| Age | Commit message (Collapse) | Author |
|---|
| [r=sylvain-pineau][bug=1476198][author=cypressyew]" |
| When testing jobs such as `wireless/wireless_connection_*` or `suspend/wireless_connection_after_suspend_*`, if an Ethernet cable was plugged to the device being tested, it would bias the results and provide erroneous feedback. Now, before testing wireless connections, we make sure only the connection we want to test is activated, and when the test is over, if needed, we reactivate the Ethernet connection. |
| Reduce the webcam LED test time from 10 sec to 3 sec. |
| Make the rotation more close to user behaviour, from normal to each orientation, instead of cycling through them. |
| On some NVidia cards, calling xrandr script to rotate the screen programatically may not work. Triggering screen rotation using DBUS directly is closer to what is done when the user manually modifies the rotation settings in the System Settings Display screen. We add a new script to handle this and modify the graphics rotation test job to use it. |
| Use the hardware manifest to determine touchscreen availability. |
| Use a more generic phrase 'Commence the test' to replace 'Click test button' in the test instructions |
| |
| Remove the timeout for key tests, user can end the test with ESC / Ctrl + C or click on the Exit button |
| [r=bladernr][bug=1504181][author=rodsmith]" |
| with encoding errors when checking SMART enablement status. |
| Move the uefirtvariable test from the QA test list to NON-CERT list, as we will have a dedicated one. Move the out-of-list tests (wakealarm) back to the NON-CERT list. Rename the fwts local job with generator_ prefix. |
| |
| Add the following jobs: - power-management/suspend-30-cycles-log-check-with-reboots - power-management/suspend-30-cycle-log-attach-with-reboots - power-management/suspend-30-cycles-time-check-with-reboots Modifies the `pm_test` script to include `sleep_test` output in its logs in order to easily access the data needed by `sleep_time_check` to compute average times. `sleep_time_check` has been updated to take into account more than one sleep/resume times (the mean value is computed and returned). |
| [r=sylvain-pineau][bug=1331302,1341769,1347120,1382321,1383447,1387782,1387843,1388055,1388747,1389253,1399481,1400646,1403933,1406719,1410501,1428615,1451343,1451541][author=checkbox-dev]" |
| |
| |
| lp:~sylvain-pineau/checkbox/whitelist-migration-to-testplan/ by tarmac [r=zyga][bug=1498811][author=sylvain-pineau]" |
| Since checkbox sru now uses plainbox SessionAssistant, all local jobs have to be included in the test plan bootstrap_include section. Fixes: https://bugs.launchpad.net/plainbox-provider-checkbox/+bug/1498811 |
| |
| [r=bladernr][bug=][author=rodsmith]" |
| |
| The usb3 superspeed performance test is using the exactly same command with usb3 storage test, there is no need to run it twice. |
| The pulse-active-port-change script was using pairs (sink-source-name, sink-source-active-port) to detect changes when plugging a microphone or a headset. This was not enough because in some cases (on desktops especially) the pair would remain the same, which would fail the test although the feature actually worked. By adding the availability flag, we make sure any mic/headphone plugged will be detected properly. |
| |
| [r=zyga][bug=1274657][author=cypressyew]" |
| --cpu_load_fail_threshold |
| and changed to dashes in --cpu-load-fail-threshold, as per Jeff's suggestions |
| add multi_iperf3_nic test to use these new features |
| It looks like X crashes when trying to re-enable Unity Shell Compiz plugin, after the QML touch test is run. In order to avoid that, we add a sleep command just before re-enabling Unity Shell Compiz plugin. |
| Remove the outdated obex_send script, which has already been replaced by bluetooth_test script, also remove those corresponding test cases. |
| This patch adds category ids to all jobs in the checkbox provider (almost all jobs) so that users can select the category they want to test in checkbox-converged. local jobs are not getting a category id as those will be run during bootstrapping. Legacy jobs in install, panel-reboot, panel-control and server-services are also kept uncategorised. |
| [r=zyga][bug=1471945][author=cypressyew]" |
| Add an .gz extension to those fwts attachment jobs that runs with gzip command, make user know what kind of attachment they're decoding. |
| |
| |
| Move the DEBUG information to after the ERROR message, make it less confusing for the tester. |
| [r=sylvain-pineau,bladernr][bug=1486820][author=cypressyew]" |
| [r=bladernr][bug=][author=rodsmith]" |
| |
| alternative to client or server test type |
| Divide the CERT tests into QA and HWE tests, so we don't need to split the log in fwts_test, we can create different logs with different jobs. |
| Add the FWTS HWE attachment job for server provider, as it's using a different log filename |
| |
| fwts_test called without any parameter will launch all the certification tests. In that context, all fwts test outputs will be grouped into a single log file. This is where we need to split hwe tests into a second log file. But there's also a local jobs creating jobs for all tests returned by fwts_test --list. Here not only cert tests will be returned but all the tests defined in the script (aka advanced tests). This execution mode is meant to be used by CDTS where we wanted to have a job per fwts test and thus a log per test. |
| ethernet/multi_nic that are no longer used |
| Add the post-suspend clicking test. |
| |
| |
| engineering-sample status without the other checks, and created a new job definition to use this test. |
