XYZ.h" #include "EthernetENC.h" #warning Using Custom Ethernet library. You must include a library and initialize. #define SHIELD_TYPE "Custom Ethernet using Ethernet_XYZ Library" #else #ifdef USE_ETHERNET #undef USE_ETHERNET #endif #define USE_ETHERNET true #include "Ethernet.h" #warning Using Ethernet lib #define SHIELD_TYPE "W5x00 using Ethernet Library" #endif // Ethernet_Shield_W5200, EtherCard, EtherSia not supported // Select just 1 of the following #include if uncomment #define USE_CUSTOM_ETHERNET // Otherwise, standard Ethernet library will be used for W5x00 #endif // USE_ETHERNET_WRAPPER #elif USE_UIP_ETHERNET #include "UIPEthernet.h" #warning Using UIPEthernet library #define SHIELD_TYPE "ENC28J60 using UIPEthernet Library" #endif // #if !USE_UIP_ETHERNET #include <EthernetWebServer.h> #ifndef SHIELD_TYPE #define SHIELD_TYPE "Unknown Ethernet shield/library" #endif // Enter a MAC address and IP address for your controller below. #define NUMBER_OF_MAC 20 byte mac[][NUMBER_OF_MAC] = { { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x01 }, { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x02 }, { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x03 }, { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x04 }, { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x05 }, { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x06 }, { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x07 }, { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x08 }, { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x09 }, { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x0A }, { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x0B }, { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x0C }, { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x0D }, { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x0E }, { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x0F }, { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x10 }, { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x11 }, { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x12 }, { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x13 }, { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x14 }, }; // Select the IP address according to your local network IPAddress ip(192, 168, 2, 222); // Google DNS Server IP IPAddress myDns(8, 8, 8, 8); #endif //defines_h 

Start ENC28J60_WM_Config on ESP32 [38] EEPROMsz:1024 [38] CCSum=0x29f2,RCSum=0x29f2 [38] CrCCsum=0,CrRCsum=0 [38] Hdr=ENC28J60,BName=ESP32-ENC28J60-WM [38] Svr=account.duckdns.org,Tok=token [45] Svr1=account.ddns.net,Tok1=token1 [51] Prt=8080,SIP=blank [53] MAC:FE-80-D6-B4-FC-EE ENC28J60_CONTROL_CS =13 SS =5 SPI_MOSI =23 SPI_MISO =19 SPI_SCK =18 [5332] IP:192.168.2.103 [5332] bg:ECon.TryB [5332] ___ __ __ / _ )/ /_ _____ / /__ / _ / / // / _ \/ '_/ /____/_/\_, /_//_/_/\_\  /___/ v0.6.1 on ESP32 [5343] BlynkArduinoClient.connect: Connecting to account.duckdns.org:8080 [6454] Ready (ping: 37ms). [6522] Connected to Blynk Server = account.duckdns.org, Token = token [6522] bg:EBCon Conn2Blynk: server = account.duckdns.org, port = 8080 Token = token, IP = 192.168.2.103 BBBBBBBBBB BBBBBBBBBB BBBBBBBBBB

// Use this to output debug msgs to Serial #define DEBUG_ETHERNET_WEBSERVER_PORT Serial // Use this to disable all output debug msgs // Debug Level from 0 to 4 #define _ETHERNET_WEBSERVER_LOGLEVEL_ 0