Merge pull request #1392 from arduino/main

benjamindannegard/update-tutorial-branch

Author: BenjaminDannegard

content/arduino-cloud/01.getting-started/01.iot-cloud-getting-started/iot-cloud-getting-started.md

@@ -53,7 +53,6 @@ To use the Arduino IoT Cloud, a **cloud compatible board** is required. You can
 
 The following boards connect to the Arduino IoT Cloud via Wi-Fi.
 
-- [MKR 1000 WiFi](/hardware/mkr-1000-wifi)
 - [MKR WiFi 1010](https://store.arduino.cc/arduino-mkr-wifi-1010)
 - [Nano RP2040 Connect](https://store.arduino.cc/nano-rp2040-connect)
 - [Nano 33 IoT](https://store.arduino.cc/arduino-nano-33-iot)

content/arduino-cloud/01.getting-started/02.technical-reference/iot-cloud-tech-ref.md

@@ -21,7 +21,6 @@ To use the Arduino IoT Cloud, a **cloud compatible board** is required. You can
 
 The following boards connect to the Arduino IoT Cloud via Wi-Fi.
 
-- [MKR 1000 WiFi](https://store.arduino.cc/arduino-mkr1000-wifi)
 - [MKR WiFi 1010](https://store.arduino.cc/arduino-mkr-wifi-1010)
 - [Nano RP2040 Connect](https://store.arduino.cc/nano-rp2040-connect)
 - [Nano 33 IoT](https://store.arduino.cc/arduino-nano-33-iot)

content/hacking/02.hardware/building-an-arduino-on-a-breadboard/building-an-arduino-on-a-breadboard.md

@@ -91,7 +91,7 @@ Start by connecting a 10k ohm pullup resistor to +5V from the RESET pin in order
 * Pin 8 - GND
 * Pin 22 - GND
 * Pin 21 - AREF - Analog reference pin for ADC
-* Pin 20 - AVcc - Suppply voltage for the ADC converter. Needs to be connected to power if ADC isn't being used and to power via a low-pass filter if it is (a low pass filter is a circuit that reduces noise from the power source. This example isn't using one)
+* Pin 20 - AVcc - Supply voltage for the ADC converter. Needs to be connected to power if ADC isn't being used and to power via a low-pass filter if it is (a low pass filter is a circuit that reduces noise from the power source. This example isn't using one)
 
 ![Add the Clock & Caps](assets/arduinobb_08.jpg)
 

content/hardware/01.mkr/01.boards/mkr-1000-wifi/compatibility.yml

@@ -1,6 +1,5 @@
 software:
  - arduino-ide
- - iot-cloud
  - arduino-cli
  - web-editor
 hardware:

content/hardware/01.mkr/01.boards/mkr-wifi-1010/tutorials/atmel-ice/using-an-atmel-ice-with-the-ide-v2.md

@@ -151,7 +151,7 @@ void loop() {
 }
 ```
 
-Before uploading the code to our board, we must optimize it for debugging. This can be made easily by clicking on the **Sketch** tab and then selecting the option **Optimize for Debbuging**:
+Before uploading the code to our board, we must optimize it for debugging. This can be made easily by clicking on the **Sketch** tab and then selecting the option **Optimize for Debugging**:
 
 ![The "Optimize for Debugging" option in the Arduino IDE 2](assets/ide_v2_t1_img06.png)