UART how to read 300 bytes ?

[trix]

hello,

I actually have to read a row of 300 bytes from a home made scanner.
I send a request to send it, and then I get the 300 bytes sent.
Of course I have to store it somewhere.
is that possible in one go?
or is that limited?
I read somewhere that there is a maximum of 32, but i am not really sure what that actually means.
thank you.

[deanhystad]

Should be no problem getting 300 bytes in one go, unless there is a limitation in the device you are using. Is this a raspberry pi or something similar? What is the format of the data in the 300 bytes? You might have to unpack the bytes to get in a format you can use.

[trix]

the data is comming from a atmega32,
and i wil received it in a raspberry pico.

if it is possible i want to store it binair, just "1" and "0".

[deanhystad]

There is no such thing as binary in python. You can get a str which is the binary representation of an int, but that is the characters "0" and "1", not one bit values.

Will the data be 300 0/1 values or 300 bytes, each having 8 bits of 0/1 data?

[guerrillalocal]

Yeah, there might be a solution for it.

[trix]

Will the data be 300 0/1 values or 300 bytes, each having 8 bits of 0/1 data?

that last one, 300 bytes with 8 bits in it.

[DeaD_EyE]

from machine import UART def get_scanner_row(uart: UART) -> bytearray: """ Send request to scanner, receive 300 bytes and return them. """ response_buffer = bytearray(300) # https://docs.micropython.org/en/latest/library/machine.UART.html#machine.UART.write uart.write(b"your command to get the resopnse of 300 bytes\r\n") # https://docs.micropython.org/en/latest/library/machine.UART.html#machine.UART.readinto # blocking call until response_buffer is full uart.readinto(response_buffer) return response_buffer # https://docs.micropython.org/en/latest/library/machine.UART.html#class-uart-duplex-serial-communication-bus uart = UART(1, 9600) # blocks until 300 bytes are received # the response is a bytearray response = get_scanner_row(uart) # printing the data byte for byte # in binary form for index, value in enumerate(response): print(f"Byte {index:>3d}: {value:0b}")

Code is not tested. Just as a starting point, how to send data via micropython.

[trix]

that's clearly code written by an expert.
I'll see if I can figure that out
thanks for your help.