missing - platform/external/libnfnetlink - Git at Google

 #! /bin/sh
 # Common stub for a few missing GNU programs while installing.

 scriptversion=2009-04-28.21; # UTC

 # Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006,
 # 2008, 2009 Free Software Foundation, Inc.
 # Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.

 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
 # the Free Software Foundation; either version 2, or (at your option)
 # any later version.

 # This program is distributed in the hope that it will be useful,
 # but WITHOUT ANY WARRANTY; without even the implied warranty of
 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
 # GNU General Public License for more details.

 # You should have received a copy of the GNU General Public License
 # along with this program. If not, see <http://www.gnu.org/licenses/>.

 # As a special exception to the GNU General Public License, if you
 # distribute this file as part of a program that contains a
 # configuration script generated by Autoconf, you may include it under
 # the same distribution terms that you use for the rest of that program.

 if test $# -eq 0; then
  echo 1>&2 "Try \`$0 --help' for more information"
  exit 1
 fi

 run=:
 sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
 sed_minuso='s/.* -o \([^ ]*\).*/\1/p'

 # In the cases where this matters, `missing' is being run in the
 # srcdir already.
 if test -f configure.ac; then
  configure_ac=configure.ac
 else
  configure_ac=configure.in
 fi

 msg="missing on your system"

 case $1 in
 --run)
  # Try to run requested program, and just exit if it succeeds.
  run=
  shift
  "$@" && exit 0
  # Exit code 63 means version mismatch. This often happens
  # when the user try to use an ancient version of a tool on
  # a file that requires a minimum version. In this case we
  # we should proceed has if the program had been absent, or
  # if --run hadn't been passed.
  if test $? = 63; then
  run=:
  msg="probably too old"
  fi
  ;;

  -h|--h|--he|--hel|--help)
  echo "\
 $0 [OPTION]... PROGRAM [ARGUMENT]...

 Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
 error status if there is no known handling for PROGRAM.

 Options:
  -h, --help display this help and exit
  -v, --version output version information and exit
  --run try to run the given command, and emulate it if it fails

 Supported PROGRAM values:
  aclocal touch file \`aclocal.m4'
  autoconf touch file \`configure'
  autoheader touch file \`config.h.in'
  autom4te touch the output file, or create a stub one
  automake touch all \`Makefile.in' files
  bison create \`y.tab.[ch]', if possible, from existing .[ch]
  flex create \`lex.yy.c', if possible, from existing .c
  help2man touch the output file
  lex create \`lex.yy.c', if possible, from existing .c
  makeinfo touch the output file
  tar try tar, gnutar, gtar, then tar without non-portable flags
  yacc create \`y.tab.[ch]', if possible, from existing .[ch]

 Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and
 \`g' are ignored when checking the name.

 Send bug reports to <bug-automake@gnu.org>."
  exit $?
  ;;

  -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
  echo "missing $scriptversion (GNU Automake)"
  exit $?
  ;;

  -*)
  echo 1>&2 "$0: Unknown \`$1' option"
  echo 1>&2 "Try \`$0 --help' for more information"
  exit 1
  ;;

 esac

 # normalize program name to check for.
 program=`echo "$1" | sed '
  s/^gnu-//; t
  s/^gnu//; t
  s/^g//; t'`

 # Now exit if we have it, but it failed. Also exit now if we
 # don't have it and --version was passed (most likely to detect
 # the program). This is about non-GNU programs, so use $1 not
 # $program.
 case $1 in
  lex*|yacc*)
  # Not GNU programs, they don't have --version.
  ;;

  tar*)
  if test -n "$run"; then
  echo 1>&2 "ERROR: \`tar' requires --run"
  exit 1
  elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
  exit 1
  fi
  ;;

  *)
  if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
  # We have it, but it failed.
  exit 1
  elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
  # Could not run --version or --help. This is probably someone
  # running `$TOOL --version' or `$TOOL --help' to check whether
  # $TOOL exists and not knowing $TOOL uses missing.
  exit 1
  fi
  ;;
 esac

