Move all jobs definition files into pxu units

1 files changed, 693 insertions, 0 deletions

diff --git a/units/wireless/jobs.pxu b/units/wireless/jobs.pxu
new file mode 100644
index 0000000..cf13a3c
--- /dev/null
+++ b/units/wireless/jobs.pxu
@@ -0,0 +1,693 @@
+plugin: shell
+category_id: com.canonical.plainbox::wireless
+id: wireless/wireless_scanning
+requires:
+ package.name == 'network-manager'
+ device.category == 'WIRELESS'
+command:
+ rfkill unblock wlan wifi
+ if rfkill list wlan wifi | grep -q 'Hard blocked: yes'; then
+ echo "Hard block is applied to WiFi device. Please remove and retest."
+ exit 1
+ fi
+ wireless_networks=`(nmcli -f SSID dev wifi list 2>/dev/null || nmcli -f SSID dev wifi)`
+ if [ `echo "$wireless_networks" | wc -l` -gt 1 ]; then
+ echo "Wireless networks discovered: "
+ echo "$wireless_networks"
+ exit 0
+ fi
+ echo "No wireless networks discovered."
+ exit 1
+estimated_duration: 0.645
+_description: Wireless scanning test. It scans and reports on discovered APs.
+
+plugin: shell
+category_id: com.canonical.plainbox::wireless
+id: wireless/info_automated
+requires:
+ package.name == 'network-manager'
+ device.category == 'WIRELESS'
+command: udev_resource -f WIRELESS | awk "/interface: / { print \$2 }" | xargs -n 1 network_info
+estimated_duration: 1.2
+_description:
+ This is an automated test to gather some info on the current state of your wireless devices. If no devices are found, the test will exit with an error.
+
+plugin: user-interact-verify
+category_id: com.canonical.plainbox::wireless
+id: wireless/wireless_connection
+command: network_check
+estimated_duration: 120.0
+requires: device.category == 'WIRELESS'
+_description:
+ PURPOSE:
+ This test will check your wireless connection.
+ STEPS:
+ 1. Click on the Network icon in the panel.
+ 2. Select a network below the 'Wireless networks' section.
+ 3. Click "Test" to verify that it's possible to establish an HTTP connection.
+ VERIFICATION:
+ Did a notification show and was the connection correctly established?
+
+plugin: shell
+category_id: com.canonical.plainbox::wireless
+id: wireless/wireless_connection_wpa_bg
+requires:
+ device.category == 'WIRELESS'
+ environment.ROUTERS == 'multiple'
+user: root
+environ: WPA_BG_SSID WPA_BG_PSK
+command:
+ trap "nmcli con delete id $WPA_BG_SSID" EXIT
+ if create_connection wifi $WPA_BG_SSID --security=wpa --key=$WPA_BG_PSK; then
+ connect_wireless # lp:1471663
+ INTERFACE=`nmcli dev status | awk '/802-11-wireless|wifi/ {print $1}'`
+ iw dev $INTERFACE link
+ gateway_ping_test --interface=$INTERFACE
+ STATUS=$?
+ # We reconnect the Ethernet connection if any (lp:1471663)
+ WIRED=$(nmcli -f UUID,TYPE c | grep -oP ".*(?=\s+.*ethernet)")
+ if [[ ! -z $WIRED ]]; then
+ nmcli c up uuid $WIRED
+ fi
+ exit $STATUS
+ else
+ exit 1
+ fi
+estimated_duration: 30.0
+_description:
+ Tests that the systems wireless hardware can connect to a router using WPA
+ security and the 802.11b/g protocols.
+
+plugin: shell
+category_id: com.canonical.plainbox::wireless
+id: wireless/wireless_connection_open_bg
+requires:
+ device.category == 'WIRELESS'
+ environment.ROUTERS == 'multiple'
+user: root
+environ: OPEN_BG_SSID
+command:
+ trap "nmcli con delete id $OPEN_BG_SSID" EXIT
+ if create_connection wifi $OPEN_BG_SSID; then
+ connect_wireless # lp:1471663
+ INTERFACE=`nmcli dev status | awk '/802-11-wireless|wifi/ {print $1}'`
+ iw dev $INTERFACE link
+ gateway_ping_test --interface=$INTERFACE
+ STATUS=$?
