Merge pull request espressif#10732 from SuGlider/matter_while_serial

feat(matter): General Review - remove while(!serial) ipv6(enable) and fixes some commentaries in the code

Author: me-no-dev

libraries/Matter/examples/MatterColorLight/MatterColorLight.ino

@@ -21,6 +21,10 @@
 // Color Light Endpoint
 MatterColorLight ColorLight;
 
+// WiFi is manually set and started
+const char *ssid = "your-ssid"; // Change this to your WiFi SSID
+const char *password = "your-password"; // Change this to your WiFi password
+
 // it will keep last OnOff & HSV Color state stored, using Preferences
 Preferences matterPref;
 const char *onOffPrefKey = "OnOff";
@@ -43,10 +47,6 @@ bool button_state = false; // false = released | true = pres
 const uint32_t debouceTime = 250; // button debouncing time (ms)
 const uint32_t decommissioningTimeout = 5000; // keep the button pressed for 5s, or longer, to decommission
 
-// WiFi is manually set and started
-const char *ssid = "your-ssid"; // Change this to your WiFi SSID
-const char *password = "your-password"; // Change this to your WiFi password
-
 // Set the RGB LED Light based on the current state of the Color Light
 bool setLightState(bool state, espHsvColor_t colorHSV) {
 
@@ -76,15 +76,10 @@ void setup() {
  pinMode(ledPin, OUTPUT);
 
  Serial.begin(115200);
- while (!Serial) {
- delay(100);
- }
 
  // We start by connecting to a WiFi network
  Serial.print("Connecting to ");
  Serial.println(ssid);
- // enable IPv6
- WiFi.enableIPv6(true);
  // Manually connect to WiFi
  WiFi.begin(ssid, password);
  // Wait for connection

libraries/Matter/examples/MatterCommissionTest/MatterCommissionTest.ino

@@ -26,15 +26,10 @@ const char *password = "your-password"; // Change this to your WiFi password
 
 void setup() {
  Serial.begin(115200);
- while (!Serial) {
- delay(100);
- }
 
  // We start by connecting to a WiFi network
  Serial.print("Connecting to ");
  Serial.println(ssid);
- // enable IPv6
- WiFi.enableIPv6(true);
  // Manually connect to WiFi
  WiFi.begin(ssid, password);
  // Wait for connection

libraries/Matter/examples/MatterComposedLights/MatterComposedLights.ino

@@ -55,15 +55,10 @@ void setup() {
  pinMode(buttonPin, INPUT_PULLUP);
 
  Serial.begin(115200);
- while (!Serial) {
- delay(100);
- }
 
  // We start by connecting to a WiFi network
  Serial.print("Connecting to ");
  Serial.println(ssid);
- // enable IPv6
- WiFi.enableIPv6(true);
  // Manually connect to WiFi
  WiFi.begin(ssid, password);
  // Wait for connection

libraries/Matter/examples/MatterContactSensor/MatterContactSensor.ino

@@ -36,6 +36,10 @@
 // Matter Contact Sensor Endpoint
 MatterContactSensor ContactSensor;
 
+// WiFi is manually set and started
+const char *ssid = "your-ssid"; // Change this to your WiFi SSID
+const char *password = "your-password"; // Change this to your WiFi password
+
 // LED will be used to indicate the Contact Sensor state
 // set your board RGB LED pin here
 #ifdef RGB_BUILTIN
@@ -48,10 +52,6 @@ const uint8_t ledPin = 2; // Set your pin here if your board has not defined LE
 // set your board USER BUTTON pin here - decommissioning and Manual Contact Sensor toggle button
 const uint8_t buttonPin = BOOT_PIN; // Set your pin here. Using BOOT Button.
 
