summaryrefslogtreecommitdiff
path: root/units
diff options
Diffstat (limited to 'units')
-rw-r--r--units/disk/encryption.pxu12
1 files changed, 7 insertions, 5 deletions
diff --git a/units/disk/encryption.pxu b/units/disk/encryption.pxu
index b805a37e..d4c5df8c 100644
--- a/units/disk/encryption.pxu
+++ b/units/disk/encryption.pxu
@@ -37,12 +37,14 @@ _purpose:
BIOS), the device won't be able to get the master key and decrypt its data
partition.
_steps:
+ NOTE!!!! YOU'LL HAVE TO RE-INSTALL THE IMAGE AFTER THIS TEST
1. Install the image and make sure it boots and you can log in.
- 2. Turn the device off and upgrade/downgrade the BIOS or modify Secure Boot state
- 3. Make sure the BIOS is set up properly (e.g. TPM enabled, UEFI boot mode)
- 4. Start the device
+ 2. Make sure the BIOS is set up properly (e.g. TPM enabled, UEFI boot mode)
+ 3. Based on your project's situation, choose one of the following methods to clean TPM:
+ a. Turn the device off and upgrade/downgrade the BIOS or modify Secure Boot state
+ b. Clean TPM via BIOS menu
+ c. Install checkbox, execute "checkbox-[project name].checkbox-cli run com.canonical.certification::tpm2.0_3.0.4/tpm2_takeownership"
+ 4. Start or reboot the device
_verification:
Mark this test as "Passed" if the device cannot boot anymore.
- Note: You must flash the BIOS back to the latest version, re-enable Secure Boot
- and re-install the image afterwards.