Merge #405613 from ~pieq/oem-qa-checkbox:active-directory-generic

1 files changed, 9 insertions, 9 deletions

diff --git a/units/wenshan/jobs.pxu b/units/wenshan/jobs.pxu
index add042e..03a5eb8 100644
--- a/units/wenshan/jobs.pxu
+++ b/units/wenshan/jobs.pxu
@@ -20,7 +20,7 @@ _steps:
 1. Edit the /etc/systemd/timesyncd.conf file to point to the NTP server, and
 make sure the Root Distance value is high enough, e.g.:
 [Time]
- NTP=ad.wenshan.biz
+ NTP=ad.myserver.biz
 RootDistanceMaxSec=15
 2. Restart the time sync service:
 systemctl restart systemd-timesyncd.service
@@ -81,7 +81,7 @@ depends: active-directory/realm-list
 estimated_duration: 1m
 _summary: Join a realm
 _purpose:
- Check that the device can join the Active Directory realm (e.g. ad.wenshan.biz).
+ Check that the device can join the Active Directory realm (e.g. ad.myserver.biz).
 _steps:
 1. Enter the command to join the realm:
 $ sudo realm join <AD_SERVER>
@@ -184,7 +184,7 @@ _steps:
 1. Make sure you are connected on the same network as the Active Directory
 server.
 2. During the installation, check "Use Active Directory".
- 3. Use the credentials of your Active Directory test user (e.g. user1@wenshan.biz)
+ 3. Use the credentials of your Active Directory test user (e.g. user1@myserver.biz)
 _verification:
 The installation completes and you can log in using your Active Directory
 credentials.
@@ -201,10 +201,10 @@ _steps:
 1. In a terminal, switch to super user, then enter the login command:
 $ sudo -i
 # login
- 2. Enter the AD test user account (e.g. user1@wenshan.biz)
+ 2. Enter the AD test user account (e.g. user1@myserver.biz)
 3. Enter the password of your Active Directory test user (e.g. user1)
 _verification:
- Check that a home directory is created for user user1@wenshan.biz and user
+ Check that a home directory is created for user user1@myserver.biz and user
 can type commands on the device (ls, date, etc.).
 
 id: active-directory/login-gui
@@ -218,7 +218,7 @@ _purpose:
 _steps:
 1. Select “Log Out” or “Switch User…” from the Power Menu > "Power Off / Log Out" entry
 2. Select “Not listed?”
- 3. Enter username (e.g. user1@wenshan.biz)
+ 3. Enter username (e.g. user1@myserver.biz)
 4. Enter password and press Enter
 _verification:
 User can log in and access Ubuntu.
@@ -242,11 +242,11 @@ _steps:
 > Account Policies > Password Policy, modify something (e.g. set "Minimum
 password length" to a higher value)
 4. Open "Active Directory Users and Computers"
- 5. Right click on an existing user (e.g. user1@wenshan.biz), select "Properties...",
+ 5. Right click on an existing user (e.g. user1@myserver.biz), select "Properties...",
 and in "Account", check "User must change password at next login"
 .
 B. On the Ubuntu client (either graphically or in a terminal):
- 1. Log in using the user credentials modified in Windows Server (e.g. user1@wenshan.biz)
+ 1. Log in using the user credentials modified in Windows Server (e.g. user1@myserver.biz)
 2. When prompted for a new password, try to type one that does not match the
 requirements set in step A3
 3. Use a password that matches the requirements set in step A3
@@ -270,7 +270,7 @@ _purpose:
 _steps:
 1. Disconnect from the network where the AD server is located
 2. Select “Log Out” or “Switch User…” from the Power Menu > "Power Off / Log Out" entry
- 3. Enter username (e.g. user1@wenshan.biz)
+ 3. Enter username (e.g. user1@myserver.biz)
 4. Enter password and press Enter
 _verification:
 User can log in and access Ubuntu.