-// WiFi is manually set and started
-const char *ssid = "your-ssid"; // Change this to your WiFi SSID
-const char *password = "your-password"; // Change this to your WiFi password
-
 // Button control
 uint32_t button_time_stamp = 0; // debouncing control
 bool button_state = false; // false = released | true = pressed

libraries/Matter/examples/MatterDimmableLight/MatterDimmableLight.ino

@@ -21,6 +21,10 @@
 // Dimmable Light Endpoint
 MatterDimmableLight DimmableLight;
 
+// WiFi is manually set and started
+const char *ssid = "your-ssid"; // Change this to your WiFi SSID
+const char *password = "your-password"; // Change this to your WiFi password
+
 // it will keep last OnOff & Brightness state stored, using Preferences
 Preferences matterPref;
 const char *onOffPrefKey = "OnOff";
@@ -43,10 +47,6 @@ bool button_state = false; // false = released | true = pres
 const uint32_t debouceTime = 250; // button debouncing time (ms)
 const uint32_t decommissioningTimeout = 5000; // keep the button pressed for 5s, or longer, to decommission
 
-// WiFi is manually set and started
-const char *ssid = "your-ssid"; // Change this to your WiFi SSID
-const char *password = "your-password"; // Change this to your WiFi password
-
 // Set the RGB LED Light based on the current state of the Dimmable Light
 bool setLightState(bool state, uint8_t brightness) {
  if (state) {
@@ -72,15 +72,10 @@ void setup() {
  pinMode(ledPin, OUTPUT);
 
  Serial.begin(115200);
- while (!Serial) {
- delay(100);
- }
 
  // We start by connecting to a WiFi network
  Serial.print("Connecting to ");
  Serial.println(ssid);
- // enable IPv6
- WiFi.enableIPv6(true);
  // Manually connect to WiFi
  WiFi.begin(ssid, password);
  // Wait for connection

libraries/Matter/examples/MatterEnhancedColorLight/MatterEnhancedColorLight.ino

@@ -21,6 +21,10 @@
 // Color Light Endpoint
 MatterEnhancedColorLight EnhancedColorLight;
 
+// WiFi is manually set and started
+const char *ssid = "your-ssid"; // Change this to your WiFi SSID
+const char *password = "your-password"; // Change this to your WiFi password
+
 // It will use HSV color to control all Matter Attribute Changes
 HsvColor_t currentHSVColor = {0, 0, 0};
 
@@ -46,10 +50,6 @@ bool button_state = false; // false = released | true = pres
 const uint32_t debouceTime = 250; // button debouncing time (ms)
 const uint32_t decommissioningTimeout = 5000; // keep the button pressed for 5s, or longer, to decommission
 
-// WiFi is manually set and started
-const char *ssid = "your-ssid"; // Change this to your WiFi SSID
-const char *password = "your-password"; // Change this to your WiFi password
-
 // Set the RGB LED Light based on the current state of the Enhanced Color Light
 bool setLightState(bool state, espHsvColor_t colorHSV, uint8_t brighteness, uint16_t temperature_Mireds) {
 
@@ -80,15 +80,10 @@ void setup() {
  pinMode(ledPin, OUTPUT);
 
  Serial.begin(115200);
- while (!Serial) {
- delay(100);
- }
 
  // We start by connecting to a WiFi network
  Serial.print("Connecting to ");
  Serial.println(ssid);
- // enable IPv6
- WiFi.enableIPv6(true);
  // Manually connect to WiFi
  WiFi.begin(ssid, password);
  // Wait for connection

libraries/Matter/examples/MatterFan/MatterFan.ino

@@ -20,6 +20,10 @@
 // Fan Endpoint - On/Off control + Speed Percent Control + Fan Modes
 MatterFan Fan;
 
+// WiFi is manually set and started
+const char *ssid = "your-ssid"; // Change this to your WiFi SSID
+const char *password = "your-password"; // Change this to your WiFi password
+
 // set your board USER BUTTON pin here - used for toggling On/Off and decommission the Matter Node
 const uint8_t buttonPin = BOOT_PIN; // Set your pin here. Using BOOT Button.
 
@@ -41,10 +45,6 @@ const uint8_t dcMotorPin = 2; // Set your pin here if your board has not define
 #warning "Do not forget to set the RGB LED pin"
 #endif
 
-// WiFi is manually set and started
-const char *ssid = "your-ssid"; // Change this to your WiFi SSID
-const char *password = "your-password"; // Change this to your WiFi password
-
 void fanDCMotorDrive(bool fanState, uint8_t speedPercent) {
  // drive the Fan DC motor
  if (fanState == false) {
@@ -71,15 +71,10 @@ void setup() {
  pinMode(dcMotorPin, OUTPUT);
 
  Serial.begin(115200);
- while (!Serial) {
- delay(100);
- }
 
  // We start by connecting to a WiFi network
  Serial.print("Connecting to ");
  Serial.println(ssid);
- // enable IPv6
- WiFi.enableIPv6(true);
  // Manually connect to WiFi
  WiFi.begin(ssid, password);
  // Wait for connection

libraries/Matter/examples/MatterHumiditySensor/MatterHumiditySensor.ino

@@ -27,13 +27,13 @@
 // Matter Humidity Sensor Endpoint
 MatterHumiditySensor SimulatedHumiditySensor;
 
-// set your board USER BUTTON pin here - decommissioning button
-const uint8_t buttonPin = BOOT_PIN; // Set your pin here. Using BOOT Button.
-
 // WiFi is manually set and started
 const char *ssid = "your-ssid"; // Change this to your WiFi SSID
 const char *password = "your-password"; // Change this to your WiFi password
 
+// set your board USER BUTTON pin here - decommissioning button
+const uint8_t buttonPin = BOOT_PIN; // Set your pin here. Using BOOT Button.
+
 // Button control - decommision the Matter Node
 uint32_t button_time_stamp = 0; // debouncing control
 bool button_state = false; // false = released | true = pressed

libraries/Matter/examples/MatterMinimum/MatterMinimum.ino

@@ -28,6 +28,10 @@
 // Single On/Off Light Endpoint - at least one per node
 MatterOnOffLight OnOffLight;
 
+// WiFi is manually set and started
+const char *ssid = "your-ssid"; // Change this to your WiFi SSID
+const char *password = "your-password"; // Change this to your WiFi password
+
 // Light GPIO that can be controlled by Matter APP
 #ifdef LED_BUILTIN
 const uint8_t ledPin = LED_BUILTIN;
@@ -44,23 +48,18 @@ bool button_state = false; // false = released | true = pres
 const uint32_t decommissioningTimeout = 5000; // keep the button pressed for 5s, or longer, to decommission
 
 // Matter Protocol Endpoint (On/OFF Light) Callback
-bool matterCB(bool state) {
+bool onOffLightCallback(bool state) {
  digitalWrite(ledPin, state ? HIGH : LOW);
  // This callback must return the success state to Matter core
  return true;
 }
 
-// WiFi is manually set and started
-const char *ssid = "your-ssid"; // Change this to your WiFi SSID
-const char *password = "your-password"; // Change this to your WiFi password
-
 void setup() {
  // Initialize the USER BUTTON (Boot button) that will be used to decommission the Matter Node
  pinMode(buttonPin, INPUT_PULLUP);
  // Initialize the LED GPIO
  pinMode(ledPin, OUTPUT);
 
- WiFi.enableIPv6(true);
  // Manually connect to WiFi
  WiFi.begin(ssid, password);
  // Wait for connection
@@ -72,7 +71,7 @@ void setup() {
  OnOffLight.begin();
 
  // Associate a callback to the Matter Controller
- OnOffLight.onChange(matterCB);
+ OnOffLight.onChange(onOffLightCallback);
 
  // Matter beginning - Last step, after all EndPoints are initialized
  Matter.begin();

libraries/Matter/examples/MatterOccupancySensor/MatterOccupancySensor.ino

@@ -34,13 +34,13 @@
 // Matter Occupancy Sensor Endpoint
 MatterOccupancySensor OccupancySensor;
 
-// set your board USER BUTTON pin here - decommissioning only
-const uint8_t buttonPin = BOOT_PIN; // Set your pin here. Using BOOT Button.
-
 // WiFi is manually set and started
 const char *ssid = "your-ssid"; // Change this to your WiFi SSID
 const char *password = "your-password"; // Change this to your WiFi password
 
+// set your board USER BUTTON pin here - decommissioning only
+const uint8_t buttonPin = BOOT_PIN; // Set your pin here. Using BOOT Button.
+
 // Button control
 uint32_t button_time_stamp = 0; // debouncing control
 bool button_state = false; // false = released | true = pressed