qat: init: detect all system QAT devices

Signed-off-by: Mikko Ylinen <mikko.ylinen@intel.com>

demo/qat-autoreset.sh

@@ -1,12 +1,20 @@
 #!/usr/bin/env bash
 NODE_NAME="${NODE_NAME:-}"
 ENABLED_QAT_PF_PCIIDS=${ENABLED_QAT_PF_PCIIDS:-37c8 4940 4942 4944 4946}
-DEVS=$(for pf in $ENABLED_QAT_PF_PCIIDS; do lspci -n | grep -e "$pf" | grep -o -e "^\\S*"; done)
 
 AUTORESET_ENABLED="NONE"
 AUTORESET_ENABLED_FOUND="FALSE"
 AUTORESET_OPTIONS_LIST="on off"
 
+DEVS=""
+for DEV in $(realpath /sys/bus/pci/devices/*); do
+ for PF in $ENABLED_QAT_PF_PCIIDS; do
+ if grep -q "$PF" "$DEV"/device; then
+ DEVS="$DEV $DEVS"
+ fi
+ done
+done
+
 check_config() {
  [ -f "conf/qat.conf" ] && AUTORESET_ENABLED=$(grep "^AutoresetEnabled=" conf/qat.conf | cut -d= -f 2 | grep '\S')
  [ -f "conf/qat-$NODE_NAME.conf" ] && AUTORESET_ENABLED=$(grep "^AutoresetEnabled=" conf/qat-"$NODE_NAME".conf | cut -d= -f 2 | grep '\S')
@@ -25,9 +33,8 @@ check_config() {
 
 enable_auto_reset() {
  if [ "$AUTORESET_ENABLED_FOUND" = "TRUE" ]; then
- for dev in $DEVS; do
- devpath="/sys/bus/pci/devices/0000:$dev"
- autoreset_path="$devpath/qat/auto_reset"
+ for devpath in $DEVS; do
+ autoreset_path="$devpath"/qat/auto_reset
  if ! test -w "$autoreset_path"; then
  echo "error: $autoreset_path is not found or not writable. Check if QAT driver module is loaded. Skipping..."
  exit 1

demo/qat-init.sh

@@ -2,7 +2,6 @@
 # This script is based on qatlib's qat_init.sh
 NODE_NAME="${NODE_NAME:-}"
 ENABLED_QAT_PF_PCIIDS=${ENABLED_QAT_PF_PCIIDS:-37c8 4940 4942 4944 4946}
-DEVS=$(for pf in $ENABLED_QAT_PF_PCIIDS; do lspci -n | grep -e "$pf" | grep -o -e "^\\S*"; done)
 SERVICES_LIST="sym asym sym;asym dc sym;dc asym;dc"
 QAT_4XXX_DEVICE_PCI_ID="0x4940"
 QAT_401XX_DEVICE_PCI_ID="0x4942"
@@ -11,6 +10,15 @@ QAT_420XX_DEVICE_PCI_ID="0x4946"
 SERVICES_ENABLED="NONE"
 SERVICES_ENABLED_FOUND="FALSE"
 
+DEVS=""
+for DEV in $(realpath /sys/bus/pci/devices/*); do
+ for PF in $ENABLED_QAT_PF_PCIIDS; do
+ if grep -q "$PF" "$DEV"/device; then
+ DEVS="$DEV $DEVS"
+ fi
+ done
+done
+
 check_config() {
  [ -f "conf/qat.conf" ] && SERVICES_ENABLED=$(grep "^ServicesEnabled=" conf/qat.conf | cut -d= -f 2 | grep '\S')
  [ -f "conf/qat-$NODE_NAME.conf" ] && SERVICES_ENABLED=$(grep "^ServicesEnabled=" conf/qat-"$NODE_NAME".conf | cut -d= -f 2 | grep '\S')
@@ -29,8 +37,7 @@ check_config() {
 
 sysfs_config() {
  if [ "$SERVICES_ENABLED_FOUND" = "TRUE" ]; then
- for dev in $DEVS; do
- DEVPATH="/sys/bus/pci/devices/0000:$dev"
+ for DEVPATH in $DEVS; do
  PCI_DEV=$(cat "$DEVPATH"/device 2> /dev/null)
  if [ "$PCI_DEV" != "$QAT_4XXX_DEVICE_PCI_ID" ] && [ "$PCI_DEV" != "$QAT_401XX_DEVICE_PCI_ID" ] && [ "$PCI_DEV" != "$QAT_402XX_DEVICE_PCI_ID" ] && [ "$PCI_DEV" != "$QAT_420XX_DEVICE_PCI_ID" ]; then
  continue
@@ -45,15 +52,14 @@ sysfs_config() {
  echo "$SERVICES_ENABLED" > "$DEVPATH"/qat/cfg_services
  CURRENT_SERVICES=$(cat "$DEVPATH"/qat/cfg_services)
  fi
- echo "Device $dev configured with services: $CURRENT_SERVICES"
+ echo "Device $DEVPATH configured with services: $CURRENT_SERVICES"
  done
  fi
 }
 
 enable_sriov() {
- for dev in $DEVS; do
- DEVPATH="/sys/bus/pci/devices/0000:$dev"
- NUMVFS="$DEVPATH/sriov_numvfs"
+ for DEVPATH in $DEVS; do
+ NUMVFS="$DEVPATH"/sriov_numvfs
  if ! test -w "$NUMVFS"; then
  echo "error: $NUMVFS is not found or not writable. Check if QAT driver module is loaded"
  exit 1
@@ -65,7 +71,7 @@ enable_sriov() {
  if [ "$(cat "$NUMVFS")" -ne 0 ]; then
  echo "$DEVPATH already configured"
  else
- tee "$NUMVFS" < "$DEVPATH/sriov_totalvfs"
+ tee "$NUMVFS" < "$DEVPATH"/sriov_totalvfs
  VFDEVS=$(realpath -L "$DEVPATH"/virtfn*)
  for vfdev in $VFDEVS; do
  BSF=$(basename "$vfdev")