This relies on setup capability provided by

https://github.com/warmcat/lws-esp32-factory

which runs from the "factory" partition on ESP32. This app is designed to run from the 2.9MB OTA partition.

This was built and tested againt esp-idf 1773770f446fb12db2c18217f09fa9d0d2febd35.

Clone and bring in the lws submodule (it's unpatched lws master)

 $ git clone git@github.com:warmcat/lws-esp32-test-server-demos.git $ git submodule update --init --recursive 

 $ make flash_ota ; make monitor 

See what IP your ESP32 got from your AP, the visit it in your browser using, eg https://192.168.2.249

If your dhcp server provides your dns, you can also reach the device using lws-serial, eg, https://lws-1234 or https://lws-1234.local

• dumb increment should be updating at ~20Hz

• mirror should let you draw in the canvas... open a second browser instance and they should be able to see each other's drawings

• close testing should work

• server info should reflect browsers open on the site dynamically

• POST tests should pass the string and upload the file if one given

• The button at the bottom should reset you into the setup / factory app

• The "War and Peace" demo should load the 4MB text from the 1.2MB gzipped zip file directly, using gzipped data to the browser.