 # If it does not exist, or fails to run (possibly an outdated version),
 # try to emulate it.
 case $program in
  aclocal*)
  echo 1>&2 "\
 WARNING: \`$1' is $msg. You should only need it if
  you modified \`acinclude.m4' or \`${configure_ac}'. You might want
  to install the \`Automake' and \`Perl' packages. Grab them from
  any GNU archive site."
  touch aclocal.m4
  ;;

  autoconf*)
  echo 1>&2 "\
 WARNING: \`$1' is $msg. You should only need it if
  you modified \`${configure_ac}'. You might want to install the
  \`Autoconf' and \`GNU m4' packages. Grab them from any GNU
  archive site."
  touch configure
  ;;

  autoheader*)
  echo 1>&2 "\
 WARNING: \`$1' is $msg. You should only need it if
  you modified \`acconfig.h' or \`${configure_ac}'. You might want
  to install the \`Autoconf' and \`GNU m4' packages. Grab them
  from any GNU archive site."
  files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
  test -z "$files" && files="config.h"
  touch_files=
  for f in $files; do
  case $f in
  *:*) touch_files="$touch_files "`echo "$f" |
  sed -e 's/^[^:]*://' -e 's/:.*//'`;;
  *) touch_files="$touch_files $f.in";;
  esac
  done
  touch $touch_files
  ;;

  automake*)
  echo 1>&2 "\
 WARNING: \`$1' is $msg. You should only need it if
  you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
  You might want to install the \`Automake' and \`Perl' packages.
  Grab them from any GNU archive site."
  find . -type f -name Makefile.am -print |
  sed 's/\.am$/.in/' |
  while read f; do touch "$f"; done
  ;;

  autom4te*)
  echo 1>&2 "\
 WARNING: \`$1' is needed, but is $msg.
  You might have modified some files without having the
  proper tools for further handling them.
  You can get \`$1' as part of \`Autoconf' from any GNU
  archive site."

  file=`echo "$*" | sed -n "$sed_output"`
  test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
  if test -f "$file"; then
 touch $file
  else
 test -z "$file" || exec >$file
 echo "#! /bin/sh"
 echo "# Created by GNU Automake missing as a replacement of"
 echo "# $ $@"
 echo "exit 0"
 chmod +x $file
 exit 1
  fi
  ;;

  bison*|yacc*)
  echo 1>&2 "\
 WARNING: \`$1' $msg. You should only need it if
  you modified a \`.y' file. You may need the \`Bison' package
  in order for those modifications to take effect. You can get
  \`Bison' from any GNU archive site."
  rm -f y.tab.c y.tab.h
  if test $# -ne 1; then
  eval LASTARG="\${$#}"
 case $LASTARG in
 *.y)
  SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
  if test -f "$SRCFILE"; then
  cp "$SRCFILE" y.tab.c
  fi
  SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
  if test -f "$SRCFILE"; then
  cp "$SRCFILE" y.tab.h
  fi
  ;;
 esac
  fi
  if test ! -f y.tab.h; then
 echo >y.tab.h
  fi
  if test ! -f y.tab.c; then
 echo 'main() { return 0; }' >y.tab.c
  fi
  ;;

  lex*|flex*)
  echo 1>&2 "\
 WARNING: \`$1' is $msg. You should only need it if
  you modified a \`.l' file. You may need the \`Flex' package
  in order for those modifications to take effect. You can get
  \`Flex' from any GNU archive site."
  rm -f lex.yy.c
  if test $# -ne 1; then
  eval LASTARG="\${$#}"
 case $LASTARG in
 *.l)
  SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
  if test -f "$SRCFILE"; then
  cp "$SRCFILE" lex.yy.c
  fi
  ;;
 esac
  fi
  if test ! -f lex.yy.c; then
 echo 'main() { return 0; }' >lex.yy.c
  fi
  ;;

  help2man*)
  echo 1>&2 "\
 WARNING: \`$1' is $msg. You should only need it if
  you modified a dependency of a manual page. You may need the
  \`Help2man' package in order for those modifications to take
  effect. You can get \`Help2man' from any GNU archive site."

  file=`echo "$*" | sed -n "$sed_output"`
  test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
  if test -f "$file"; then
 touch $file
  else
 test -z "$file" || exec >$file
 echo ".ab help2man is required to generate this page"
 exit $?
  fi
  ;;

  makeinfo*)
  echo 1>&2 "\
 WARNING: \`$1' is $msg. You should only need it if
  you modified a \`.texi' or \`.texinfo' file, or any other file
  indirectly affecting the aspect of the manual. The spurious
  call might also be the consequence of using a buggy \`make' (AIX,
  DU, IRIX). You might want to install the \`Texinfo' package or
  the \`GNU make' package. Grab either from any GNU archive site."
  # The file to touch is that specified with -o ...
  file=`echo "$*" | sed -n "$sed_output"`
  test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
  if test -z "$file"; then
  # ... or it is the one specified with @setfilename ...
  infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
  file=`sed -n '
 /^@setfilename/{
  s/.* \([^ ]*\) *$/\1/
  p
  q
 }' $infile`
  # ... or it is derived from the source name (dir/f.texi becomes f.info)
  test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
  fi
  # If the file does not exist, the user really needs makeinfo;
  # let's fail without touching anything.
  test -f $file || exit 1
  touch $file
  ;;

