Fail to install on chromebook

[xzhang222]

Try to install PyMuPDF on chromebook in linux container by "sudo pip3 install PyMuPDF", get following error messages:

Failed building wheel for PyMuPDF
Running setup.py clean for PyMuPDF
Failed to build PyMuPDF
Installing collected packages: PyMuPDF
Running setup.py install for PyMuPDF ... error
Complete output from command /usr/bin/python3 -u -c "import setuptools, tokenize;file='/tmp/pip-install-1chhb5fg/PyMuPDF/setup.py';f=getattr(tokenize, 'open', open)(file);code=f.read().replace('\r\n', '\n');f.close();exec(compile(code, file, 'exec'))" install --record /tmp/pip-record-fig12_46/install-record.txt --single-version-externally-managed --compile:
running install
running build
running build_py
creating build
creating build/lib.linux-x86_64-3.7
creating build/lib.linux-x86_64-3.7/fitz
copying fitz/init.py -> build/lib.linux-x86_64-3.7/fitz
copying fitz/fitz.py -> build/lib.linux-x86_64-3.7/fitz
copying fitz/utils.py -> build/lib.linux-x86_64-3.7/fitz
copying fitz/main.py -> build/lib.linux-x86_64-3.7/fitz
running build_ext
building 'fitz._fitz' extension
creating build/temp.linux-x86_64-3.7
creating build/temp.linux-x86_64-3.7/fitz
x86_64-linux-gnu-gcc -pthread -DNDEBUG -g -fwrapv -O2 -Wall -g -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -fPIC -I/usr/include/mupdf -I/usr/local/include/mupdf -Imupdf/thirdparty/freetype/include -I/usr/include/freetype2 -I/usr/include/python3.7m -c fitz/fitz_wrap.c -o build/temp.linux-x86_64-3.7/fitz/fitz_wrap.o
fitz/fitz_wrap.c:2754:10: fatal error: fitz.h: No such file or directory
#include <fitz.h>
^~~~~~~~
compilation terminated.
error: command 'x86_64-linux-gnu-gcc' failed with exit status 1

If there ways to fix this problem?

[JorjMcKie]

Bad timing! I am just uploading v1.18.15, and so far only the source is done. Either wait some time or install pymupdf==1.18.14 Von meinem iPhone gesendet Am 10/7/21 um 10:22 schrieb xzhang222 ***@***.***>:  Try to install PyMuPDF on chromebook in linux container by "sudo pip3 install PyMuPDF", get following error messages: Failed building wheel for PyMuPDF Running setup.py clean for PyMuPDF Failed to build PyMuPDF Installing collected packages: PyMuPDF Running setup.py install for PyMuPDF ... error Complete output from command /usr/bin/python3 -u -c "import setuptools, tokenize;file='/tmp/pip-install-1chhb5fg/PyMuPDF/setup.py';f=getattr(tokenize, 'open', open)(file);code=f.read().replace('\r\n', '\n');f.close();exec(compile(code, file, 'exec'))" install --record /tmp/pip-record-fig12_46/install-record.txt --single-version-externally-managed --compile: running install running build running build_py creating build creating build/lib.linux-x86_64-3.7 creating build/lib.linux-x86_64-3.7/fitz copying fitz/init.py -> build/lib.linux-x86_64-3.7/fitz copying fitz/fitz.py -> build/lib.linux-x86_64-3.7/fitz copying fitz/utils.py -> build/lib.linux-x86_64-3.7/fitz copying fitz/main.py -> build/lib.linux-x86_64-3.7/fitz running build_ext building 'fitz._fitz' extension creating build/temp.linux-x86_64-3.7 creating build/temp.linux-x86_64-3.7/fitz x86_64-linux-gnu-gcc -pthread -DNDEBUG -g -fwrapv -O2 -Wall -g -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -fPIC -I/usr/include/mupdf -I/usr/local/include/mupdf -Imupdf/thirdparty/freetype/include -I/usr/include/freetype2 -I/usr/include/python3.7m -c fitz/fitz_wrap.c -o build/temp.linux-x86_64-3.7/fitz/fitz_wrap.o fitz/fitz_wrap.c:2754:10: fatal error: fitz.h: No such file or directory #include <fitz.h> ^~~~~~~~ compilation terminated. error: command 'x86_64-linux-gnu-gcc' failed with exit status 1 If there ways to fix this problem? — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub<#1135>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/AB7IDISHBJXQTZR5ODNK3N3TXBJSZANCNFSM5AEI5RMA>.