+ # We reconnect the Ethernet connection if any (lp:1471663)
+ WIRED=$(nmcli -f UUID,TYPE c | grep -oP ".*(?=\s+.*ethernet)")
+ if [[ ! -z $WIRED ]]; then
+ nmcli c up uuid $WIRED
+ fi
+ exit $STATUS
+ else
+ exit 1
+ fi
+estimated_duration: 30.0
+_description:
+ Tests that the systems wireless hardware can connect to a router using no
+ security and the 802.11b/g protocols.
+
+plugin: shell
+category_id: com.canonical.plainbox::wireless
+id: wireless/wireless_connection_wpa_n
+requires:
+ device.category == 'WIRELESS'
+ environment.ROUTERS == 'multiple'
+user: root
+environ: WPA_N_SSID WPA_N_PSK
+command:
+ trap "nmcli con delete id $WPA_N_SSID" EXIT
+ if create_connection wifi $WPA_N_SSID --security=wpa --key=$WPA_N_PSK; then
+ connect_wireless # lp:1471663
+ INTERFACE=`nmcli dev status | awk '/802-11-wireless|wifi/ {print $1}'`
+ iw dev $INTERFACE link
+ gateway_ping_test --interface=$INTERFACE
+ STATUS=$?
+ # We reconnect the Ethernet connection if any (lp:1471663)
+ WIRED=$(nmcli -f UUID,TYPE c | grep -oP ".*(?=\s+.*ethernet)")
+ if [[ ! -z $WIRED ]]; then
+ nmcli c up uuid $WIRED
+ fi
+ exit $STATUS
+ else
+ exit 1
+ fi
+estimated_duration: 30.0
+_description:
+ Tests that the systems wireless hardware can connect to a router using WPA
+ security and the 802.11n protocol.
+
+plugin: shell
+category_id: com.canonical.plainbox::wireless
+id: wireless/wireless_connection_open_n
+requires:
+ device.category == 'WIRELESS'
+ environment.ROUTERS == 'multiple'
+user: root
+environ: OPEN_N_SSID
+command:
+ trap "nmcli con delete id $OPEN_N_SSID" EXIT
+ if create_connection wifi $OPEN_N_SSID; then
+ connect_wireless # lp:1471663
+ INTERFACE=`nmcli dev status | awk '/802-11-wireless|wifi/ {print $1}'`
+ iw dev $INTERFACE link
+ gateway_ping_test --interface=$INTERFACE
+ STATUS=$?
+ # We reconnect the Ethernet connection if any (lp:1471663)
+ WIRED=$(nmcli -f UUID,TYPE c | grep -oP ".*(?=\s+.*ethernet)")
+ if [[ ! -z $WIRED ]]; then
+ nmcli c up uuid $WIRED
+ fi
+ exit $STATUS
+ else
+ exit 1
+ fi
+estimated_duration: 30.0
+_description:
+ Tests that the systems wireless hardware can connect to a router using no
+ security and the 802.11n protocol.
+
+plugin: shell
+category_id: com.canonical.plainbox::wireless
+id: wireless/wireless_connection_wpa_ac
+requires:
+ device.category == 'WIRELESS'
+ environment.ROUTERS == 'multiple'
+ IEEE_80211.ac == 'supported'
+user: root
+environ: WPA_AC_SSID WPA_AC_PSK
+command:
+ trap "nmcli con delete id $WPA_AC_SSID" EXIT
+ if create_connection wifi $WPA_AC_SSID --security=wpa --key=$WPA_AC_PSK; then
+ connect_wireless # lp:1471663
+ INTERFACE=`nmcli dev status | awk '/802-11-wireless|wifi/ {print $1}'`
+ iw dev $INTERFACE link
+ gateway_ping_test --interface=$INTERFACE
+ STATUS=$?
+ # We reconnect the Ethernet connection if any (lp:1471663)
+ WIRED=$(nmcli -f UUID,TYPE c | grep -oP ".*(?=\s+.*ethernet)")
+ if [[ ! -z $WIRED ]]; then
+ nmcli c up uuid $WIRED
+ fi
+ exit $STATUS
+ else
+ exit 1
+ fi
+estimated_duration: 30.0
+_description:
+ Tests that the systems wireless hardware can connect to a router using WPA
+ security and the 802.11ac protocol.
