adafruit · jepler · Dec 3, 2020 · Oct 25, 2020 · Oct 25, 2020 · Oct 26, 2020
diff --git a/.gitmodules b/.gitmodules
@@ -153,3 +153,6 @@
 [submodule "ports/esp32s2/esp-idf"]
 path = ports/esp32s2/esp-idf
 url = https://github.com/jepler/esp-idf.git
+[submodule "ports/esp32s2/certificates/nina-fw"]
+path = ports/esp32s2/certificates/nina-fw
+url = https://github.com/adafruit/nina-fw.git
diff --git a/conf.py b/conf.py
@@ -172,6 +172,7 @@
  "ports/atmel-samd/tools",
  "ports/cxd56/mkspk",
  "ports/cxd56/spresense-exported-sdk",
+ "ports/esp32s2/certificates",
  "ports/esp32s2/esp-idf",
  "ports/esp32s2/peripherals",
  "ports/litex/hw",

diff --git a/frozen/Adafruit_CircuitPython_Requests b/frozen/Adafruit_CircuitPython_Requests
diff --git a/lib/utils/pyexec.c b/lib/utils/pyexec.c
@@ -101,7 +101,7 @@ STATIC int parse_compile_execute(const void *source, mp_parse_input_kind_t input
  #endif
  }
 
- // If the code was loaded from a file its likely to be running for a while so we'll long
+ // If the code was loaded from a file it's likely to be running for a while so we'll long
  // live it and collect any garbage before running.
  if (input_kind == MP_PARSE_FILE_INPUT) {
  module_fun = make_obj_long_lived(module_fun, 6);
@@ -132,6 +132,10 @@ STATIC int parse_compile_execute(const void *source, mp_parse_input_kind_t input
  if (mp_obj_is_subclass_fast(mp_obj_get_type((mp_obj_t)nlr.ret_val), &mp_type_SystemExit)) {
  // at the moment, the value of SystemExit is unused
  ret = pyexec_system_exit;
+#if CIRCUITPY_ALARM
+ } else if (mp_obj_is_subclass_fast(mp_obj_get_type((mp_obj_t)nlr.ret_val), &mp_type_DeepSleepRequest)) {
+ ret = PYEXEC_DEEP_SLEEP;
+#endif
  } else {
  if ((mp_obj_t) nlr.ret_val != MP_OBJ_FROM_PTR(&MP_STATE_VM(mp_reload_exception))) {
  mp_obj_print_exception(&mp_plat_print, (mp_obj_t)nlr.ret_val);

diff --git a/lib/utils/pyexec.h b/lib/utils/pyexec.h
@@ -49,6 +49,7 @@ extern int pyexec_system_exit;
 #define PYEXEC_FORCED_EXIT (0x100)
 #define PYEXEC_SWITCH_MODE (0x200)
 #define PYEXEC_EXCEPTION (0x400)
+#define PYEXEC_DEEP_SLEEP (0x800)
 
 int pyexec_raw_repl(void);
 int pyexec_friendly_repl(void);

diff --git a/locale/ID.po b/locale/ID.po
@@ -5,7 +5,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-11-24 15:40-0500\n"
+"POT-Creation-Date: 2020-11-27 23:57-0500\n"
 "PO-Revision-Date: 2020-10-10 23:51+0000\n"
 "Last-Translator: oon arfiandwi <oon.arfiandwi@gmail.com>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -504,7 +504,8 @@ msgstr "Panjang buffer harus kelipatan 512"
 msgid "Buffer must be a multiple of 512 bytes"
 msgstr ""
 
-#: shared-bindings/bitbangio/I2C.c shared-bindings/busio/I2C.c
+#: shared-bindings/bitbangio/I2C.c shared-bindings/busdevice/I2CDevice.c
+#: shared-bindings/busio/I2C.c
 msgid "Buffer must be at least length 1"
 msgstr "Penyangga harus memiliki panjang setidaknya 1"
 
@@ -862,6 +863,10 @@ msgstr "Diharapkan sebuah UUID"
 msgid "Expected an Address"
 msgstr "Diharapkan sebuah Alamat"
 
+#: shared-bindings/alarm/__init__.c
+msgid "Expected an alarm"
+msgstr ""
+
 #: shared-module/_pixelbuf/PixelBuf.c
 #, c-format
 msgid "Expected tuple of length %d, got %d"
@@ -1008,6 +1013,10 @@ msgstr "Gagal Inisialisasi I2C"
 msgid "I2SOut not available"
 msgstr ""
 
+#: ports/esp32s2/common-hal/alarm/pin/__init__.c
+msgid "IOs 0, 2 & 4 do not support internal pullup in sleep"
+msgstr ""
+
 #: shared-bindings/aesio/aes.c
 #, c-format
 msgid "IV must be %d bytes long"
@@ -1308,6 +1317,11 @@ msgstr "Tidak ada DAC (Digital Analog Converter) di dalam chip"
 msgid "No DMA channel found"
 msgstr "tidak ada channel DMA ditemukan"
 
