[FIO toup] apalis-imx8: enable SPL build

Enable SPL build by default. Signed-off-by: Igor Opaniuk <igor.opaniuk@foundries.io>

Author: igoropaniuk

configs/apalis-imx8_defconfig

@@ -1,16 +1,31 @@
 CONFIG_ARM=y
+CONFIG_SPL_SYS_ICACHE_OFF=y
+CONFIG_SPL_SYS_DCACHE_OFF=y
 CONFIG_ARCH_IMX8=y
+CONFIG_SPL_GPIO_SUPPORT=y
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SYS_TEXT_BASE=0x80020000
 CONFIG_SYS_MALLOC_F_LEN=0x8000
 CONFIG_ENV_SIZE=0x2000
 CONFIG_ENV_OFFSET=0xFFFFDE00
 CONFIG_DM_GPIO=y
+CONFIG_SPL_LOAD_IMX_CONTAINER=y
 CONFIG_BOOTAUX_RESERVED_MEM_BASE=0x88000000
 CONFIG_BOOTAUX_RESERVED_MEM_SIZE=0x08000000
 CONFIG_TARGET_APALIS_IMX8=y
+CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_EFI_PARTITION=n
+CONFIG_SPL_DOS_PARTITION=n
+CONFIG_SPL_DM_SEQ_ALIAS=y
+CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
+CONFIG_USE_TINY_PRINTF=y
 CONFIG_SNVS_SEC_SC=y
 CONFIG_NR_DRAM_BANKS=3
+CONFIG_SPL=y
 CONFIG_IMX_BOOTAUX=y
+CONFIG_SPL_TEXT_BASE=0x100000
 CONFIG_AHCI=y
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_FIT=y
@@ -19,6 +34,12 @@ CONFIG_OF_SYSTEM_SETUP=y
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/toradex/apalis-imx8/apalis-imx8-imximage.cfg"
 CONFIG_BOOTDELAY=1
 CONFIG_LOG=y
+CONFIG_SPL_BOARD_INIT=y
+# CONFIG_SPL_SYS_MALLOC_SIMPLE is not set
+CONFIG_SPL_SEPARATE_BSS=y
+CONFIG_SPL_POWER_SUPPORT=y
+CONFIG_SPL_POWER_DOMAIN=y
+CONFIG_SPL_WATCHDOG_SUPPORT=y
 CONFIG_VERSION_VARIABLE=y
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_BOARD_EARLY_INIT_F=y
@@ -39,6 +60,14 @@ CONFIG_CMD_USB=y
 CONFIG_CMD_CACHE=y
 CONFIG_CMD_UUID=y
 CONFIG_CMD_EXT4_WRITE=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_SPL_DM=y
+CONFIG_SPL_DM_USB=y
+CONFIG_SPL_CLK=y
+CONFIG_SPL_PINCTRL=y
+CONFIG_SPL_DM_REGULATOR=y
+CONFIG_SPL_DM_REGULATOR_FIXED=y
+CONFIG_SPL_TINY_MEMSET=y
 CONFIG_DEFAULT_DEVICE_TREE="fsl-imx8qm-apalis"
 CONFIG_ENV_IS_IN_MMC=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
@@ -92,6 +121,7 @@ CONFIG_DM_THERMAL=y
 CONFIG_USB=y
 CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_IMX8=y
 CONFIG_USB_CDNS3=y
 CONFIG_USB_CDNS3_GADGET=y
 CONFIG_USB_GADGET=y
@@ -103,3 +133,9 @@ CONFIG_USB_PORT_AUTO=y
 CONFIG_DM_VIDEO=y
 CONFIG_VIDEO_IMX_HDP_LOAD=y
 CONFIG_OF_LIBFDT_OVERLAY=y
+CONFIG_SPL_DM_USB_GADGET=y
+CONFIG_SPL_PHY=y
+CONFIG_SPL_USB_GADGET=y
+CONFIG_SPL_USB_SDP_SUPPORT=y
+CONFIG_SPL_SDP_USB_DEV=1
+CONFIG_SDP_LOADADDR=0x80400000