initial refactor of the library - not tested, not even compiled

src/SparkFun_VEML7700_Arduino_Library.h

@@ -1,252 +1,59 @@
-/*!
+/******************************************************************************
  * @file SparkFun_VEML7700_Arduino_Library.h
+ * @brief SparkFun VEML7700 Library header file
  *
- * SparkFun VEML7700 Ambient Light Sensor Arduino Library
+ * This file implements the SparkFunVEML7700 class
+ * for use with the SparkFun VEML7700 sensor qwiic breakout board
  *
- * This library facilitates communication with the VEML7700 over I<sup>2</sup>C.
+ * @author SparkFUn Electronics
+ * @date 2021-2025
+ * @version 2.0.0
+ * @copyright (c) 2021=2025 SparkFun Electronics Inc. This project is released under the MIT License.
  *
- * Want to support open source hardware? Buy a board from SparkFun!
- * <br>SparkX smôl Environmental Peripheral Board (SPX-18976): https://www.sparkfun.com/products/18976
+ * SPDX-License-Identifier: MIT
  *
- * This library was written by:
- * Paul Clark
- * SparkFun Electronics
- * November 4th 2021
- *
- * Please see LICENSE.md for the license information
- *
- */
-
-#ifndef __SFE_SMOL_POWER_BOARD__
-#define __SFE_SMOL_POWER_BOARD__
-
-#include <Arduino.h>
-#include <Wire.h>
-
-typedef uint16_t VEML7700_t;
-
-/** VEML7700 I2C address */
-#define VEML7700_I2C_ADDRESS 0x10
-
-/** VEML7700 error code returns */
-typedef enum
-{
- VEML7700_ERROR_READ = -4,
- VEML7700_ERROR_WRITE = -3,
- VEML7700_ERROR_INVALID_ADDRESS = -2,
- VEML7700_ERROR_UNDEFINED = -1,
- VEML7700_ERROR_SUCCESS = 1
-} VEML7700_error_t;
-const VEML7700_error_t VEML7700_SUCCESS = VEML7700_ERROR_SUCCESS;
-
-/** Sensitivity mode selection */
-typedef enum
-{
- VEML7700_SENSITIVITY_x1,
- VEML7700_SENSITIVITY_x2,
- VEML7700_SENSITIVITY_x1_8,
- VEML7700_SENSITIVITY_x1_4,
- VEML7700_SENSITIVITY_INVALID
-} VEML7700_sensitivity_mode_t;
-
-/** ALS integration time setting
- Note: these are defined here in simple sequential order.
- The actual register settings are defined in VEML7700_config_integration_time_t */
-typedef enum
-{
- VEML7700_INTEGRATION_25ms,
- VEML7700_INTEGRATION_50ms,
- VEML7700_INTEGRATION_100ms,
- VEML7700_INTEGRATION_200ms,
- VEML7700_INTEGRATION_400ms,
- VEML7700_INTEGRATION_800ms,
- VEML7700_INTEGRATION_INVALID
-} VEML7700_integration_time_t;
-
-/** ALS persistence protect number setting */
-typedef enum
-{
- VEML7700_PERSISTENCE_1,
- VEML7700_PERSISTENCE_2,
- VEML7700_PERSISTENCE_4,
- VEML7700_PERSISTENCE_8,
- VEML7700_PERSISTENCE_INVALID
-} VEML7700_persistence_protect_t;
-
-/** ALS interrupt enable setting */
-typedef enum
-{
- VEML7700_INT_DISABLE,
- VEML7700_INT_ENABLE,
- VEML7700_INT_INVALID
-} VEML7700_interrupt_enable_t;
-
-/** ALS interrupt status, logical OR of the crossing low and high thrteshold INT triggers */
-typedef enum
-{
- VEML7700_INT_STATUS_NONE,
- VEML7700_INT_STATUS_HIGH,
- VEML7700_INT_STATUS_LOW,
- VEML7700_INT_STATUS_BOTH,
- VEML7700_INT_STATUS_INVALID
-} VEML7700_interrupt_status_t;
-
-/** ALS shut down setting */
-typedef enum
-{
- VEML7700_POWER_ON,
- VEML7700_SHUT_DOWN,
- VEML7700_SHUTDOWN_INVALID
-} VEML7700_shutdown_t;
-
-/** Communication interface for the VEML7700 */
-class VEML7700
-{
-public:
- /** @brief Class to communicate with the VEML7700 */
- VEML7700();
-
- /** Begin the VEML7700. Default to Wire */
- bool begin(TwoWire &wirePort = Wire);
+ ******************************************************************************/
 
