sdcard: Set MISO high before readblocks/writeblocks.

Originally by @peterhinch. See micropython/micropython#6007 for discussion. The summary is that on some cards (especially older Kingston ones) if the bus is shared with other SPI devices, then it seems to require that MISO is high for a few cycles before the transaction is initiated. Because CS is high, this change should otherwise be a no-op. Signed-off-by: Jim Mussared <jim.mussared@gmail.com>

Author: jimmo

micropython/drivers/storage/sdcard/sdcard.py

@@ -243,6 +243,10 @@ def write_token(self, token):
  self.spi.write(b"\xff")
 
  def readblocks(self, block_num, buf):
+ # workaround for shared bus, required for (at least) some Kingston
+ # devices, ensure MOSI is high before starting transaction
+ self.spi.write(b"\xff")
+
  nblocks = len(buf) // 512
  assert nblocks and not len(buf) % 512, "Buffer length is invalid"
  if nblocks == 1:
@@ -270,6 +274,10 @@ def readblocks(self, block_num, buf):
  raise OSError(5) # EIO
 
  def writeblocks(self, block_num, buf):
+ # workaround for shared bus, required for (at least) some Kingston
+ # devices, ensure MOSI is high before starting transaction
+ self.spi.write(b"\xff")
+
  nblocks, err = divmod(len(buf), 512)
  assert nblocks and not err, "Buffer length is invalid"
  if nblocks == 1: