Fix CRLF issues.

Many problems happen with git due to some machines liking CRLF at the end of lines, and others linking CR. To try to straighten this out, I'm using Unix-style LF (\n) as the line endings. To make sure your repository remains consistent, try: $ git config --global core.autocrlf input For details, see: http://help.github.com/dealing-with-lineendings/

Author: shirriff

IRremote.cpp

@@ -1,101 +1,101 @@
-/*
- * IRremote
- * Version 0.1 July, 2009
- * Copyright 2009 Ken Shirriff
- * For details, see http://arcfn.com/2009/08/multi-protocol-infrared-remote-library.htm http://arcfn.com
- *
- * Interrupt code based on NECIRrcv by Joe Knapp
- * http://www.arduino.cc/cgi-bin/yabb2/YaBB.pl?num=1210243556
- * Also influenced by http://zovirl.com/2008/11/12/building-a-universal-remote-with-an-arduino/
- */
-
-#ifndef IRremote_h
-#define IRremote_h
-
-// The following are compile-time library options.
-// If you change them, recompile the library.
-// If DEBUG is defined, a lot of debugging output will be printed during decoding.
-// TEST must be defined for the IRtest unittests to work. It will make some
-// methods virtual, which will be slightly slower, which is why it is optional.
-// #define DEBUG
-// #define TEST
-
-// Results returned from the decoder
-class decode_results {
-public:
- int decode_type; // NEC, SONY, RC5, UNKNOWN
- unsigned long value; // Decoded value
- int bits; // Number of bits in decoded value
- volatile unsigned int *rawbuf; // Raw intervals in .5 us ticks
- int rawlen; // Number of records in rawbuf.
-};
-
-// Values for decode_type
-#define NEC 1
-#define SONY 2
-#define RC5 3
-#define RC6 4
-#define DISH 5
-#define SHARP 6
-#define UNKNOWN -1
-
-// Decoded value for NEC when a repeat code is received
-#define REPEAT 0xffffffff
-
-// main class for receiving IR
-class IRrecv
-{
-public:
- IRrecv(int recvpin);
- void blink13(int blinkflag);
- int decode(decode_results *results);
- void enableIRIn();
- void resume();
-private:
- // These are called by decode
- int getRClevel(decode_results *results, int *offset, int *used, int t1);
- long decodeNEC(decode_results *results);
- long decodeSony(decode_results *results);
- long decodeRC5(decode_results *results);
- long decodeRC6(decode_results *results);
- long decodeHash(decode_results *results);
- int compare(unsigned int oldval, unsigned int newval);
-
-} 
-;
-
-// Only used for testing; can remove virtual for shorter code
-#ifdef TEST
-#define VIRTUAL virtual
-#else
-#define VIRTUAL
-#endif
-
-class IRsend
-{
-public:
- IRsend() {}
- void sendNEC(unsigned long data, int nbits);
- void sendSony(unsigned long data, int nbits);
- void sendRaw(unsigned int buf[], int len, int hz);
- void sendRC5(unsigned long data, int nbits);
- void sendRC6(unsigned long data, int nbits);
- void sendDISH(unsigned long data, int nbits);
- void sendSharp(unsigned long data, int nbits);
- // private:
- void enableIROut(int khz);
- VIRTUAL void mark(int usec);
- VIRTUAL void space(int usec);
-}
-;
-
-// Some useful constants
-
-#define USECPERTICK 50 // microseconds per clock interrupt tick
-#define RAWBUF 76 // Length of raw duration buffer
-
-// Marks tend to be 100us too long, and spaces 100us too short
-// when received due to sensor lag.
-#define MARK_EXCESS 100
-
-#endif
+/*
+ * IRremote
+ * Version 0.1 July, 2009
+ * Copyright 2009 Ken Shirriff
+ * For details, see http://arcfn.com/2009/08/multi-protocol-infrared-remote-library.htm http://arcfn.com
+ *
+ * Interrupt code based on NECIRrcv by Joe Knapp
+ * http://www.arduino.cc/cgi-bin/yabb2/YaBB.pl?num=1210243556
+ * Also influenced by http://zovirl.com/2008/11/12/building-a-universal-remote-with-an-arduino/
+ */
+
+#ifndef IRremote_h
+#define IRremote_h
+
+// The following are compile-time library options.
+// If you change them, recompile the library.
+// If DEBUG is defined, a lot of debugging output will be printed during decoding.
+// TEST must be defined for the IRtest unittests to work. It will make some
+// methods virtual, which will be slightly slower, which is why it is optional.
+// #define DEBUG
+// #define TEST
+
+// Results returned from the decoder
+class decode_results {
+public:
+ int decode_type; // NEC, SONY, RC5, UNKNOWN
+ unsigned long value; // Decoded value
+ int bits; // Number of bits in decoded value
+ volatile unsigned int *rawbuf; // Raw intervals in .5 us ticks
+ int rawlen; // Number of records in rawbuf.
+};
+
+// Values for decode_type
+#define NEC 1
+#define SONY 2
+#define RC5 3
+#define RC6 4
+#define DISH 5
+#define SHARP 6
+#define UNKNOWN -1
+
+// Decoded value for NEC when a repeat code is received
+#define REPEAT 0xffffffff
+
+// main class for receiving IR
+class IRrecv
+{
+public:
+ IRrecv(int recvpin);
+ void blink13(int blinkflag);
+ int decode(decode_results *results);
+ void enableIRIn();
+ void resume();
+private:
+ // These are called by decode
+ int getRClevel(decode_results *results, int *offset, int *used, int t1);
+ long decodeNEC(decode_results *results);
+ long decodeSony(decode_results *results);
+ long decodeRC5(decode_results *results);
+ long decodeRC6(decode_results *results);
+ long decodeHash(decode_results *results);
+ int compare(unsigned int oldval, unsigned int newval);
+
+} 
+;
+
+// Only used for testing; can remove virtual for shorter code
+#ifdef TEST
+#define VIRTUAL virtual
+#else
+#define VIRTUAL
+#endif
+
+class IRsend
+{
+public:
+ IRsend() {}
+ void sendNEC(unsigned long data, int nbits);
+ void sendSony(unsigned long data, int nbits);
+ void sendRaw(unsigned int buf[], int len, int hz);
+ void sendRC5(unsigned long data, int nbits);
+ void sendRC6(unsigned long data, int nbits);
+ void sendDISH(unsigned long data, int nbits);
+ void sendSharp(unsigned long data, int nbits);
+ // private:
+ void enableIROut(int khz);
+ VIRTUAL void mark(int usec);
+ VIRTUAL void space(int usec);
+}
+;
+
+// Some useful constants
+
+#define USECPERTICK 50 // microseconds per clock interrupt tick
+#define RAWBUF 76 // Length of raw duration buffer
+
+// Marks tend to be 100us too long, and spaces 100us too short
+// when received due to sensor lag.
+#define MARK_EXCESS 100
+
+#endif