3.7.0-1 (patches unapplied)import/3.7.0-1ubuntu/utopic

Imported using git-ubuntu import.

1 files changed, 923 insertions, 0 deletions

diff --git a/man/mstflint.1 b/man/mstflint.1
new file mode 100644
index 0000000..f7289a7
--- /dev/null
+++ b/man/mstflint.1
@@ -0,0 +1,923 @@
+.\"Text automatically generated by txt2man
+.TH mstflint 3.6.0 "December 2013" "" ""
+.SH NAME
+\fBmstflint \fP- Mellanox Technologies Firmware Update Tool
+.SH SYNOPSIS
+.nf
+.fam C
+ \fBmstlint\fP [\fIOPTIONS\fP] <command> [\fIParameters\fP]
+ [\fB-d\fP|\fB--device\fP <device>] [\fB--guid\fP <GUID>]
+ [\fB--guids\fP <GUIDS\.\.\.>] [\fB--mac\fP <MAC>]
+ [\fB--macs\fP <MACs\.\.\.>] [\fB--uid\fP <UID>]
+ [\fB--uids\fP <UIDs\.\.\.>] [\fB--blank_guids\fP]
+ [\fB--clear_semaphore\fP] [\fB-h\fP|\fB--help\fP] [\fB--hh\fP]
+ [\fB-i\fP|\fB--image\fP <image>] [\fB--qq\fP] [\fB--nofs\fP]
+ [\fB--allow_psid_change\fP] [\fB--allow_rom_change\fP]
+ [\fB--override_cache_replacement\fP] [\fB--no_flash_verify\fP]
+ [\fB-s\fP|\fB--silent\fP] [\fB-y\fP|\fB--yes\fP] [\fB--no\fP] [\fB--vsd\fP <string>]
+ [\fB--use_image_ps\fP] [\fB--use_image_guids\fP]
+ [\fB--use_image_rom\fP] [\fB--dual_image\fP]
+ [\fB--striped_image\fP] [\fB--banks\fP <bank>]
+ [\fB--log\fP <log_file>] [\fB--flash_params\fP <type, log2size, num_of_flashes>]
+ [\fB-v\fP|\fB--version\fP] 
+.fam T
+.fi
+.fam T
+.fi
+.SH DESCRIPTION
+\fBmstflint\fP [\fIOPTIONS\fP] <command> [\fIParameters\fP]
+mstflint is a FW (firmware) burning and flash memory operations tool for
+Mellanox Infiniband HCAs, Ethernet NIC cards, and switch devices.
+.SH OPTIONS
+\fBmstflint\fP [\fIOPTIONS\fP] <command> [\fIParameters\fP]
+.RS
+.TP
+.B
+\fB-d\fP|\fB--device\fP <device>
+: Device flash is connected to.
+Commands affected: all
+.TP
+.B
+\fB--guid\fP <GUID>
+: GUID base value. 4 GUIDs
+are automatically assigned to the following 
+values:
+.RS
+.TP
+.B
+guid
+-> node GUID
+guid+1 -> port1
+guid+2 -> port2
+guid+3 -> system image GUID.
+.PP
+Note: port2 guid will be assigned even 
+for a
+single port HCA - The HCA ignores this value.
+.PP
+Commands affected: burn, sg
+.RE
+.TP
+.B
+\fB--guids\fP <GUIDS\.\.\.>
+: 4 GUIDs must be specified here.
+The specified GUIDs are assigned
+to the following fields, repectively:
+node, port1, port2 and system image GUID.
+.RS
+.PP
+Note: port2 guid must be specified even 
+for a
+single port HCA - The HCA ignores this value.
+It can be set to 0x0.
+.PP
+Commands affected: burn, sg
+.RE
+.TP
+.B
+\fB--mac\fP <MAC>
+: MAC address base value. 2 MACs
+are automatically assigned to the
+following values:
+.RS
+.TP
+.B
+mac
+-> port1
+.TP
+.B
+mac+1
+-> port2
+.PP
+Commands affected: burn, sg
+.RE
+.TP
+.B
+\fB--macs\fP <MACs\.\.\.>
+: 2 MACs must be specified here.
+The specified MACs are assigned
+to port1, port2, repectively.
+Commands affected: burn, sg
+.RS
+.PP
+Note: \fB-mac\fP/\fB-macs\fP flags are applicable only 
+for Mellanox
+Technologies ethernet products.
+.RE
+.TP
+.B
+\fB--uid\fP <UID>
+: BridgeX only. Derive and set the device UIDs 
+(GUIDs, MACs, WWNs).
+UIDs are derived from the given base UID 
+according to Mellanox Methodology
+Commands affected: burn, sg
+.TP
+.B
+\fB--uids\fP <UIDs\.\.\.>
+: BridgeX only. 29 space separated UIDs must 
+be specified here.
+The specified UIDs are assigned to the following 
+fields, repectively:
+.RS
+G0-MAC-PI0 G0-MAC-PI1 G0-MAC-PI2 G0-MAC-PE0
+G0-MAC-PE1 G0-MAC-PE2 G0-MAC-PE3 G0-FC-WWPN-P0
+G0-FC-WWPN-P1 G0-FC-WWPN-P2 G0-FC-WWPN-P3 G0-IB-NODE-GUID
+G0-IB-PORT-GUID G0-FC-WWNN G1-MAC-PI0 G1-MAC-PI1
+G1-MAC-PI2 G1-MAC-PE0 G1-MAC-PE1 G1-MAC-PE2
+G1-MAC-PE3 G1-FC-WWPN-P0 G1-FC-WWPN-P1 G1-FC-WWPN-P2
+G1-FC-WWPN-P3 G1-IB-NODE-GUID G1-IB-PORT-GUID G1-FC-WWNN
+IB-SYSTEM-GUID
+Commands affected: 
+burn, sg
+.RE
+.TP
+.B
+\fB--blank_guids\fP
+: Burn the image with blank GUIDs and MACs 
+(where
+applicable). These values can be 
+set later using
+the "sg" command (see details below).
+.RS
+.PP
+Commands affected: burn
+.RE
+.TP
+.B
+\fB--clear_semaphore\fP
+: Force clear the flash semaphore on the device.
+No command is allowed when this flag is 
+used.
+NOTE: May result in system instability 
+or flash
+corruption if the device or another
+application is currently using the flash.
+Exercise caution.
+.TP
+.B
+\fB-h\fP|\fB--help\fP
+: Prints this message and exits
+.TP
+.B
+\fB--hh\fP
+: Prints extended command help
+.TP
+.B
+\fB-i\fP|\fB--image\fP <image>
+: Binary image file.
+Commands affected: burn, verify
+.TP
+.B
+\fB--qq\fP
+: Run a quick query. When specified, mstflint 
+will not perform full
+image integrity checks during the query 
+operation. This may shorten
+execution time when running over slow interfaces 
+(e.g., I2C, MTUSB-1).
+Commands affected: burn, query
+.TP
+.B
+\fB--nofs\fP
+: Burn image in a non failsafe manner.
+.TP
+.B
+\fB--allow_psid_change\fP
+: Allow burning a FW image with a different 
+PSID (Parameter Set ID)than the
+one currently on flash. Note that changing 
+a PSID may cause the device to
+malfunction. Use only if you know what you 
+are doing
+.TP
+.B
+\fB--allow_rom_change\fP
+: Allow burning/removing a ROM to/from FW image 
+when product version is present.
+Use only if you know what you are doing
+.TP
+.B
+\fB--override_cache_replacement\fP
+: On SwitchX/ConnectIB devices:
+Allow accessing the flash even if the cache 
+replacement mode is enabled.
+NOTE: This flag is intended for advanced 
+users only.
+Running in this mode may cause the firmware 
+to hang.
