provider:checkbox use 'Commence the test' for test instructions

Use a more generic phrase 'Commence the test' to replace 'Click test button' in the test instructions

10 files changed, 54 insertions, 52 deletions

diff --git a/jobs/audio.txt.in b/jobs/audio.txt.in
index 81f3837..11b05e8 100644
--- a/jobs/audio.txt.in
+++ b/jobs/audio.txt.in
@@ -32,7 +32,7 @@ _description:
 1. Make sure that no external speakers or headphones are connected
 When testing a desktop, you can skip this test if there is no
 internal speaker, we will test the external output later
- 2. Click the Test button to play a brief tone on your audio device
+ 2. Commence the test to play a brief tone on your audio device
 VERIFICATION:
 Did you hear a tone?
 
@@ -64,7 +64,7 @@ command:
 HDMI audio interface verification
 STEPS:
 1. Plug an external HDMI device with sound (Use only one HDMI/DisplayPort/Thunderbolt interface at a time for this test)
- 2. Click the Test button
+ 2. Commence the test
 VERIFICATION:
 Did you hear the sound from the HDMI device?
 EOF
@@ -97,7 +97,7 @@ command:
 DisplayPort audio interface verification
 STEPS:
 1. Plug an external DisplayPort device with sound (Use only one HDMI/DisplayPort/Thunderbolt interface at a time for this test)
- 2. Click the Test button
+ 2. Commence the test
 VERIFICATION:
 Did you hear the sound from the DisplayPort device?
 EOF
@@ -131,7 +131,7 @@ command:
 Thunderbolt audio interface verification
 STEPS:
 1. Plug an external Thunderbolt device with sound (Use only one HDMI/DisplayPort/Thunderbolt interface at a time for this test)
- 2. Click the Test button
+ 2. Commence the test
 VERIFICATION:
 Did you hear the sound from the Thunderbolt device?
 EOF
@@ -158,7 +158,7 @@ _description:
 This test will check that headphones connector works correctly
 STEPS:
 1. Connect a pair of headphones to your audio device
- 2. Click the Test button to play a sound to your audio device
+ 2. Commence the test to play a sound to your audio device
 VERIFICATION:
 Did you hear a sound through the headphones and did the sound play without any distortion, clicks or other strange noises from your headphones?
 
@@ -287,7 +287,7 @@ _description:
 PURPOSE:
 Check that the various audio channels are working properly
 STEPS:
- 1. Click the Test button
+ 1. Commence the test
 VERIFICATION:
 You should clearly hear a voice from the different audio channels
 
@@ -316,7 +316,7 @@ _description:
 Check that external line out connection works correctly
 STEPS:
 1. Insert cable to speakers (with built-in amplifiers) on the line out port
- 2. Open system sound preferences, 'Output' tab, select 'Line-out' on the connector list. Click the Test button
+ 2. Open system sound preferences, 'Output' tab, select 'Line-out' on the connector list. Commence the test
 3. On the system sound preferences, select 'Internal Audio' on the device list and click 'Test Speakers' to check left and right channel
 VERIFICATION:
 1. Do you hear a sound in the speakers? The internal speakers should *not* be muted automatically
@@ -343,7 +343,7 @@ _description:
 Check that external line in connection works correctly
 STEPS:
 1. Use a cable to connect the line in port to an external line out source.
- 2. Open system sound preferences, 'Input' tab, select 'Line-in' on the connector list. Click the Test button
+ 2. Open system sound preferences, 'Input' tab, select 'Line-in' on the connector list. Commence the test
 3. After a few seconds, your recording will be played back to you.
 VERIFICATION:
 Did you hear your recording?
@@ -413,7 +413,7 @@ _description:
 Check that balance control works correctly on internal speakers
 STEPS:
 1. Check that moving the balance slider from left to right works smoothly
- 2. Click the Test button to play an audio tone for 10 seconds.
+ 2. Commence the test to play an audio tone for 10 seconds.
 3. Move the balance slider from left to right and back.
 4. Check that actual speaker audio balance follows your setting.
 VERIFICATION:
@@ -441,7 +441,7 @@ _description:
 Check that balance control works correctly on external headphone
 STEPS:
 1. Check that moving the balance slider from left to right works smoothly
- 2. Click the Test button to play an audio tone for 10 seconds.
+ 2. Commence the test to play an audio tone for 10 seconds.
 3. Move the balance slider from left to right and back.
 4. Check that actual headphone audio balance follows your setting.
 VERIFICATION:
@@ -482,7 +482,7 @@ _description:
 1. Make sure that no external speakers or headphones are connected
 When testing a desktop, you can skip this test if there is no
 internal speaker, we will test the external output later
- 2. Click the Test button to play a brief tone on your audio device
+ 2. Commence the test to play a brief tone on your audio device
 VERIFICATION:
 Did you hear a tone?
 