+#: shared-module/busdevice/I2CDevice.c
+#, c-format
+msgid "No I2C device at address: %x"
+msgstr ""
+
 #: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c
 #: ports/stm/common-hal/busio/SPI.c
 msgid "No MISO Pin"
@@ -1467,6 +1481,10 @@ msgstr ""
 "Hanya monokrom, 4bpp atau 8bpp yang diindeks, dan 16bpp atau lebih yang "
 "didukung: %d bpp diberikan"
 
+#: ports/esp32s2/common-hal/alarm/__init__.c
+msgid "Only one alarm.time alarm can be set."
+msgstr ""
+
 #: shared-module/displayio/ColorConverter.c
 msgid "Only one color can be transparent at a time"
 msgstr ""
@@ -1526,6 +1544,10 @@ msgstr "Pin harus mendukung interupsi perangkat keras"
 msgid "Pin number already reserved by EXTI"
 msgstr "Nomor pin sudah dipesan oleh EXTI"
 
+#: ports/esp32s2/common-hal/alarm/__init__.c
+msgid "PinAlarm not yet implemented"
+msgstr ""
+
 #: shared-bindings/rgbmatrix/RGBMatrix.c
 #, c-format
 msgid ""
@@ -1592,7 +1614,7 @@ msgstr "Pembalikan RS485 ditentukan saat tidak dalam mode RS485"
 msgid "RTC calibration is not supported on this board"
 msgstr "Kalibrasi RTC tidak didukung pada board ini"
 
-#: shared-bindings/time/__init__.c
+#: shared-bindings/alarm/time/TimeAlarm.c shared-bindings/time/__init__.c
 msgid "RTC is not supported on this board"
 msgstr "RTC tidak didukung di board ini"
 
@@ -1739,6 +1761,10 @@ msgstr "Aliran tidak menemukan metode readinto() atau write()."
 msgid "Supply at least one UART pin"
 msgstr "Berikan setidaknya satu pin UART"
 
+#: shared-bindings/alarm/time/TimeAlarm.c
+msgid "Supply one of monotonic_time or epoch_time"
+msgstr ""
+
 #: shared-bindings/gnss/GNSS.c
 msgid "System entry must be gnss.SatelliteSystem"
 msgstr ""
@@ -1806,6 +1832,10 @@ msgstr ""
 msgid "Tile width must exactly divide bitmap width"
 msgstr ""
 
+#: shared-bindings/alarm/time/TimeAlarm.c
+msgid "Time is in the past."
+msgstr ""
+
 #: ports/nrf/common-hal/_bleio/Adapter.c
 #, c-format
 msgid "Timeout is too long: Maximum timeout length is %d seconds"
@@ -2528,6 +2558,10 @@ msgstr ""
 msgid "end_x should be an int"
 msgstr ""
 
+#: shared-bindings/alarm/time/TimeAlarm.c
+msgid "epoch_time not supported on this board"
+msgstr ""
+
 #: ports/nrf/common-hal/busio/UART.c
 #, c-format
 msgid "error = 0x%08lX"
@@ -2897,6 +2931,10 @@ msgstr ""
 msgid "invalid syntax for number"
 msgstr ""
 
+#: ports/esp32s2/common-hal/alarm/pin/__init__.c
+msgid "io must be rtc io"
+msgstr ""
+
 #: py/objtype.c
 msgid "issubclass() arg 1 must be a class"
 msgstr ""
@@ -3586,6 +3624,10 @@ msgstr ""
 msgid "trapz is defined for 1D arrays of equal length"
 msgstr ""
 
+#: ports/esp32s2/common-hal/alarm/pin/__init__.c
+msgid "trigger level must be 0 or 1"
+msgstr ""
+
 #: extmod/ulab/code/linalg/linalg.c
 msgid "tuple index out of range"
 msgstr ""
@@ -3728,6 +3770,10 @@ msgstr ""
 msgid "vectors must have same lengths"
 msgstr ""
 
+#: ports/esp32s2/common-hal/alarm/pin/__init__.c
+msgid "wakeup conflict"
+msgstr ""
+
 #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
 msgid "watchdog not initialized"
 msgstr ""

diff --git a/locale/circuitpython.pot b/locale/circuitpython.pot
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-11-24 15:40-0500\n"
+"POT-Creation-Date: 2020-11-27 23:57-0500\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -498,7 +498,8 @@ msgstr ""
 msgid "Buffer must be a multiple of 512 bytes"
 msgstr ""
 
-#: shared-bindings/bitbangio/I2C.c shared-bindings/busio/I2C.c
+#: shared-bindings/bitbangio/I2C.c shared-bindings/busdevice/I2CDevice.c
+#: shared-bindings/busio/I2C.c
 msgid "Buffer must be at least length 1"
 msgstr ""
 
@@ -844,6 +845,10 @@ msgstr ""
 msgid "Expected an Address"
 msgstr ""
 
+#: shared-bindings/alarm/__init__.c
+msgid "Expected an alarm"
+msgstr ""
+
 #: shared-module/_pixelbuf/PixelBuf.c
 #, c-format
 msgid "Expected tuple of length %d, got %d"
@@ -989,6 +994,10 @@ msgstr ""
 msgid "I2SOut not available"
 msgstr ""
 
+#: ports/esp32s2/common-hal/alarm/pin/__init__.c
+msgid "IOs 0, 2 & 4 do not support internal pullup in sleep"
+msgstr ""
+
 #: shared-bindings/aesio/aes.c
 #, c-format
 msgid "IV must be %d bytes long"
@@ -1287,6 +1296,11 @@ msgstr ""
 msgid "No DMA channel found"
 msgstr ""
 
+#: shared-module/busdevice/I2CDevice.c
+#, c-format
+msgid "No I2C device at address: %x"
+msgstr ""
+
 #: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c
 #: ports/stm/common-hal/busio/SPI.c
 msgid "No MISO Pin"
@@ -1440,6 +1454,10 @@ msgid ""
 "%d bpp given"
 msgstr ""
 
+#: ports/esp32s2/common-hal/alarm/__init__.c
+msgid "Only one alarm.time alarm can be set."
+msgstr ""
+
 #: shared-module/displayio/ColorConverter.c
 msgid "Only one color can be transparent at a time"
 msgstr ""
@@ -1497,6 +1515,10 @@ msgstr ""
 msgid "Pin number already reserved by EXTI"
 msgstr ""
 
+#: ports/esp32s2/common-hal/alarm/__init__.c
+msgid "PinAlarm not yet implemented"
+msgstr ""
+
 #: shared-bindings/rgbmatrix/RGBMatrix.c
 #, c-format
 msgid ""
@@ -1558,7 +1580,7 @@ msgstr ""
 msgid "RTC calibration is not supported on this board"
 msgstr ""
 
-#: shared-bindings/time/__init__.c
+#: shared-bindings/alarm/time/TimeAlarm.c shared-bindings/time/__init__.c
 msgid "RTC is not supported on this board"
 msgstr ""
 
@@ -1704,6 +1726,10 @@ msgstr ""
 msgid "Supply at least one UART pin"
 msgstr ""
 
+#: shared-bindings/alarm/time/TimeAlarm.c
+msgid "Supply one of monotonic_time or epoch_time"
+msgstr ""
+
 #: shared-bindings/gnss/GNSS.c
 msgid "System entry must be gnss.SatelliteSystem"
 msgstr ""
@@ -1767,6 +1793,10 @@ msgstr ""
 msgid "Tile width must exactly divide bitmap width"
 msgstr ""
 
+#: shared-bindings/alarm/time/TimeAlarm.c
+msgid "Time is in the past."
+msgstr ""
+
 #: ports/nrf/common-hal/_bleio/Adapter.c
 #, c-format
 msgid "Timeout is too long: Maximum timeout length is %d seconds"
@@ -2481,6 +2511,10 @@ msgstr ""
 msgid "end_x should be an int"
 msgstr ""
 
+#: shared-bindings/alarm/time/TimeAlarm.c
+msgid "epoch_time not supported on this board"
+msgstr ""
+
 #: ports/nrf/common-hal/busio/UART.c
 #, c-format
 msgid "error = 0x%08lX"
@@ -2850,6 +2884,10 @@ msgstr ""
 msgid "invalid syntax for number"
 msgstr ""
 
+#: ports/esp32s2/common-hal/alarm/pin/__init__.c
+msgid "io must be rtc io"
+msgstr ""
+
 #: py/objtype.c
 msgid "issubclass() arg 1 must be a class"
 msgstr ""
@@ -3537,6 +3575,10 @@ msgstr ""
 msgid "trapz is defined for 1D arrays of equal length"
 msgstr ""
 
+#: ports/esp32s2/common-hal/alarm/pin/__init__.c
+msgid "trigger level must be 0 or 1"
+msgstr ""
+
 #: extmod/ulab/code/linalg/linalg.c
 msgid "tuple index out of range"
 msgstr ""
@@ -3679,6 +3721,10 @@ msgstr ""
 msgid "vectors must have same lengths"
 msgstr ""
 
+#: ports/esp32s2/common-hal/alarm/pin/__init__.c
+msgid "wakeup conflict"
+msgstr ""
+
 #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
 msgid "watchdog not initialized"
 msgstr ""
+22 −4		adafruit_requests.py
+9 −4		tests/legacy_test.py
+31 −0		tests/reuse_test.py