zephyr: gpio: Simplify usage

The gpio driver's 'token' to ensure uniqueness doesn't really help with correctness (as C code can use the gpio device as well). Short of re-defining the gpio interfaces, remove this token entirely, and make only the `get_instance` of gpio unsafe, to indicate that the safety of GPIO operations is dependent on the underlying controller. This should improve the hygeine of the GPIO API significantly, and allow uses, such as waiting on multiple pins, to be possible. Signed-off-by: David Brown <david.brown@linaro.org>

Author: d3zd3z

samples/blinky/src/lib.rs

@@ -10,7 +10,7 @@
 
 use log::warn;
 
-use zephyr::raw::GPIO_OUTPUT_ACTIVE;
+use zephyr::raw::ZR_GPIO_OUTPUT_ACTIVE;
 use zephyr::time::{sleep, Duration};
 
 #[no_mangle]
@@ -29,21 +29,16 @@ fn do_blink() {
  warn!("Inside of blinky");
 
  let mut led0 = zephyr::devicetree::aliases::led0::get_instance().unwrap();
- let mut gpio_token = unsafe { zephyr::device::gpio::GpioToken::get_instance().unwrap() };
 
  if !led0.is_ready() {
  warn!("LED is not ready");
  loop {}
  }
 
- unsafe {
- led0.configure(&mut gpio_token, GPIO_OUTPUT_ACTIVE);
- }
+ led0.configure(ZR_GPIO_OUTPUT_ACTIVE);
  let duration = Duration::millis_at_least(500);
  loop {
- unsafe {
- led0.toggle_pin(&mut gpio_token);
- }
+ led0.toggle_pin();
  sleep(duration);
  }
 }

zephyr/src/device/gpio.rs

@@ -37,7 +37,7 @@ mod async_io {
 
  use crate::sync::atomic::{AtomicBool, AtomicU32};
 
- use super::{GpioPin, GpioToken};
+ use super::GpioPin;
 
  pub(crate) struct GpioStatic {
  /// The wakers for each of the gpios.
@@ -158,26 +158,17 @@ mod async_io {
  ///
  /// # Safety
  ///
- /// The `_token` enforces single use of gpios. Note that this makes it impossible to wait for
- /// more than one GPIO.
- ///
- pub unsafe fn wait_for_high(
- &mut self,
- _token: &mut GpioToken,
- ) -> impl Future<Output = ()> + use<'_> {
+ /// Safety of multiple GPIOs depends on the underlying controller.
+ pub unsafe fn wait_for_high(&mut self) -> impl Future<Output = ()> + use<'_> {
  GpioWait::new(self, 1)
  }
 
  /// Asynchronously wait for a gpio pin to become low.
  ///
  /// # Safety
  ///
- /// The `_token` enforces single use of gpios. Note that this makes it impossible to wait
- /// for more than one GPIO.
- pub unsafe fn wait_for_low(
- &mut self,
- _token: &mut GpioToken,
- ) -> impl Future<Output = ()> + use<'_> {
+ /// Safety of multiple GPIOs depends on the underlying controller.
+ pub unsafe fn wait_for_low(&mut self) -> impl Future<Output = ()> + use<'_> {
  GpioWait::new(self, 0)
  }
  }
@@ -245,35 +236,6 @@ mod async_io {
 
 pub(crate) use async_io::*;
 
-/// Global instance to help make gpio in Rust slightly safer.
-///
-/// # Safety
-///
-/// To help with safety, the rust types use a global instance of a gpio-token. Methods will
-/// take a mutable reference to this, which will require either a single thread in the
-/// application code, or something like a mutex or critical section to manage. The operation
-/// methods are still unsafe, because we have no control over what happens with the gpio
-/// operations outside of Rust code, but this will help make the Rust usage at least better.
-pub struct GpioToken(());
-
-static GPIO_TOKEN: Unique = Unique::new();
-
-impl GpioToken {
- /// Retrieves the gpio token.
- ///
- /// # Safety
- /// This is unsafe because lots of code in zephyr operates on the gpio drivers. The user of the
- /// gpio subsystem, in general should either coordinate all gpio access across the system (the
- /// token coordinates this only within Rust code), or verify that the particular gpio driver and
- /// methods are thread safe.
- pub unsafe fn get_instance() -> Option<GpioToken> {
- if !GPIO_TOKEN.once() {
- return None;
- }
- Some(GpioToken(()))
- }
-}
-
 /// A single instance of a zephyr device to manage a gpio controller. A gpio controller
 /// represents a set of gpio pins, that are generally operated on by the same hardware block.
 pub struct Gpio {
@@ -312,9 +274,7 @@ impl Gpio {
 
 /// A GpioPin represents a single pin on a gpio device.
 ///
-/// This is a lightweight wrapper around the Zephyr `gpio_dt_spec` structure. Note that
-/// multiple pins may share a gpio controller, and as such, all methods on this are both unsafe,
-/// and require a mutable reference to the [`GpioToken`].
+/// This is a lightweight wrapper around the Zephyr `gpio_dt_spec` structure.
 #[allow(dead_code)]
 pub struct GpioPin {
  pub(crate) pin: raw::gpio_dt_spec,
@@ -366,10 +326,8 @@ impl GpioPin {
  ///
  /// # Safety
  ///
- /// The `_token` enforces single threaded use of gpios from Rust code. However, many drivers
- /// within Zephyr use GPIOs, and to use gpios safely, the caller must ensure that there is
- /// either not simultaneous use, or the gpio driver in question is thread safe.
- pub unsafe fn configure(&mut self, _token: &mut GpioToken, extra_flags: raw::gpio_flags_t) {
+ /// Concurrency safety is determined by the underlying driver.
+ pub fn configure(&mut self, extra_flags: raw::gpio_flags_t) {
  // TODO: Error?
  unsafe {
  raw::gpio_pin_configure(
@@ -384,27 +342,29 @@ impl GpioPin {
  ///
  /// # Safety
  ///
- /// The `_token` enforces single threaded use of gpios from Rust code. However, many drivers
- /// within Zephyr use GPIOs, and to use gpios safely, the caller must ensure that there is
- /// either not simultaneous use, or the gpio driver in question is thread safe.
- pub unsafe fn toggle_pin(&mut self, _token: &mut GpioToken) {
+ /// Concurrency safety is determined by the underlying driver.
+ pub fn toggle_pin(&mut self) {
  // TODO: Error?
  unsafe {
  raw::gpio_pin_toggle_dt(&self.pin);
  }
  }
 
  /// Set the logical level of the pin.
- pub unsafe fn set(&mut self, _token: &mut GpioToken, value: bool) {
- raw::gpio_pin_set_dt(&self.pin, value as c_int);
+ pub fn set(&mut self, value: bool) {
+ unsafe {
+ raw::gpio_pin_set_dt(&self.pin, value as c_int);
+ }
  }
 
  /// Read the logical level of the pin.
- pub unsafe fn get(&mut self, _token: &mut GpioToken) -> bool {
- match raw::gpio_pin_get_dt(&self.pin) {
- 0 => false,
- 1 => true,
- _ => panic!("TODO: Handle gpio get error"),
+ pub fn get(&mut self) -> bool {
+ unsafe {
+ match raw::gpio_pin_get_dt(&self.pin) {
+ 0 => false,
+ 1 => true,
+ _ => panic!("TODO: Handle gpio get error"),
+ }
  }
  }
 }