diff --git a/jobs/bluetooth.txt.in b/jobs/bluetooth.txt.in
index 619767a..58d967c 100644
--- a/jobs/bluetooth.txt.in
+++ b/jobs/bluetooth.txt.in
@@ -122,7 +122,7 @@ _description:
 3. Select 'Setup new device'
 4. Look for the device in the list and select it
 5. For mice, perform actions such as moving the pointer, right and left button clicks and double clicks
- 6. For keyboards, click the Test button to lauch a small tool. Enter some text into the tool and close it.
+ 6. For keyboards, commence the test to lauch a small tool. Enter some text into the tool and close it.
 VERIFICATION:
 Did the device work as expected?
 
diff --git a/jobs/keys.txt.in b/jobs/keys.txt.in
index e422da1..2528ebb 100644
--- a/jobs/keys.txt.in
+++ b/jobs/keys.txt.in
@@ -9,7 +9,7 @@ _description:
 PURPOSE:
 This test will test the screen lock key
 STEPS:
- 1. Press the Test button to begin this test. If there is no such key, please skip this test.
+ 1. Commence the test. If there is no such key, please skip this test.
 2. Press the lock screen button on the keyboard in 30 seconds.
 3. If the screen is locked, move the mouse or press any key to activate the prompt.
 4. Input the password to unlock the screen.
diff --git a/jobs/mediacard.txt.in b/jobs/mediacard.txt.in
index 92042a9..27839dc 100644
--- a/jobs/mediacard.txt.in
+++ b/jobs/mediacard.txt.in
@@ -391,7 +391,7 @@ _description:
 This test will check your Media Card data transfer performance.
 STEPS:
 1. Insert SD card into the reader slot on this computer.
- 2. Click the test button to perform the test.
+ 2. Commence the test.
 VERIFICATION:
 Did the results of the test match the expected performance of the inserted device?
 
@@ -407,7 +407,7 @@ _description:
 This test will check your Media Card data transfer performance.
 STEPS:
 1. Insert SDHC card into the reader slot on this computer.
- 2. Click the test button to perform the test.
+ 2. Commence the test.
 VERIFICATION:
 Did the results of the test match the expected performance of the inserted device?
 
@@ -423,7 +423,7 @@ _description:
 This test will check your Media Card data transfer performance.
 STEPS:
 1. Insert MMC card into the reader slot on this computer.
- 2. Click the test button to perform the test.
+ 2. Commence the test.
 VERIFICATION:
 Did the results of the test match the expected performance of the inserted device?
 
@@ -439,7 +439,7 @@ _description:
 This test will check your Media Card data transfer performance.
 STEPS:
 1. Insert CF card into the reader slot on this computer.
- 2. Click the test button to perform the test.
+ 2. Commence the test.
 VERIFICATION:
 Did the results of the test match the expected performance of the inserted device?
 
@@ -455,7 +455,7 @@ _description:
 This test will check your Media Card data transfer performance.
 STEPS:
 1. Insert SDXC card into the reader slot on this computer.
- 2. Click the test button to perform the test.
+ 2. Commence the test.
 VERIFICATION:
 Did the results of the test match the expected performance of the inserted device?
 
@@ -471,7 +471,7 @@ _description:
 This test will check your Media Card data transfer performance.
 STEPS:
 1. Insert MS card into the reader slot on this computer.
- 2. Click the test button to perform the test.
+ 2. Commence the test.
 VERIFICATION:
 Did the results of the test match the expected performance of the inserted device?
 
@@ -487,7 +487,7 @@ _description:
 This test will check your Media Card data transfer performance.
 STEPS:
 1. Insert MSP card into the reader slot on this computer.
- 2. Click the test button to perform the test.
+ 2. Commence the test.
 VERIFICATION:
 Did the results of the test match the expected performance of the inserted device?
 
@@ -503,7 +503,7 @@ _description:
 This test will check your Media Card data transfer performance.
 STEPS:
 1. Insert XD card into the reader slot on this computer.
- 2. Click the test button to perform the test.
+ 2. Commence the test.
 VERIFICATION:
 Did the results of the test match the expected performance of the inserted device?
 
diff --git a/jobs/panel_clock_test.txt.in b/jobs/panel_clock_test.txt.in
index 4c903cd..206c8b6 100644
--- a/jobs/panel_clock_test.txt.in
+++ b/jobs/panel_clock_test.txt.in
@@ -19,7 +19,7 @@ _description:
 PURPOSE:
 This test will verify that the desktop clock synchronizes with the system clock.
 STEPS:
- 1. Click the "Test" button and verify the clock moves ahead by 1 hour.
+ 1. Commence the test and verify the clock moves ahead by 1 hour.
 Note: It may take a minute or so for the clock to refresh
 2. Right click on the clock, then click on "Time & Date Settings..."
 3. Ensure that your clock application is set to manual.
diff --git a/jobs/suspend.txt.in b/jobs/suspend.txt.in
index 54f01c6..0e45158 100644
--- a/jobs/suspend.txt.in
+++ b/jobs/suspend.txt.in
@@ -565,7 +565,7 @@ _description:
 This test will check that headphones connector works correctly after suspend
 STEPS:
 1. Connect a pair of headphones to your audio device
- 2. Click the Test button to play a sound to your audio device
+ 2. Commence the test to play a sound to your audio device
 VERIFICATION:
 Did you hear a sound through the headphones and did the sound play without any distortion, clicks or other strange noises from your headphones?
 
@@ -1055,7 +1055,7 @@ _description:
 2. Change the settings to only accept connections on the B and G wireless bands
 3. Make sure the SSID is set to ROUTER_SSID
 4. Change the security settings to use WPA2 and ensure the PSK matches that set in ROUTER_PSK
- 5. Click the 'Test' button to create a connection to the router and test the connection
+ 5. Commence the test to create a connection to the router and test the connection
 VERIFICATION:
 Verification is automated, do not change the automatically selected result.
 
@@ -1087,7 +1087,7 @@ _description:
 2. Change the settings to only accept connections on the B and G wireless bands
 3. Make sure the SSID is set to ROUTER_SSID
 4. Change the security settings to use no security
- 5. Click the 'Test' button to create a connection to the router and test the connection
+ 5. Commence the test to create a connection to the router and test the connection
 VERIFICATION:
 Verification is automated, do not change the automatically selected result.
 
@@ -1119,7 +1119,7 @@ _description:
 2. Change the settings to only accept connections on the N wireless band
 3. Make sure the SSID is set to ROUTER_SSID
 4. Change the security settings to use WPA2 and ensure the PSK matches that set in ROUTER_PSK
- 5. Click the 'Test' button to create a connection to the router and test the connection
+ 5. Commence the test to create a connection to the router and test the connection
 VERIFICATION:
 Verification is automated, do not change the automatically selected result.
 
@@ -1151,7 +1151,7 @@ _description:
 2. Change the settings to only accept connections on the N wireless band
 3. Make sure the SSID is set to ROUTER_SSID
 4. Change the security settings to use no security
- 5. Click the 'Test' button to create a connection to the router and test the connection
+ 5. Commence the test to create a connection to the router and test the connection
 VERIFICATION:
 Verification is automated, do not change the automatically selected result.
 
@@ -1183,7 +1183,7 @@ _description:
 2. Change the settings to only accept connections on the 802.11ac protocol.
 3. Make sure the SSID is set to ROUTER_SSID
 4. Change the security settings to use WPA2 and ensure the PSK matches that set in ROUTER_PSK
- 5. Click the 'Test' button to create a connection to the router and test the connection
+ 5. Commence the test to create a connection to the router and test the connection
 VERIFICATION:
 Verification is automated, do not change the automatically selected result.
 
@@ -1215,7 +1215,7 @@ _description:
 2. Change the settings to only accept connections on the 802.11ac protocol.
 3. Make sure the SSID is set to ROUTER_SSID
 4. Change the security settings to use no security
- 5. Click the 'Test' button to create a connection to the router and test the connection
+ 5. Commence the test to create a connection to the router and test the connection
 VERIFICATION:
 Verification is automated, do not change the automatically selected result.
 