  tar*)
  shift

  # We have already tried tar in the generic part.
  # Look for gnutar/gtar before invocation to avoid ugly error
  # messages.
  if (gnutar --version > /dev/null 2>&1); then
  gnutar "$@" && exit 0
  fi
  if (gtar --version > /dev/null 2>&1); then
  gtar "$@" && exit 0
  fi
  firstarg="$1"
  if shift; then
 case $firstarg in
 *o*)
  firstarg=`echo "$firstarg" | sed s/o//`
  tar "$firstarg" "$@" && exit 0
  ;;
 esac
 case $firstarg in
 *h*)
  firstarg=`echo "$firstarg" | sed s/h//`
  tar "$firstarg" "$@" && exit 0
  ;;
 esac
  fi

  echo 1>&2 "\
 WARNING: I can't seem to be able to run \`tar' with the given arguments.
  You may want to install GNU tar or Free paxutils, or check the
  command line arguments."
  exit 1
  ;;

  *)
  echo 1>&2 "\
 WARNING: \`$1' is needed, and is $msg.
  You might have modified some files without having the
  proper tools for further handling them. Check the \`README' file,
  it often tells you about the needed prerequisites for installing
  this package. You may also peek at any GNU archive site, in case
  some other package would contain this missing \`$1' program."
  exit 1
  ;;
 esac

 exit 0

 # Local variables:
 # eval: (add-hook 'write-file-hooks 'time-stamp)
 # time-stamp-start: "scriptversion="
 # time-stamp-format: "%:y-%02m-%02d.%02H"
 # time-stamp-time-zone: "UTC"
 # time-stamp-end: "; # UTC"
 # End:
	#! /bin/sh
	# Common stub for a few missing GNU programs while installing.

	scriptversion=2009-04-28.21; # UTC

	# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006,
	# 2008, 2009 Free Software Foundation, Inc.
	# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.

	# This program is free software; you can redistribute it and/or modify
	# it under the terms of the GNU General Public License as published by
	# the Free Software Foundation; either version 2, or (at your option)
	# any later version.

	# This program is distributed in the hope that it will be useful,
	# but WITHOUT ANY WARRANTY; without even the implied warranty of
	# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	# GNU General Public License for more details.

	# You should have received a copy of the GNU General Public License
	# along with this program. If not, see <http://www.gnu.org/licenses/>.

	# As a special exception to the GNU General Public License, if you
	# distribute this file as part of a program that contains a
	# configuration script generated by Autoconf, you may include it under
	# the same distribution terms that you use for the rest of that program.

	if test $# -eq 0; then
	echo 1>&2 "Try \`$0 --help' for more information"
	exit 1
	fi

	run=:
	sed_output='s/.* --output[ =]\([^ ]\)./\1/p'
	sed_minuso='s/.* -o \([^ ]\)./\1/p'

	# In the cases where this matters, `missing' is being run in the
	# srcdir already.
	if test -f configure.ac; then
	configure_ac=configure.ac
	else
	configure_ac=configure.in
	fi

	msg="missing on your system"

	case $1 in
	--run)
	# Try to run requested program, and just exit if it succeeds.
	run=
	shift
	"$@" && exit 0
	# Exit code 63 means version mismatch. This often happens
	# when the user try to use an ancient version of a tool on
	# a file that requires a minimum version. In this case we
	# we should proceed has if the program had been absent, or
	# if --run hadn't been passed.
	if test $? = 63; then
	run=:
	msg="probably too old"
	fi
	;;

	-h\|--h\|--he\|--hel\|--help)
	echo "\
	$0 [OPTION]... PROGRAM [ARGUMENT]...

	Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
	error status if there is no known handling for PROGRAM.

	Options:
	-h, --help display this help and exit
	-v, --version output version information and exit
	--run try to run the given command, and emulate it if it fails

	Supported PROGRAM values:
	aclocal touch file \`aclocal.m4'
	autoconf touch file \`configure'
	autoheader touch file \`config.h.in'
	autom4te touch the output file, or create a stub one
	automake touch all \`Makefile.in' files
	bison create \`y.tab.[ch]', if possible, from existing .[ch]
	flex create \`lex.yy.c', if possible, from existing .c
	help2man touch the output file
	lex create \`lex.yy.c', if possible, from existing .c
	makeinfo touch the output file
	tar try tar, gnutar, gtar, then tar without non-portable flags
	yacc create \`y.tab.[ch]', if possible, from existing .[ch]

	Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and
	\`g' are ignored when checking the name.