+
+plugin: shell
+category_id: com.canonical.plainbox::wireless
+id: wireless/wireless_connection_open_ac
+requires:
+ device.category == 'WIRELESS'
+ environment.ROUTERS == 'multiple'
+ IEEE_80211.ac == 'supported'
+user: root
+environ: OPEN_AC_SSID
+command:
+ trap "nmcli con delete id $OPEN_AC_SSID" EXIT
+ if create_connection wifi $OPEN_AC_SSID; then
+ connect_wireless # lp:1471663
+ INTERFACE=`nmcli dev status | awk '/802-11-wireless|wifi/ {print $1}'`
+ iw dev $INTERFACE link
+ gateway_ping_test --interface=$INTERFACE
+ STATUS=$?
+ # We reconnect the Ethernet connection if any (lp:1471663)
+ WIRED=$(nmcli -f UUID,TYPE c | grep -oP ".*(?=\s+.*ethernet)")
+ if [[ ! -z $WIRED ]]; then
+ nmcli c up uuid $WIRED
+ fi
+ exit $STATUS
+ else
+ exit 1
+ fi
+estimated_duration: 30.0
+_description:
+ Tests that the systems wireless hardware can connect to a router using no
+ security and the 802.11ac protocol.
+
+plugin: user-interact-verify
+category_id: com.canonical.plainbox::wireless
+id: wireless/wireless_connection_wpa_bg_manual
+requires:
+ device.category == 'WIRELESS'
+ environment.ROUTERS == 'single'
+user: root
+environ: ROUTER_SSID ROUTER_PSK
+command:
+ trap "nmcli con delete id $ROUTER_SSID" EXIT
+ if create_connection wifi $ROUTER_SSID --security=wpa --key=$ROUTER_PSK; then
+ connect_wireless # lp:1471663
+ INTERFACE=`nmcli dev status | awk '/802-11-wireless|wifi/ {print $1}'`
+ iw dev $INTERFACE link
+ gateway_ping_test --interface=$INTERFACE
+ STATUS=$?
+ # We reconnect the Ethernet connection if any (lp:1471663)
+ WIRED=$(nmcli -f UUID,TYPE c | grep -oP ".*(?=\s+.*ethernet)")
+ if [[ ! -z $WIRED ]]; then
+ nmcli c up uuid $WIRED
+ fi
+ exit $STATUS
+ else
+ exit 1
+ fi
+estimated_duration: 120.0
+_description:
+ PURPOSE:
+ Tests that the systems wireless hardware can connect to a router using WPA
+ security and the 802.11b/g protocols.
+ STEPS:
+ 1. Open your router's configuration tool
+ 2. Change the settings to only accept connections on the B and G wireless bands
+ 3. Make sure the SSID is set to the contents of the ROUTER_SSID environment variable
+ 4. Change the security settings to use WPA2 and ensure the PSK matches what is set in the ROUTER_PSK environment variable
+ 5. Commence the test to create a connection to the router and test the connection
+ VERIFICATION:
+ Verification is automated, do not change the automatically selected result.
+
+plugin: user-interact-verify
+category_id: com.canonical.plainbox::wireless
+id: wireless/wireless_connection_open_bg_manual
+requires:
+ device.category == 'WIRELESS'
+ environment.ROUTERS == 'single'
+user: root
+environ: ROUTER_SSID
+command:
+ trap "nmcli con delete id $ROUTER_SSID" EXIT
+ if create_connection wifi $ROUTER_SSID; then
+ connect_wireless # lp:1471663
+ INTERFACE=`nmcli dev status | awk '/802-11-wireless|wifi/ {print $1}'`
+ iw dev $INTERFACE link
+ gateway_ping_test --interface=$INTERFACE
+ STATUS=$?
+ # We reconnect the Ethernet connection if any (lp:1471663)
+ WIRED=$(nmcli -f UUID,TYPE c | grep -oP ".*(?=\s+.*ethernet)")
+ if [[ ! -z $WIRED ]]; then
+ nmcli c up uuid $WIRED
+ fi
+ exit $STATUS
+ else
+ exit 1
+ fi
+estimated_duration: 120.0
+_description:
+ PURPOSE:
+ Tests that the systems wireless hardware can connect to a router using
+ no security and the 802.11b/g protocols.
+ STEPS:
+ 1. Open your router's configuration tool
+ 2. Change the settings to only accept connections on the B and G wireless bands
+ 3. Make sure the SSID is set to the contents of the ROUTER_SSID environment variable
+ 4. Change the security settings to use no security
+ 5. Commence the test to create a connection to the router and test the connection
+ VERIFICATION:
+ Verification is automated, do not change the automatically selected result.
+
+plugin: user-interact-verify
+category_id: com.canonical.plainbox::wireless
+id: wireless/wireless_connection_wpa_n_manual
+requires:
+ device.category == 'WIRELESS'
+ environment.ROUTERS == 'single'
+ IEEE_80211.band_5GHz == 'supported'
+user: root
+environ: ROUTER_SSID ROUTER_PSK
+command:
+ trap "nmcli con delete id $ROUTER_SSID" EXIT
+ if create_connection wifi $ROUTER_SSID --security=wpa --key=$ROUTER_PSK; then
+ connect_wireless # lp:1471663
+ INTERFACE=`nmcli dev status | awk '/802-11-wireless|wifi/ {print $1}'`
+ iw dev $INTERFACE link
+ gateway_ping_test --interface=$INTERFACE
+ STATUS=$?
+ # We reconnect the Ethernet connection if any (lp:1471663)
+ WIRED=$(nmcli -f UUID,TYPE c | grep -oP ".*(?=\s+.*ethernet)")
+ if [[ ! -z $WIRED ]]; then
+ nmcli c up uuid $WIRED
+ fi
+ exit $STATUS
+ else
+ exit 1
+ fi
+estimated_duration: 120.0
+_description:
+ PURPOSE:
+ Tests that the systems wireless hardware can connect to a router using WPA
+ security and the 802.11n protocols.
+ STEPS:
+ 1. Open your router's configuration tool
+ 2. Change the settings to only accept connections on the N wireless band
+ 3. Make sure the SSID is set to the contents of the ROUTER_SSID environment variable
+ 4. Change the security settings to use WPA2 and ensure the PSK matches what is set in the ROUTER_PSK environment variable
+ 5. Commence the test to create a connection to the router and test the connection
+ VERIFICATION:
+ Verification is automated, do not change the automatically selected result.
+
+plugin: user-interact-verify
+category_id: com.canonical.plainbox::wireless
+id: wireless/wireless_connection_open_n_manual
+requires:
+ device.category == 'WIRELESS'
+ environment.ROUTERS == 'single'
+ IEEE_80211.band_5GHz == 'supported'
+user: root
+environ: ROUTER_SSID
+command:
+ trap "nmcli con delete id $ROUTER_SSID" EXIT
+ if create_connection wifi $ROUTER_SSID; then
+ connect_wireless # lp:1471663
+ INTERFACE=`nmcli dev status | awk '/802-11-wireless|wifi/ {print $1}'`
+ iw dev $INTERFACE link
+ gateway_ping_test --interface=$INTERFACE
+ STATUS=$?
+ # We reconnect the Ethernet connection if any (lp:1471663)
+ WIRED=$(nmcli -f UUID,TYPE c | grep -oP ".*(?=\s+.*ethernet)")
+ if [[ ! -z $WIRED ]]; then
+ nmcli c up uuid $WIRED
+ fi
+ exit $STATUS
+ else
+ exit 1
+ fi
+estimated_duration: 120.0
+_description:
+ PURPOSE:
+ Tests that the systems wireless hardware can connect to a router using
+ no security and the 802.11n protocol.
+ STEPS:
+ 1. Open your router's configuration tool
+ 2. Change the settings to only accept connections on the N wireless band
+ 3. Make sure the SSID is set to the contents of the ROUTER_SSID environment variable
+ 4. Change the security settings to use no security
+ 5. Commence the test to create a connection to the router and test the connection
+ VERIFICATION:
+ Verification is automated, do not change the automatically selected result.