diff --git a/jobs/touchscreen.txt.in b/jobs/touchscreen.txt.in
index 53fd582..e6d8b9d 100644
--- a/jobs/touchscreen.txt.in
+++ b/jobs/touchscreen.txt.in
@@ -69,7 +69,7 @@ _description:
 PURPOSE:
 Check touchscreen pinch gesture for zoom
 STEPS:
- 1. Press the Test button
+ 1. Commence the test
 2. Using 2 fingers, resize the blue square until it turns green, then release it.
 VERIFICATION:
 Did the blue square change size following the gesture?
@@ -85,7 +85,7 @@ _description:
 PURPOSE:
 Check touchscreen pinch gesture for rotate
 STEPS:
- 1. Press the Test button
+ 1. Commence the test
 2. Using 2 fingers, rotate the blue square until it turns green, then release it.
 VERIFICATION:
 Did the blue square rotate following the gesture?
@@ -126,8 +126,9 @@ _description:
 PURPOSE:
 Validate that 3-touch tap is operating as expected
 STEPS:
- 1. Tap the screen with 3 fingers simultaneously.
- 2. Once 3 fingers are on the screen you should see the indicator they are recognized.
+ 1. Commence the test
+ 2. Tap the screen within the test area with 3 fingers simultaneously.
+ 3. Once 3 fingers are on the screen you should see the indicator they are recognized.
 VERIFICATION:
 Did you see the green circles around the three fingers?
 command:
@@ -147,8 +148,9 @@ _description:
 PURPOSE:
 Validate that 4-touch tap is operating as expected
 STEPS:
- 1. Tap the screen with 4 fingers simultaneously.
- 2. Once 4 fingers are on the screen you should see the indicator they are recognized.
+ 1. Commence the test
+ 2. Tap the screen within the test area with 4 fingers simultaneously.
+ 3. Once 4 fingers are on the screen you should see the indicator they are recognized.
 VERIFICATION:
 Did you see the green circles around the four fingers?
 command:
diff --git a/jobs/usb.txt.in b/jobs/usb.txt.in
index 99ea5af..7a60bfa 100644
--- a/jobs/usb.txt.in
+++ b/jobs/usb.txt.in
@@ -34,7 +34,7 @@ _description:
 STEPS:
 1. Enable either a USB mouse or keyboard
 2. For mice, perform actions such as moving the pointer, right and left button clicks and double clicks
- 3. For keyboards, click the Test button to lauch a small tool. Type some text and close the tool.
+ 3. For keyboards, commence the test to lauch a small tool. Type some text and close the tool.
 VERIFICATION:
 Did the device work as expected?
 
diff --git a/jobs/user_apps.txt.in b/jobs/user_apps.txt.in
index 39edef4..7bd47fe 100644
--- a/jobs/user_apps.txt.in
+++ b/jobs/user_apps.txt.in
@@ -383,7 +383,7 @@ _description:
 PURPOSE:
 This test will check that Evolution works.
 STEPS:
- 1. Click the "Test" button to launch Evolution.
+ 1. Commence the test to launch Evolution.
 2. Configure it to connect to a POP3 account.
 VERIFICATION:
 Were you able to receive and read e-mail correctly?
@@ -397,7 +397,7 @@ _description:
 PURPOSE:
 This test will check that Evolution works.
 STEPS:
- 1. Click the "Test" button to launch Evolution.
+ 1. Commence the test to launch Evolution.
 2. Configure it to connect to a IMAP account.
 VERIFICATION:
 Were you able to receive and read e-mail correctly?
@@ -411,7 +411,7 @@ _description:
 PURPOSE:
 This test will check that Evolution works.
 STEPS:
- 1. Click the "Test" button to launch Evolution.
+ 1. Commence the test to launch Evolution.
 2. Configure it to connect to a SMTP account.
 VERIFICATION:
 Were you able to send e-mail without errors?
@@ -425,7 +425,7 @@ _description:
 PURPOSE:
 This test checks that gcalctool (Calculator) works.
 STEPS:
- Click the "Test" button to open the calculator.
+ Commence the test to open the calculator.
 VERIFICATION:
 Did it launch correctly?
 