	Send bug reports to <bug-automake@gnu.org>."
	exit $?
	;;

	-v\|--v\|--ve\|--ver\|--vers\|--versi\|--versio\|--version)
	echo "missing $scriptversion (GNU Automake)"
	exit $?
	;;

	-*)
	echo 1>&2 "$0: Unknown \`$1' option"
	echo 1>&2 "Try \`$0 --help' for more information"
	exit 1
	;;

	esac

	# normalize program name to check for.
	program=`echo "$1" \| sed '
	s/^gnu-//; t
	s/^gnu//; t
	s/^g//; t'`

	# Now exit if we have it, but it failed. Also exit now if we
	# don't have it and --version was passed (most likely to detect
	# the program). This is about non-GNU programs, so use $1 not
	# $program.
	case $1 in
	lex\|yacc)
	# Not GNU programs, they don't have --version.
	;;

	tar*)
	if test -n "$run"; then
	echo 1>&2 "ERROR: \`tar' requires --run"
	exit 1
	elif test "x$2" = "x--version" \|\| test "x$2" = "x--help"; then
	exit 1
	fi
	;;

	*)
	if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
	# We have it, but it failed.
	exit 1
	elif test "x$2" = "x--version" \|\| test "x$2" = "x--help"; then
	# Could not run --version or --help. This is probably someone
	# running `$TOOL --version' or `$TOOL --help' to check whether
	# $TOOL exists and not knowing $TOOL uses missing.
	exit 1
	fi
	;;
	esac

	# If it does not exist, or fails to run (possibly an outdated version),
	# try to emulate it.
	case $program in
	aclocal*)
	echo 1>&2 "\
	WARNING: \`$1' is $msg. You should only need it if
	you modified \`acinclude.m4' or \`${configure_ac}'. You might want
	to install the \`Automake' and \`Perl' packages. Grab them from
	any GNU archive site."
	touch aclocal.m4
	;;

	autoconf*)
	echo 1>&2 "\
	WARNING: \`$1' is $msg. You should only need it if
	you modified \`${configure_ac}'. You might want to install the
	\`Autoconf' and \`GNU m4' packages. Grab them from any GNU
	archive site."
	touch configure
	;;

	autoheader*)
	echo 1>&2 "\
	WARNING: \`$1' is $msg. You should only need it if
	you modified \`acconfig.h' or \`${configure_ac}'. You might want
	to install the \`Autoconf' and \`GNU m4' packages. Grab them
	from any GNU archive site."
	files=`sed -n 's/^[ ]A[CM]_CONFIG_HEADER(\([^)]\)).*/\1/p' ${configure_ac}`
	test -z "$files" && files="config.h"
	touch_files=
	for f in $files; do
	case $f in
	:) touch_files="$touch_files "`echo "$f" \|
	sed -e 's/^[^:]://' -e 's/:.//'`;;
	*) touch_files="$touch_files $f.in";;
	esac
	done
	touch $touch_files
	;;

	automake*)
	echo 1>&2 "\
	WARNING: \`$1' is $msg. You should only need it if
	you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
	You might want to install the \`Automake' and \`Perl' packages.
	Grab them from any GNU archive site."
	find . -type f -name Makefile.am -print \|
	sed 's/\.am$/.in/' \|
	while read f; do touch "$f"; done
	;;

	autom4te*)
	echo 1>&2 "\
	WARNING: \`$1' is needed, but is $msg.
	You might have modified some files without having the
	proper tools for further handling them.
	You can get \`$1' as part of \`Autoconf' from any GNU
	archive site."

	file=`echo "$*" \| sed -n "$sed_output"`
	test -z "$file" && file=`echo "$*" \| sed -n "$sed_minuso"`
	if test -f "$file"; then
	touch $file
	else
	test -z "$file" \|\| exec >$file
	echo "#! /bin/sh"
	echo "# Created by GNU Automake missing as a replacement of"
	echo "# $ $@"
	echo "exit 0"
	chmod +x $file
	exit 1
	fi
	;;

	bison\|yacc)
	echo 1>&2 "\
	WARNING: \`$1' $msg. You should only need it if
	you modified a \`.y' file. You may need the \`Bison' package
	in order for those modifications to take effect. You can get
	\`Bison' from any GNU archive site."
	rm -f y.tab.c y.tab.h
	if test $# -ne 1; then
	eval LASTARG="\${$#}"
	case $LASTARG in
	*.y)
	SRCFILE=`echo "$LASTARG" \| sed 's/y$/c/'`
	if test -f "$SRCFILE"; then
	cp "$SRCFILE" y.tab.c
	fi
	SRCFILE=`echo "$LASTARG" \| sed 's/y$/h/'`
	if test -f "$SRCFILE"; then
	cp "$SRCFILE" y.tab.h
	fi
	;;
	esac
	fi
	if test ! -f y.tab.h; then
	echo >y.tab.h
	fi
	if test ! -f y.tab.c; then
	echo 'main() { return 0; }' >y.tab.c
	fi
	;;