- /** Enable debug messages. Default to Serial */
- void enableDebugging(Stream &debugPort = Serial);
- void disableDebugging();
+#pragma once
 
- bool isConnected();
+// helps to keep the Toolkit header before the tk calls
+// clang-format off
+#include <SparkFun_Toolkit.h>
+#include "sfTk/sfDevVEML7700.h"
+// clang-format on
 
- /** Configuration controls */
-
- VEML7700_error_t setShutdown(VEML7700_shutdown_t);
- VEML7700_error_t powerOn() { return setShutdown(VEML7700_POWER_ON); };
- VEML7700_error_t shutdown() { return setShutdown(VEML7700_SHUT_DOWN); };
- VEML7700_shutdown_t getShutdown();
-
- VEML7700_error_t setInterruptEnable(VEML7700_interrupt_enable_t ie);
- VEML7700_error_t getInterruptEnable(VEML7700_interrupt_enable_t *ie);
- VEML7700_interrupt_enable_t getInterruptEnable();
-
- VEML7700_error_t setPersistenceProtect(VEML7700_persistence_protect_t pp);
- VEML7700_error_t getPersistenceProtect(VEML7700_persistence_protect_t *pp);
- VEML7700_persistence_protect_t getPersistenceProtect();
- const char * getPersistenceProtectStr();
-
- VEML7700_error_t setIntegrationTime(VEML7700_integration_time_t it);
- VEML7700_error_t getIntegrationTime(VEML7700_integration_time_t *it);
- VEML7700_integration_time_t getIntegrationTime();
- const char * getIntegrationTimeStr();
-
- VEML7700_error_t setSensitivityMode(VEML7700_sensitivity_mode_t sm);
- VEML7700_error_t getSensitivityMode(VEML7700_sensitivity_mode_t *sm);
- VEML7700_sensitivity_mode_t getSensitivityMode();
- const char * getSensitivityModeStr();
-
- VEML7700_error_t setHighThreshold(uint16_t threshold);
- VEML7700_error_t getHighThreshold(uint16_t *threshold);
- uint16_t getHighThreshold();
-
- VEML7700_error_t setLowThreshold(uint16_t threshold);
- VEML7700_error_t getLowThreshold(uint16_t *threshold);
- uint16_t getLowThreshold();
-
- /** Read the sensor data */
-
- VEML7700_error_t getAmbientLight(uint16_t *ambient);
- uint16_t getAmbientLight();
-
- VEML7700_error_t getWhiteLevel(uint16_t *whiteLevel);
- uint16_t getWhiteLevel();
-
- VEML7700_error_t getLux(float *lux);
- float getLux();
-
- /** Note: reading the interrupt status register clears the interrupts.
- So, we need to check both interrupt flags in a single read. */
- VEML7700_error_t getInterruptStatus(VEML7700_interrupt_status_t *status);
- VEML7700_interrupt_status_t getInterruptStatus();
-
-private:
-
- /** Provide bit field access to the configuration register */
- typedef struct
- {
- union
- {
- VEML7700_t all;
- struct
- {
- VEML7700_t CONFIG_REG_SD : 1; // ALS shut down
- VEML7700_t CONFIG_REG_INT_EN : 1; // ALS interrupt enable
- VEML7700_t CONFIG_REG_RES1 : 2; // Reserved
- VEML7700_t CONFIG_REG_PERS : 2; // ALS persistence protect number
- VEML7700_t CONFIG_REG_IT : 4; // ALS integration time
- VEML7700_t CONFIG_REG_RES2 : 1; // Reserved
- VEML7700_t CONFIG_REG_SM : 2; // ALS sensitivity mode
- VEML7700_t CONFIG_REG_RES3 : 3; // Reserved
- };
- };
- } VEML7700_CONFIGURATION_REGISTER_t;
- VEML7700_CONFIGURATION_REGISTER_t _configurationRegister;
-
- /** Provide bit field access to the interrupt status register
- Note: reading the interrupt status register clears the interrupts.
- So, we need to check both interrupt flags in a single read. */
- typedef struct
- {
- union
+/**
+ * @brief Class for interfacing with the VMEL7700 sensor using I2C communication
+ *
+ * This class provides methods to initialize and communicate with the BMV080 sensor
+ * over an I2C bus. It inherits from the sfDevVEML7700 class and uses the SparkFun
+ * Toolkit for I2C communication.
+ *
+ * @see sfDevVEML7700
+ */
+class SparkFunVEML7700 : public sfDevVEML7700
+{
+ public:
+ /**
+ * @brief Begins the Device with I2C as the communication bus
+ *
+ * This method initializes the I2C bus and sets up communication with the VEML7700 sensor.
+ *
+ * @param address I2C device address to use for the sensor
+ * @param wirePort Wire port to use for I2C communication
+ * @return True if successful, false otherwise
+ */
+ bool begin(const uint8_t address = SF_VEML7700_DEFAULT_ADDRESS, TwoWire &wirePort = Wire)
  {
- VEML7700_t all;
- struct
- {
- VEML7700_t INT_STATUS_REG_RES : 14; // Reserved
- // Bit 14 indicates if the high threshold was exceeded
- // Bit 15 indicates if the low threshold was exceeded
- VEML7700_t INT_STATUS_REG_INT_FLAGS : 2;
- };
- };
- } VEML7700_INTERRUPT_STATUS_REGISTER_t;
-
- /** VEML7700 Registers */
- typedef enum
- {
- VEML7700_CONFIGURATION_REGISTER,
- VEML7700_HIGH_THRESHOLD,
- VEML7700_LOW_THRESHOLD,
- VEML7700_ALS_OUTPUT = 4,
- VEML7700_WHITE_OUTPUT,
- VEML7700_INTERRUPT_STATUS
- } VEML7700_registers_t;
-
- /** ALS integration time setting */
- typedef enum
- {
- VEML7700_CONFIG_INTEGRATION_25ms = 0b1100,
- VEML7700_CONFIG_INTEGRATION_50ms = 0b1000,
- VEML7700_CONFIG_INTEGRATION_100ms = 0b0000,
- VEML7700_CONFIG_INTEGRATION_200ms = 0b0001,
- VEML7700_CONFIG_INTEGRATION_400ms = 0b0010,
- VEML7700_CONFIG_INTEGRATION_800ms = 0b0011,
- VEML7700_CONFIG_INTEGRATION_INVALID
- } VEML7700_config_integration_time_t;
+ // Setup Arduino I2C bus
+ _theI2CBus.init(wirePort, address);
 