@@ -439,7 +439,7 @@ _description:
 PURPOSE:
 This test checks that gcalctool (Calculator) works.
 STEPS:
- Click the "Test" button to open the calculator and perform:
+ Commence the test to open the calculator and perform:
 1. Simple math functions (+,-,/,*)
 2. Nested math functions ((,))
 3. Fractional math
@@ -457,7 +457,7 @@ _description:
 PURPOSE:
 This test checks that gcalctool (Calculator) works.
 STEPS:
- Click the "Test" button to open the calculator and perform:
+ Commence the test to open the calculator and perform:
 1. Memory set
 2. Memory reset
 3. Memory last clear
@@ -475,7 +475,7 @@ _description:
 PURPOSE:
 This test checks that gcalctool (Calculator) works.
 STEPS:
- Click the "Test" button to open the calculator and perform:
+ Commence the test to open the calculator and perform:
 1. Cut
 2. Copy
 3. Paste
@@ -491,7 +491,7 @@ _description:
 PURPOSE:
 This test checks that gedit works.
 STEPS:
- 1. Click the "Test" button to open gedit.
+ 1. Commence the test to open gedit.
 2. Enter some text and save the file (make a note of the file name you use), then close gedit.
 VERIFICATION:
 Did this perform as expected?
@@ -506,7 +506,7 @@ _description:
 PURPOSE:
 This test checks that gedit works.
 STEPS:
- 1. Click the "Test" button to open gedit, and re-open the file you created previously.
+ 1. Commence the test to open gedit, and re-open the file you created previously.
 2. Edit then save the file, then close gedit.
 VERIFICATION:
 Did this perform as expected?
@@ -520,7 +520,7 @@ _description:
 PURPOSE:
 This test will check that Gnome Terminal works.
 STEPS:
- 1. Click the "Test" button to open Terminal.
+ 1. Commence the test to open Terminal.
 2. Type 'ls' and press enter. You should see a list of files and folder in your home directory.
 3. Close the terminal window.
 VERIFICATION:
diff --git a/jobs/wireless.txt.in b/jobs/wireless.txt.in
index 1a02303..c08cd1e 100644
--- a/jobs/wireless.txt.in
+++ b/jobs/wireless.txt.in
@@ -209,7 +209,7 @@ _description:
 2. Change the settings to only accept connections on the B and G wireless bands
 3. Make sure the SSID is set to the contents of the ROUTER_SSID environment variable
 4. Change the security settings to use WPA2 and ensure the PSK matches what is set in the ROUTER_PSK environment variable
- 5. Click the 'Test' button to create a connection to the router and test the connection
+ 5. Commence the test to create a connection to the router and test the connection
 VERIFICATION:
 Verification is automated, do not change the automatically selected result.
 
@@ -240,7 +240,7 @@ _description:
 2. Change the settings to only accept connections on the B and G wireless bands
 3. Make sure the SSID is set to the contents of the ROUTER_SSID environment variable
 4. Change the security settings to use no security
- 5. Click the 'Test' button to create a connection to the router and test the connection
+ 5. Commence the test to create a connection to the router and test the connection
 VERIFICATION:
 Verification is automated, do not change the automatically selected result.
 
@@ -272,7 +272,7 @@ _description:
 2. Change the settings to only accept connections on the N wireless band
 3. Make sure the SSID is set to the contents of the ROUTER_SSID environment variable
 4. Change the security settings to use WPA2 and ensure the PSK matches what is set in the ROUTER_PSK environment variable
- 5. Click the 'Test' button to create a connection to the router and test the connection
+ 5. Commence the test to create a connection to the router and test the connection
 VERIFICATION:
 Verification is automated, do not change the automatically selected result.
 
@@ -304,7 +304,7 @@ _description:
 2. Change the settings to only accept connections on the N wireless band
 3. Make sure the SSID is set to the contents of the ROUTER_SSID environment variable
 4. Change the security settings to use no security
- 5. Click the 'Test' button to create a connection to the router and test the connection
+ 5. Commence the test to create a connection to the router and test the connection
 VERIFICATION:
 Verification is automated, do not change the automatically selected result.
 
@@ -336,7 +336,7 @@ _description:
 2. Change the settings to only accept connections with the 802.11ac protocol.
 3. Make sure the SSID is set to the contents of the ROUTER_SSID environment variable
 4. Change the security settings to use WPA2 and ensure the PSK matches what is set in the ROUTER_PSK environment variable
- 5. Click the 'Test' button to create a connection to the router and test the connection
+ 5. Commence the test to create a connection to the router and test the connection
 VERIFICATION:
 Verification is automated, do not change the automatically selected result.
 
@@ -368,7 +368,7 @@ _description:
 2. Change the settings to only accept connections with the 802.11ac protocol.
 3. Make sure the SSID is set to the contents of the ROUTER_SSID environment variable
 4. Change the security settings to use no security
- 5. Click the 'Test' button to create a connection to the router and test the connection
+ 5. Commence the test to create a connection to the router and test the connection
 VERIFICATION:
 Verification is automated, do not change the automatically selected result.