	lex\|flex)
	echo 1>&2 "\
	WARNING: \`$1' is $msg. You should only need it if
	you modified a \`.l' file. You may need the \`Flex' package
	in order for those modifications to take effect. You can get
	\`Flex' from any GNU archive site."
	rm -f lex.yy.c
	if test $# -ne 1; then
	eval LASTARG="\${$#}"
	case $LASTARG in
	*.l)
	SRCFILE=`echo "$LASTARG" \| sed 's/l$/c/'`
	if test -f "$SRCFILE"; then
	cp "$SRCFILE" lex.yy.c
	fi
	;;
	esac
	fi
	if test ! -f lex.yy.c; then
	echo 'main() { return 0; }' >lex.yy.c
	fi
	;;

	help2man*)
	echo 1>&2 "\
	WARNING: \`$1' is $msg. You should only need it if
	you modified a dependency of a manual page. You may need the
	\`Help2man' package in order for those modifications to take
	effect. You can get \`Help2man' from any GNU archive site."

	file=`echo "$*" \| sed -n "$sed_output"`
	test -z "$file" && file=`echo "$*" \| sed -n "$sed_minuso"`
	if test -f "$file"; then
	touch $file
	else
	test -z "$file" \|\| exec >$file
	echo ".ab help2man is required to generate this page"
	exit $?
	fi
	;;

	makeinfo*)
	echo 1>&2 "\
	WARNING: \`$1' is $msg. You should only need it if
	you modified a \`.texi' or \`.texinfo' file, or any other file
	indirectly affecting the aspect of the manual. The spurious
	call might also be the consequence of using a buggy \`make' (AIX,
	DU, IRIX). You might want to install the \`Texinfo' package or
	the \`GNU make' package. Grab either from any GNU archive site."
	# The file to touch is that specified with -o ...
	file=`echo "$*" \| sed -n "$sed_output"`
	test -z "$file" && file=`echo "$*" \| sed -n "$sed_minuso"`
	if test -z "$file"; then
	# ... or it is the one specified with @setfilename ...
	infile=`echo "$" \| sed 's/. \([^ ]\) $/\1/'`
	file=`sed -n '
	/^@setfilename/{
	s/.* \([^ ]\) $/\1/
	p
	q
	}' $infile`
	# ... or it is derived from the source name (dir/f.texi becomes f.info)
	test -z "$file" && file=`echo "$infile" \| sed 's,./,,;s,.[^.]$,,'`.info
	fi
	# If the file does not exist, the user really needs makeinfo;
	# let's fail without touching anything.
	test -f $file \|\| exit 1
	touch $file
	;;

	tar*)
	shift

	# We have already tried tar in the generic part.
	# Look for gnutar/gtar before invocation to avoid ugly error
	# messages.
	if (gnutar --version > /dev/null 2>&1); then
	gnutar "$@" && exit 0
	fi
	if (gtar --version > /dev/null 2>&1); then
	gtar "$@" && exit 0
	fi
	firstarg="$1"
	if shift; then
	case $firstarg in
	o)
	firstarg=`echo "$firstarg" \| sed s/o//`
	tar "$firstarg" "$@" && exit 0
	;;
	esac
	case $firstarg in
	h)
	firstarg=`echo "$firstarg" \| sed s/h//`
	tar "$firstarg" "$@" && exit 0
	;;
	esac
	fi

	echo 1>&2 "\
	WARNING: I can't seem to be able to run \`tar' with the given arguments.
	You may want to install GNU tar or Free paxutils, or check the
	command line arguments."
	exit 1
	;;

	*)
	echo 1>&2 "\
	WARNING: \`$1' is needed, and is $msg.
	You might have modified some files without having the
	proper tools for further handling them. Check the \`README' file,
	it often tells you about the needed prerequisites for installing
	this package. You may also peek at any GNU archive site, in case
	some other package would contain this missing \`$1' program."
	exit 1
	;;
	esac

	exit 0

	# Local variables:
	# eval: (add-hook 'write-file-hooks 'time-stamp)
	# time-stamp-start: "scriptversion="
	# time-stamp-format: "%:y-%02m-%02d.%02H"
	# time-stamp-time-zone: "UTC"
	# time-stamp-end: "; # UTC"
	# End: