EasySNMP Walk/BulkWalk

[pylance]

Hello,
1st post for me, new to python.. very new..
I am working on a project and need a little help.
I am only getting 1 results with any of the commands in easysnmp.
Not the sub oids that I get in a commandline or mib broswer.

I run this code, and I left some of the testing methods commented out trying to different methods.

from easysnmp import Session import time, start = time.time() ap450 = 'PMP 450' ap450i = 'PMP 450i' ap450m = 'PMP 450m' def test(host): start = time.time() session = Session(hostname=host, community='public', version=2) print('start') productTypeName = session.get('.1.3.6.1.4.1.161.19.3.3.1.266.0') aptype = productTypeName.value print(aptype) if aptype == ap450m: print('found 450M') # whispBridgeMacAddr = session.get('.1.3.6.1.4.1.161.19.3.3.1.3.0') print(whispBridgeMacAddr.value) dump_ap = session.bulkwalk('.1.3.6.1.4.1.161.19.3.1.4.1.69',non_repeaters=0, max_repetitions=10) # dump_ap = session.bulkwalk('oid',non_repeaters=0, max_repetitions=10) # dump_ap = session.walk('.1.3.6.1.4.1.161.19.3.1.4.1.69') # dump_ap = session.walk('oid') for item in dump_ap: with open('ap_dump/' + '450m_' + '%s.txt' % whispBridgeMacAddr.value, 'a') as sm_dump: sm_dump.writelines("%s\n" % l for l in [item.value]) #print([item.value]) break elif aptype == ap450i: print ('found 450i') # with open ('bulkwalk/' + '450_bulkwalk_sm_stats.txt', 'r') as oids: for oid in oids: whispBridgeMacAddr = session.get('.1.3.6.1.4.1.161.19.3.3.1.3.0') print(whispBridgeMacAddr.value) dump_ap = session.bulkwalk('.1.3.6.1.4.1.161.19.3.1.4.1.69',non_repeaters=0, max_repetitions=10) # dump_ap = session.bulkwalk('oid',non_repeaters=0, max_repetitions=10) # dump_ap = session.walk('.1.3.6.1.4.1.161.19.3.1.4.1.69') # dump_ap = session.walk('oid') for item in dump_ap: with open('ap_dump/' + '450i_' + '%s.txt' % whispBridgeMacAddr.value, 'a') as sm_dump: sm_dump.writelines("%s\n" % l for l in [item.value]) #print([item.value]) break elif aptype == ap450: print('found 450') # with open ('bulkwalk/' + '450_bulkwalk_sm_stats.txt', 'r') as oids: for oid in oids: whispBridgeMacAddr = session.get('.1.3.6.1.4.1.161.19.3.3.1.3.0') print(whispBridgeMacAddr.value) dump_ap = session.bulkwalk('.1.3.6.1.4.1.161.19.3.1.4.1.69',non_repeaters=0, max_repetitions=10) # dump_ap = session.bulkwalk('oid',non_repeaters=0, max_repetitions=10) # dump_ap = session.walk('.1.3.6.1.4.1.161.19.3.1.4.1.69') # dump_ap = session.walk('oid') for item in dump_ap: with open('ap_dump/' + '450_' + '%s.txt' % whispBridgeMacAddr.value, 'a') as sm_dump: sm_dump.writelines("%s\n" % l for l in [item.value]) #print([item.value]) break else: print('no aps found') print('It took', time.time()-start, 'seconds.') print('end') def init_test1(): with open('apips.txt', 'r') as ips: for ip in ips: test(ip.strip()) #with open ('bulkwalk/' + '450_bulkwalk_sm_stats.txt', 'r') as oids: # for oid in oids: init_test1()

Commandline output

snmpwalk -v 2c -c public 10.32.229.14 .1.3.6.1.4.1.161.19.3.1.4.1.69 iso.3.6.1.4.1.161.19.3.1.4.1.69.2 = IpAddress: 10.32.167.101 iso.3.6.1.4.1.161.19.3.1.4.1.69.3 = IpAddress: 10.32.166.128 iso.3.6.1.4.1.161.19.3.1.4.1.69.4 = IpAddress: 10.32.167.79 iso.3.6.1.4.1.161.19.3.1.4.1.69.5 = IpAddress: 10.32.167.115 iso.3.6.1.4.1.161.19.3.1.4.1.69.7 = IpAddress: 10.32.166.53 iso.3.6.1.4.1.161.19.3.1.4.1.69.8 = IpAddress: 10.32.166.166 iso.3.6.1.4.1.161.19.3.1.4.1.69.9 = IpAddress: 10.32.167.192

on the surface it appears the code works, until I look at the file.

start PMP 450m found 450M 0a-00-3e-60-c5-d6 It took 2.4697763919830322 seconds. end start PMP 450i found 450i 0a-00-3e-bb-50-2b It took 1.848592758178711 seconds. end start PMP 450 found 450 0a-00-3e-b2-c1-62 It took 1.206430196762085 seconds. end

Thanks for any help.

[pylance]

I have tested this with .get and it pulls the same info, if I use .walk with a single ip and oid.. I get the correct info.
When passing ips or oids from a list is where the system seems to break..
any feed back apperciated

[pylance]

I solved the issue above..
however I believe it to be a little messy with the connection.
I am creating a new connection to run each walk command, I cant seem to think of a way to run all of the OID's during 1 session with this..
Also the output is not as desired atm, but am working on that.
initial function, added argument

def test(host,oid):

passing new arguments

def init_test5(): with open('apips.txt', 'r') as ips: for x in ips: with open ('bulkwalk/' + '450_bulkwalk_sm_stats.txt', 'r') as oids: for y in oids: test(x.strip(), y.strip())

[pylance]

i solved this.