+
+plugin: user-interact-verify
+category_id: com.canonical.plainbox::wireless
+id: wireless/wireless_connection_wpa_ac_manual
+requires:
+ device.category == 'WIRELESS'
+ environment.ROUTERS == 'single'
+ IEEE_80211.ac == 'supported'
+user: root
+environ: ROUTER_SSID ROUTER_PSK
+command:
+ trap "nmcli con delete id $ROUTER_SSID" EXIT
+ if create_connection wifi $ROUTER_SSID --security=wpa --key=$ROUTER_PSK; then
+ connect_wireless # lp:1471663
+ INTERFACE=`nmcli dev status | awk '/802-11-wireless|wifi/ {print $1}'`
+ iw dev $INTERFACE link
+ gateway_ping_test --interface=$INTERFACE
+ STATUS=$?
+ # We reconnect the Ethernet connection if any (lp:1471663)
+ WIRED=$(nmcli -f UUID,TYPE c | grep -oP ".*(?=\s+.*ethernet)")
+ if [[ ! -z $WIRED ]]; then
+ nmcli c up uuid $WIRED
+ fi
+ exit $STATUS
+ else
+ exit 1
+ fi
+estimated_duration: 120.0
+_description:
+ PURPOSE:
+ Tests that the systems wireless hardware can connect to a router using WPA
+ security and the 802.11ac protocol.
+ STEPS:
+ 1. Open your router's configuration tool
+ 2. Change the settings to only accept connections with the 802.11ac protocol.
+ 3. Make sure the SSID is set to the contents of the ROUTER_SSID environment variable
+ 4. Change the security settings to use WPA2 and ensure the PSK matches what is set in the ROUTER_PSK environment variable
+ 5. Commence the test to create a connection to the router and test the connection
+ VERIFICATION:
+ Verification is automated, do not change the automatically selected result.
+
+plugin: user-interact-verify
+category_id: com.canonical.plainbox::wireless
+id: wireless/wireless_connection_open_ac_manual
+requires:
+ device.category == 'WIRELESS'
+ environment.ROUTERS == 'single'
+ IEEE_80211.ac == 'supported'
+user: root
+environ: ROUTER_SSID
+command:
+ trap "nmcli con delete id $ROUTER_SSID" EXIT
+ if create_connection wifi $ROUTER_SSID; then
+ connect_wireless # lp:1471663
+ INTERFACE=`nmcli dev status | awk '/802-11-wireless|wifi/ {print $1}'`
+ iw dev $INTERFACE link
+ gateway_ping_test --interface=$INTERFACE
+ STATUS=$?
+ # We reconnect the Ethernet connection if any (lp:1471663)
+ WIRED=$(nmcli -f UUID,TYPE c | grep -oP ".*(?=\s+.*ethernet)")
+ if [[ ! -z $WIRED ]]; then
+ nmcli c up uuid $WIRED
+ fi
+ exit $STATUS
+ else
+ exit 1
+ fi
+estimated_duration: 120.0
+_description:
+ PURPOSE:
+ Tests that the systems wireless hardware can connect to a router using
+ no security and the 802.11ac protocol.
+ STEPS:
+ 1. Open your router's configuration tool
+ 2. Change the settings to only accept connections with the 802.11ac protocol.
+ 3. Make sure the SSID is set to the contents of the ROUTER_SSID environment variable
+ 4. Change the security settings to use no security
+ 5. Commence the test to create a connection to the router and test the connection
+ VERIFICATION:
+ Verification is automated, do not change the automatically selected result.
+
+plugin: shell
+category_id: com.canonical.plainbox::wireless
+id: wireless/monitor_wireless_connection
+requires:
+ package.name == 'iperf'
+ device.category == 'WIRELESS'
+user: root
+environ: WPA_BG_SSID WPA_BG_PSK SERVER_IPERF
+command:
+ trap "nmcli con delete id $WPA_BG_SSID" EXIT
+ if create_connection wifi $WPA_BG_SSID --security=wpa --key=$WPA_BG_PSK; then
+ connect_wireless # lp:1471663
+ INTERFACE=`nmcli dev status | awk '/802-11-wireless|wifi/ {print $1}'`
+ iw dev $INTERFACE link
+ iperf -c $SERVER_IPERF -t 300 -i 30
+ STATUS=$?