[xzhang222]

Thanks for quick response. I tried 1.18.14 and get same problem as shown below. I feel this problem is specific to linux on chromebook, as I find installation on Macbook goes correctly.

xdzhang2@penguin:~$ sudo pip3 install pymupdf==1.18.14
Collecting pymupdf==1.18.14
Using cached https://files.pythonhosted.org/packages/41/f6/dbefe3d6949fa81fb7bcac9141e4345330d272724718ac5a6af78297498b/PyMuPDF-1.18.14.tar.gz
Building wheels for collected packages: pymupdf
Running setup.py bdist_wheel for pymupdf ... error
Complete output from command /usr/bin/python3 -u -c "import setuptools, tokenize;file='/tmp/pip-install-y_zuj2x6/pymupdf/setup.py';f=getattr(tokenize, 'open', open)(file);code=f.read().replace('\r\n', '\n');f.close();exec(compile(code, file, 'exec'))" bdist_wheel -d /tmp/pip-wheel-ioscfyvg --python-tag cp37:
running bdist_wheel
running build
running build_py
creating build
creating build/lib.linux-x86_64-3.7
creating build/lib.linux-x86_64-3.7/fitz
copying fitz/init.py -> build/lib.linux-x86_64-3.7/fitz
copying fitz/fitz.py -> build/lib.linux-x86_64-3.7/fitz
copying fitz/utils.py -> build/lib.linux-x86_64-3.7/fitz
copying fitz/main.py -> build/lib.linux-x86_64-3.7/fitz
running build_ext
building 'fitz._fitz' extension
creating build/temp.linux-x86_64-3.7
creating build/temp.linux-x86_64-3.7/fitz
x86_64-linux-gnu-gcc -pthread -DNDEBUG -g -fwrapv -O2 -Wall -g -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -fPIC -I/usr/include/mupdf -I/usr/local/include/mupdf -Imupdf/thirdparty/freetype/include -I/usr/include/freetype2 -I/usr/include/python3.7m -c fitz/fitz_wrap.c -o build/temp.linux-x86_64-3.7/fitz/fitz_wrap.o
fitz/fitz_wrap.c:2754:10: fatal error: fitz.h: No such file or directory
#include <fitz.h>
^~~~~~~~
compilation terminated.
error: command 'x86_64-linux-gnu-gcc' failed with exit status 1

---

Failed building wheel for pymupdf
Running setup.py clean for pymupdf
Failed to build pymupdf
Installing collected packages: pymupdf
Running setup.py install for pymupdf ... error
Complete output from command /usr/bin/python3 -u -c "import setuptools, tokenize;file='/tmp/pip-install-y_zuj2x6/pymupdf/setup.py';f=getattr(tokenize, 'open', open)(file);code=f.read().replace('\r\n', '\n');f.close();exec(compile(code, file, 'exec'))" install --record /tmp/pip-record-abgutj43/install-record.txt --single-version-externally-managed --compile:
running install
running build
running build_py
creating build
creating build/lib.linux-x86_64-3.7
creating build/lib.linux-x86_64-3.7/fitz
copying fitz/init.py -> build/lib.linux-x86_64-3.7/fitz
copying fitz/fitz.py -> build/lib.linux-x86_64-3.7/fitz
copying fitz/utils.py -> build/lib.linux-x86_64-3.7/fitz
copying fitz/main.py -> build/lib.linux-x86_64-3.7/fitz
running build_ext
building 'fitz._fitz' extension
creating build/temp.linux-x86_64-3.7
creating build/temp.linux-x86_64-3.7/fitz
x86_64-linux-gnu-gcc -pthread -DNDEBUG -g -fwrapv -O2 -Wall -g -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -fPIC -I/usr/include/mupdf -I/usr/local/include/mupdf -Imupdf/thirdparty/freetype/include -I/usr/include/freetype2 -I/usr/include/python3.7m -c fitz/fitz_wrap.c -o build/temp.linux-x86_64-3.7/fitz/fitz_wrap.o
fitz/fitz_wrap.c:2754:10: fatal error: fitz.h: No such file or directory
#include <fitz.h>
^~~~~~~~
compilation terminated.
error: command 'x86_64-linux-gnu-gcc' failed with exit status 1

[JorjMcKie]

Ah ok. Then obviously this Linux is not supported by any of the wheels, so that you have to install from sources - see docu. *Or* you don’t have the most current PIP installed. One of the very problems. Von meinem iPhone gesendet Am 10/7/21 um 10:43 schrieb xzhang222 ***@***.***>:  Thanks for quick response. I tried 1.18.14 and get same problem as shown below. I feel this problem is specific to linux on chromebook, as I find installation on Macbook goes correctly. ***@***.***:~$ sudo pip3 install pymupdf==1.18.14 Collecting pymupdf==1.18.14 Using cached https://files.pythonhosted.org/packages/41/f6/dbefe3d6949fa81fb7bcac9141e4345330d272724718ac5a6af78297498b/PyMuPDF-1.18.14.tar.gz Building wheels for collected packages: pymupdf Running setup.py bdist_wheel for pymupdf ... error Complete output from command /usr/bin/python3 -u -c "import setuptools, tokenize;file='/tmp/pip-install-y_zuj2x6/pymupdf/setup.py';f=getattr(tokenize, 'open', open)(file);code=f.read().replace('\r\n', '\n');f.close();exec(compile(code, file, 'exec'))" bdist_wheel -d /tmp/pip-wheel-ioscfyvg --python-tag cp37: running bdist_wheel running build running build_py creating build creating build/lib.linux-x86_64-3.7 creating build/lib.linux-x86_64-3.7/fitz copying fitz/init.py -> build/lib.linux-x86_64-3.7/fitz copying fitz/fitz.py -> build/lib.linux-x86_64-3.7/fitz copying fitz/utils.py -> build/lib.linux-x86_64-3.7/fitz copying fitz/main.py -> build/lib.linux-x86_64-3.7/fitz running build_ext building 'fitz._fitz' extension creating build/temp.linux-x86_64-3.7 creating build/temp.linux-x86_64-3.7/fitz x86_64-linux-gnu-gcc -pthread -DNDEBUG -g -fwrapv -O2 -Wall -g -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -fPIC -I/usr/include/mupdf -I/usr/local/include/mupdf -Imupdf/thirdparty/freetype/include -I/usr/include/freetype2 -I/usr/include/python3.7m -c fitz/fitz_wrap.c -o build/temp.linux-x86_64-3.7/fitz/fitz_wrap.o fitz/fitz_wrap.c:2754:10: fatal error: fitz.h: No such file or directory #include <fitz.h> ^~~~~~~~ compilation terminated. error: command 'x86_64-linux-gnu-gcc' failed with exit status 1

…

________________________________ Failed building wheel for pymupdf Running setup.py clean for pymupdf Failed to build pymupdf Installing collected packages: pymupdf Running setup.py install for pymupdf ... error Complete output from command /usr/bin/python3 -u -c "import setuptools, tokenize;file='/tmp/pip-install-y_zuj2x6/pymupdf/setup.py';f=getattr(tokenize, 'open', open)(file);code=f.read().replace('\r\n', '\n');f.close();exec(compile(code, file, 'exec'))" install --record /tmp/pip-record-abgutj43/install-record.txt --single-version-externally-managed --compile: running install running build running build_py creating build creating build/lib.linux-x86_64-3.7 creating build/lib.linux-x86_64-3.7/fitz copying fitz/init.py -> build/lib.linux-x86_64-3.7/fitz copying fitz/fitz.py -> build/lib.linux-x86_64-3.7/fitz copying fitz/utils.py -> build/lib.linux-x86_64-3.7/fitz copying fitz/main.py -> build/lib.linux-x86_64-3.7/fitz running build_ext building 'fitz._fitz' extension creating build/temp.linux-x86_64-3.7 creating build/temp.linux-x86_64-3.7/fitz x86_64-linux-gnu-gcc -pthread -DNDEBUG -g -fwrapv -O2 -Wall -g -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -fPIC -I/usr/include/mupdf -I/usr/local/include/mupdf -Imupdf/thirdparty/freetype/include -I/usr/include/freetype2 -I/usr/include/python3.7m -c fitz/fitz_wrap.c -o build/temp.linux-x86_64-3.7/fitz/fitz_wrap.o fitz/fitz_wrap.c:2754:10: fatal error: fitz.h: No such file or directory #include <fitz.h> ^~~~~~~~ compilation terminated. error: command 'x86_64-linux-gnu-gcc' failed with exit status 1 — You are receiving this because you commented. Reply to this email directly, view it on GitHub<#1135 (reply in thread)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/AB7IDIX6RUIQURZLFTN54ZDTXBMC3ANCNFSM5AEI5RMA>.