- TwoWire *_i2cPort;
- Stream *_debugPort;
- uint8_t _deviceAddress;
- bool _debugEnabled;
+ // Begin the sensor
+ sfTkError_t rc = sfDevVEML7700::begin(&_theI2CBus);
 
- VEML7700_error_t _connected(void);
-
- /** I2C Read/Write */
- VEML7700_error_t readI2CBuffer(uint8_t *dest, VEML7700_registers_t startRegister, uint16_t len);
- VEML7700_error_t writeI2CBuffer(uint8_t *src, VEML7700_registers_t startRegister, uint16_t len);
- VEML7700_error_t readI2CRegister(VEML7700_t *dest, VEML7700_registers_t registerAddress);
- VEML7700_error_t writeI2CRegister(VEML7700_t data, VEML7700_registers_t registerAddress);
-
- /** Convert the (sequential) integration time into the corresponding (non-sequential) configuration value */
- VEML7700_config_integration_time_t integrationTimeConfig(VEML7700_integration_time_t it);
- /** Convert the (non-sequential) integration time config into the corresponding (sequential) integration time */
- VEML7700_integration_time_t integrationTimeFromConfig(VEML7700_config_integration_time_t it);
+ return rc == ksfTkErrOk ? isConnected() : false;
+ }
 
+ private:
+ sfTkArdI2C _theI2CBus;
 };
-
-#endif