+ # We reconnect the Ethernet connection if any (lp:1471663)
+ WIRED=$(nmcli -f UUID,TYPE c | grep -oP ".*(?=\s+.*ethernet)")
+ if [[ ! -z $WIRED ]]; then
+ nmcli c up uuid $WIRED
+ fi
+ exit $STATUS
+ else
+ exit 1
+ fi
+estimated_duration: 330.0
+_description:
+ Tests the performance of a system's wireless connection through the iperf tool.
+
+plugin: shell
+category_id: com.canonical.plainbox::wireless
+id: wireless/monitor_wireless_connection_udp
+requires:
+ package.name == 'iperf'
+ device.category == 'WIRELESS'
+user: root
+environ: WPA_BG_SSID WPA_BG_PSK SERVER_IPERF
+command:
+ trap "nmcli con delete id $WPA_BG_SSID" EXIT
+ if create_connection wifi $WPA_BG_SSID --security=wpa --key=$WPA_BG_PSK; then
+ connect_wireless # lp:1471663
+ INTERFACE=`nmcli dev status | awk '/802-11-wireless|wifi/ {print $1}'`
+ iw dev $INTERFACE link
+ iperf -c $SERVER_IPERF -t 300 -i 30 -u -b 100m -p 5050
+ STATUS=$?
+ # We reconnect the Ethernet connection if any (lp:1471663)
+ WIRED=$(nmcli -f UUID,TYPE c | grep -oP ".*(?=\s+.*ethernet)")
+ if [[ ! -z $WIRED ]]; then
+ nmcli c up uuid $WIRED
+ fi
+ exit $STATUS
+ else
+ exit 1
+ fi
+estimated_duration: 330.0
+_description:
+ Tests the performance of a system's wireless connection through the iperf tool, using UDP packets.
+
+plugin: shell
+category_id: com.canonical.plainbox::wireless
+id: wireless/wireless_connection_open_a
+requires:
+ device.category == 'WIRELESS'
+ IEEE_80211.band_5GHz == 'supported'
+user: root
+environ: OPEN_A_SSID
+command:
+ trap "nmcli con delete id $OPEN_A_SSID" EXIT
+ if create_connection wifi $OPEN_A_SSID; then
+ connect_wireless # lp:1471663
+ INTERFACE=`nmcli dev status | awk '/802-11-wireless|wifi/ {print $1}'`
+ iw dev $INTERFACE link
+ gateway_ping_test --interface=$INTERFACE
+ STATUS=$?
+ # We reconnect the Ethernet connection if any (lp:1471663)
+ WIRED=$(nmcli -f UUID,TYPE c | grep -oP ".*(?=\s+.*ethernet)")
+ if [[ ! -z $WIRED ]]; then
+ nmcli c up uuid $WIRED
+ fi
+ exit $STATUS
+ else
+ exit 1
+ fi
+estimated_duration: 30.0
+_description:
+ Test that the system's wireless hardware can connect to a router using the
+ 802.11a protocol. This requires that you have a router pre-configured to only
+ respond to requests on the 802.11a protocol.
+
+plugin: shell
+category_id: com.canonical.plainbox::wireless
+id: wireless/wireless_connection_open_b
+requires:
+ device.category == 'WIRELESS'
+user: root
+environ: OPEN_B_SSID
+command:
+ trap "nmcli con delete id $OPEN_B_SSID" EXIT
+ if create_connection wifi $OPEN_B_SSID; then
+ connect_wireless # lp:1471663
+ INTERFACE=`nmcli dev status | awk '/802-11-wireless|wifi/ {print $1}'`
+ iw dev $INTERFACE link
+ gateway_ping_test --interface=$INTERFACE
+ STATUS=$?
+ # We reconnect the Ethernet connection if any (lp:1471663)
+ WIRED=$(nmcli -f UUID,TYPE c | grep -oP ".*(?=\s+.*ethernet)")
+ if [[ ! -z $WIRED ]]; then
+ nmcli c up uuid $WIRED
+ fi
+ exit $STATUS
+ else
+ exit 1
+ fi
+estimated_duration: 30.0
+_description:
+ Test that the system's wireless hardware can connect to a router using the
+ 802.11b protocol. This requires that you have a router pre-configured to only
+ respond to requests on the 802.11b protocol.
+
+unit: template
+template-resource: device
+template-filter:
+ device.category == 'WIRELESS'
+plugin: shell
+category_id: com.canonical.plainbox::wireless
+id: wireless/stress_performance_device{__index__}_{interface}
+estimated_duration: 330.0
+requires:
+ package.name == 'iperf'
+environ: TEST_TARGET_IPERF
+user: root
+command: network test -i {interface} -t stress
+_description:
+ This test executes iperf to generate a load on the network device {__index__} ({interface}) and then performs a ping test to watch for dropped packets and very large latency periods.
+
+plugin: shell
+category_id: com.canonical.plainbox::wireless
+id: wireless/wireless_connection_open_g
+requires:
+ device.category == 'WIRELESS'
+user: root
+environ: OPEN_G_SSID
+command:
+ trap "nmcli con delete id $OPEN_G_SSID" EXIT
+ if create_connection wifi $OPEN_G_SSID; then
+ connect_wireless # lp:1471663
+ INTERFACE=`nmcli dev status | awk '/802-11-wireless|wifi/ {print $1}'`
+ iw dev $INTERFACE link
+ gateway_ping_test --interface=$INTERFACE
+ STATUS=$?
+ # We reconnect the Ethernet connection if any (lp:1471663)
+ WIRED=$(nmcli -f UUID,TYPE c | grep -oP ".*(?=\s+.*ethernet)")
+ if [[ ! -z $WIRED ]]; then
+ nmcli c up uuid $WIRED
+ fi
+ exit $STATUS
+ else
+ exit 1
+ fi
+estimated_duration: 30.0
+_description:
+ Test that the system's wireless hardware can connect to a router using the
+ 802.11g protocol. This requires that you have a router pre-configured to only
+ respond to requests on the 802.11g protocol.
+
+plugin: shell
+category_id: com.canonical.plainbox::wireless
+id: wireless/wireless_extension
+requires: device.category == 'WIRELESS'
+command: wireless_ext
+estimated_duration: 1.2
+_description:
+ Test that the MAC80211 modules are loaded and wireless extensions are working.
+
+unit: template
+template-resource: device
+template-filter: device.category == 'WIRELESS'
+plugin: shell
+category_id: com.canonical.plainbox::wireless
+id: wireless/iwconfig_check_device{__index__}_{interface}
+estimated_duration: 1.2
+command: iwconfig {interface}
+_description:
+ This test executes iwconfig requests against wireless device {__index__} ({interface}).
+
+plugin: user-interact-verify
+category_id: com.canonical.plainbox::wireless
+id: wireless/wireless_rfkill
+command: rfkill list | zenity --text-info --title rfkill-Info
+estimated_duration: 120.0
+requires: device.category == 'WIRELESS'
+_description:
+ PURPOSE:
+ This test will check whether or not your driver responds to rfkill commands.
+ STEPS:
+ 1. Use the hardware switch on the side of your device to switch off wireless.
+ 2. If you do not have a hardware switch disable wireless from the network manager icon in the panel
+ 3. Click "Test" to verify that the hard or soft blocks are in place.
+ VERIFICATION:
+ Did the hard or soft blocks show on in the dialog?
+
+unit: template
+template-resource: device
+template-filter: device.category == 'WIRELESS'
+plugin: user-interact-verify
+category_id: com.canonical.plainbox::wireless
+id: wireless/maximum_bandwidth_device{__index__}_{interface}
+estimated_duration: 120.0
+requires:
+ package.name == 'zenity'
+ package.name == 'iperf'
+environ: TEST_TARGET_IPERF
+user: root
+command: network test -i {interface} -t iperf 2>&1 | cat - <(echo; echo "Verify the result and click OK to decide on the outcome") | zenity --text-info --title 'mobile broadband max bw {interface}'
+_purpose:
+ User verification of whether the observed transfer throughput is acceptable
+ for the type and maximum speed of wireless device {__index__} ({interface}).
+_steps:
+ 1. Click "Test".
+ 2. Read the network test summary and confirm that the throughput is acceptable.
+ 3. If needed, click "Test" again to repeat the transfer test.
+_verification:
+ Was the reported throughput acceptable for the type and maximum speed of this interface?