+.TP
+.B
+\fB--no_flash_verify\fP
+: Do not verify each write on the flash.
+.TP
+.B
+\fB-s\fP|\fB--silent\fP
+: Do not print burn progress flyer.
+Commands affected: burn
+.TP
+.B
+\fB-y\fP|\fB--yes\fP
+: Non interactive mode - assume answer
+"yes" to all questions.
+Commands affected: all
+.TP
+.B
+\fB--no\fP
+: Non interactive mode - assume answer
+"no" to all questions.
+Commands affected: all
+.TP
+.B
+\fB--vsd\fP <string>
+: Write this string, of up to 208 characters, 
+to VSD when burn.
+.TP
+.B
+\fB--use_image_ps\fP
+: Burn vsd as appears in the given image - 
+do not keep existing VSD on flash.
+Commands affected: burn
+.TP
+.B
+\fB--use_image_guids\fP
+: Burn (guids/uids/macs) as appears in the 
+given image.
+Commands affected: burn
+.TP
+.B
+\fB--use_image_rom\fP
+: Do not save the ROM which exists in the device.
+Commands affected: burn
+.TP
+.B
+\fB--dual_image\fP
+: Make the burn process burn two images on 
+flash (previously default algorithm). Currentdefault 
+failsafe burn process burns a single image 
+(in alternating locations).
+Commands affected: burn
+.TP
+.B
+\fB--striped_image\fP
+: Use this flag to indicate that the given 
+image file is in a "striped image" format.
+Commands affected: query verify
+.TP
+.B
+\fB--banks\fP <bank>
+: Set the number of attached flash devices 
+(banks)
+.TP
+.B
+\fB--log\fP <log_file>
+: Print the burning status to the specified 
+log file
+\fB--flash_params\fP <type, log2size, num_of_flashes>: Use the given parameters to access the flash 
+instead of reading them from the flash.
+Supported parameters:
+Type: The type of the flash, such as: M25PXxx, 
+M25Pxx, N25Q0XX, SST25VFxx, W25QxxBV, W25Xxx, 
+AT25DFxxx, S25FLXXXP.
+log2size: The log2 of the flash size.num_of_flashes: 
+the number of the flashes connected to the 
+device.
+.TP
+.B
+\fB-v\fP|\fB--version\fP
+: Version info.
+.RE
+.RE
+.PP
+.SH
+COMMANDS SUMMARY:
+.RS
+.TP
+.B
+burn|b
+: Burn flash
+.TP
+.B
+query|q [full]
+ : Query misc. flash/firmware characteristics, use "full"
+to get more information.
+.TP
+.B
+verify|v [showitoc]
+ : Verify entire flash, use "showitoc" to see ITOC headers
+in FS3 image only.
+.TP
+.B
+swreset
+ : SW reset the target un-managed switch device. This command
+is supported only in the In-Band access method.
+.TP
+.B
+brom
+<ROM-file> : Burn the specified ROM file on the flash.
+.TP
+.B
+drom
+ : Remove the ROM section from the flash.
+.TP
+.B
+rrom
+<out-file> : Read the ROM section from the flash.
+.TP
+.B
+bb
+: Burn Block - Burns the given image as is. No checks are done.
+.TP
+.B
+sg
+[nocrc] : Set GUIDs.
+.TP
+.B
+smg
+: Set manufacture GUIDs (For FS3 image only).
+.TP
+.B
+set_vpd
+[vpd file] : Set read-only VPD (For FS3 image only).
+.TP
+.B
+sv
+: Set the VSD.
+.TP
+.B
+ri
+<out-file> : Read the fw image on the flash.
+.TP
+.B
+dc
+[out-file] : Dump Configuration: print fw configuration file for the given image.
+.TP
+.B
+dh
+[out-file] : Dump Hash: dump the hash if it is integrated in the FW image
+.TP
+.B
+set_key
+[key] : Set/Update the HW access key which is used to enable/disable access to HW.
+The key can be provided in the command line or interactively typed after
+the command is given
+NOTE: The new key is activated only after the device is reset.
+.TP
+.B
+hw_access
+<enable|disable> [key] : Enable/disable the access to the HW.
+The key can be provided in the command line or interactively typed after
+the command is given
+.TP
+.B
+hw
+query : Query HW info and flash attributes.
+.TP
+.B
+erase|e <addr>
+: Erases sector.
+.TP
+.B
+rw
+<addr> : Read one dword from flash
+.TP
+.B
+ww
+<addr> <data> : Write one dword to flash
+.TP
+.B
+wwne
+<addr> <data> : Write one dword to flash without sector erase
+.TP
+.B
+wbne
+<addr> <size> <data \.\.\.> : Write a data block to flash without sector erase.
+.TP
+.B
+wb
+<data-file> <addr> : Write a data block to flash.
+.TP
+.B
+rb
+<addr> <size> [out-file] : Read a data block from flash
+.TP
+.B
+qrom
+ : query rom in a given image.
+.RE
+.PP
+
+.RE
+.PP
+.SH
+COMMANDS DESCRIPTION:
+.RS
+.SS
+
+.TP
+.B
+\fIName\fP: burn
+.IP
+\fIDescription\fP: Burn flash. Performs failsafe FW update from a raw binary image.
+.IP
+\fICommand\fP: burn|b
+.IP
+\fIParameters\fP: None
+.IP
+\fIExamples\fP:
+.IP \(bu 4
+mstflint \fB-d\fP 03:00.0 \fB-i\fP image1.bin burn
+.IP \(bu 4
+mstflint \fB-d\fP mlx4_0 \fB-guid\fP 0x2c9000100d050 \fB-i\fP image1.bin b
+
+."***************************************************************************************
+
+.RE
+.TP
+.B
+\fIName\fP: query
+.IP
+\fIDescription\fP: Query miscellaneous FW and flash parameters. 
+.IP
+Display FW Version, GUIDs, PSID, and other info.
+.IP
+\fICommand\fP: query|q [full]
+.IP
+\fIParameters\fP: None
+.IP
+\fIExamples\fP:
+.IP \(bu 4
+mstflint \fB-d\fP 03:00.0 query
+
+."***************************************************************************************
+
+.RE
+.TP
+.B
+\fIName\fP: verify
+.IP
+\fIDescription\fP: Verify entire flash.
+.IP
+\fICommand\fP: verify|v [showitoc]
+.IP
+\fIParameters\fP: None
+.IP
+\fIExamples\fP:
+.IP \(bu 4
+mstflint \fB-d\fP 03:00.0 v
+
+."***************************************************************************************
+
+.RE
+.TP
+.B
+\fIName\fP: swreset
+.IP
+\fIDescription\fP: SW reset the target un-managed switch device. 
+.IP
+This command is supported only in the In-Band access method.
+.IP
+\fICommand\fP: swreset
+.IP
+\fIParameters\fP: None
+.IP
+\fIExamples\fP: None
+
+."***************************************************************************************
+.RE
+.TP
+.B
+\fIName\fP: brom
+.IP
+\fIDescription\fP: Burn the specified exp-ROM on the flash.
+.IP
+\fICommand\fP: brom <ROM-file>
+.IP
+\fIParameters\fP: file: The exp-ROM file.
+.IP
+\fIExamples\fP:
+.IP \(bu 4
+mstflint \fB-d\fP 03:00.0 brom exp-rom.rom
+
+."***************************************************************************************
+
+.RE
+.TP
+.B
+\fIName\fP: drom
+.IP
+\fIDescription\fP: Remove the exp-ROM from the flash if it is existing.
+.IP
+\fICommand\fP: drom
+.IP
+\fIParameters\fP: None
+.IP
+\fIExamples\fP:
+.IP \(bu 4
+mstflint \fB-d\fP 03:00.0 drom
+
+."***************************************************************************************
+
+.RE
+.TP
+.B
+\fIName\fP: rrom
+.IP
+\fIDescription\fP: Read the exp-ROM from the flash if it is existing.
+.IP
+\fICommand\fP: rrom <out-file>
+.IP
+\fIParameters\fP: file: filename to write the exp-ROM to.
+.IP
+\fIExamples\fP:
+.IP \(bu 4
+mstflint \fB-d\fP 03:00.0 rrom exp-rom.rom
+
+."***************************************************************************************
+
+.RE
+.TP
+.B
+\fIName\fP: bb
+.IP
+\fIDescription\fP: Burns entire flash verbatim from raw binary image. No checks are done on the flash or
+.IP
+on the given image file. No fields (such as VSD or Guids) are read from flash.
+.IP
+\fICommand\fP: bb
+.IP
+\fIParameters\fP: None
+.IP
+\fIExamples\fP:
+.IP \(bu 4
+mstflint \fB-d\fP 03:00.0 \fB-i\fP image1.bin bb
+
+."***************************************************************************************
+
+.RE
+.TP
+.B
+\fIName\fP: sg
+.IP
+\fIDescription\fP: Set GUIDs/MACs/UIDs in the given device/image.
+.IP
+Use \fB-guid\fP(s), \fB-mac\fP(s) and \fB-uid\fP(s) flags to set the desired values.
+.IP
+- On pre-ConnectX devices, the sg command is used in production to apply GUIDs/MACs values
+.IP
+to cards that were pre-burnt with blank GUIDs. It is not meant for use in field.
+.IP 
+On 4th generation devices, this command can operate on both image file and image on flash.
+.IP
+If the GUIDs/MACs/UIDs in the image on flash are non-blank,
+.IP
+mstflint will re-burn the current image using the given GUIDs/MACs/UIDs.
+.IP
+\fICommand\fP: sg [nocrc]
+.IP
+\fIParameters\fP:
+.IP
+nocrc: (optional) When specified the mstflint would not update
+.IP
+the full image crc after changing the guids
+.IP
+\fIExamples\fP:
+.IP \(bu 4
+mstflint \fB-d\fP 03:00.0 \fB-guid\fP 0x0002c9000100d050 sg
+
+."***************************************************************************************
+
+.RE
+.TP
+.B
+\fIName\fP: smg
+.IP
+\fIDescription\fP: Set manufacture GUID, Set manufacture GUIDs in the given FS3 image.
+.IP
+Use \fB-uid\fP flag to set the desired GUIDs.
+.IP
+\fICommand\fP: smg
+.IP
+\fIParameters\fP: None
+.IP
+\fIExamples\fP:
+.IP \(bu 4
+mstflint \fB-i\fP fw_image.bin \fB-uid\fP 0x0002c9000100d050 smg
+
+."***************************************************************************************
+
+.RE
+.TP
+.B
+\fIName\fP: set vpd
+.IP
+\fIDescription\fP: Set Read-only VPD, Set VPD in the given FS3 image.
+.IP
+\fICommand\fP: set_vpd [vpd file]
+.IP
+\fIParameters\fP: vpd file: bin file containing the vpd data
+.IP
+\fIExamples\fP:
+.IP \(bu 4
+mstflint \fB-i\fP fw_image.bin set_vpd vpd.bin
+
+."***************************************************************************************
+
+.RE
+.TP
+.b
+\fIName\fP: sv
+.IP
+\fIDescription\fP: Set VSD in the given device/image.
+.IP
+Use \fB-vsd\fP flag to set the desired VSD string.
+.IP
+\fICommand\fP: sv
+.IP
+\fIParameters\fP: None
+.IP
+\fIExamples\fP: 
+.IP \(bu 4
+mstflint \fB-d\fP 03:00.0 \fB-vsd\fP VSD_STRING sv
+
+."***************************************************************************************
+
+.RE
+.TP
+.B
+\fIName\fP: ri
+.IP
+\fIDescription\fP: Read the FW image from flash and write it to a file.
+.IP
+\fICommand\fP: ri <out-file>
+.IP
+\fIParameters\fP: file: filename to write the image to (raw binary).
+.IP
+\fIExamples\fP:
+.IP \(bu 4
+mstflint \fB-d\fP 03:00.0 ri file.bin
+
+."***************************************************************************************
+
+.RE
+.TP
+.B
+\fIName\fP: dc
+.IP
+\fIDescription\fP:Print (to screen or to a file) the FW configuration text file used by the image generation process.
+.IP
+This command would fail if the image does not contain a FW configuration section. Existence of this
+.IP
+section depends on the version of the image generation tool.
+.IP
+\fICommand\fP: dc [out-file]
+.IP
+\fIParameters\fP: file: (optional) filename to write the dumped configuration to. If not given, the data is printed to screen.
+.IP
+\fIExamples\fP:
+.IP \(bu 4
+mstflint \fB-d\fP 03:00.0 dc
+
+."***************************************************************************************
+
+.RE
+.TP
+.B
+\fIName\fP: dh
+\fIDescription\fP: Print (to screen or to a file) the HASH text file used by the FW.
+.IP
+This command would fail if the image does not contain a Hash file.
+.IP
+\fICommand\fP: dh [out-file]
+.IP
+\fIParameters\fP: file - (optional) filename to write the dumped tracer hash file to. If not given, the data is printed to screen.
+.IP
+\fIExamples\fP:
+.IP \(bu 4
+mstflint \fB-d\fP 03:00.0 dh hash.csv
+
+."***************************************************************************************
+
+.RE
+.TP
+.B
+\fIName\fP: set_key
+.IP
+\fIDescription\fP: Set/Update the HW access key which is used to enable/disable access to HW.
+.IP
+\fICommand\fP: set_key [key]
+.IP
+\fIParameters\fP: key: (optional) The new key you intend to set (in hex).
+.IP
+\fIExamples\fP:
+.IP \(bu 4
+mstflint \fB-d\fP 03:00.0 set_key 1234deaf5678
+
+."***************************************************************************************
+
+.RE
+.TP
+.B
+\fIName\fP: hw_access
+.IP
+\fIDescription\fP: Enable/disable the access to the HW.
+.IP
+\fICommand\fP: hw_access <enable|disable> [key]
+.IP
+\fIParameters\fP: <enable/disable>: Specify if you intend to disable or enable the HW access.
+.IP
+You will be asked to type a key when you try to enable HW access.
+.IP
+.B
+key: (optional) The key you intend to use for enabling the HW access.
+.IP
+\fIExamples\fP:
+.IP \(bu 4
+mstflint \fB-d\fP 03:00.0 hw_access enable
+
+."***************************************************************************************
+
+.RE
+.TP
+.B
+\fIName\fP: hw
+.IP
+\fIDescription\fP: Access HW info and flash attributes.
+.IP
+\fICommand\fP: hw query
+.IP
+\fIParameters\fP: query: query HW info
+.IP
+\fIExample\fP:
+.IP \(bu 4
+mstflint \fB-d\fP 03:00.0 hw query
+
+."***************************************************************************************
+
+.RE
+.TP
+.B
+\fIName\fP: erase
+.IP
+\fIDescription\fP: Erases a sector that contains specified address.
+.IP
+\fICommand\fP: erase|e <addr>
+.IP
+\fIParameters\fP: addr - address of word in sector that you want to erase.
+.IP
+\fIExamples\fP:
+.IP \(bu 4
+mstflint \fB-d\fP 03:00.0 erase 0x10000
+
+."***************************************************************************************
+
+.RE
+.TP
+.B
+\fIName\fP: rw
+.IP
+\fIDescription\fP: Read one dword from flash.
+.IP
+\fICommand\fP: rw <addr>
+.IP
+\fIParameters\fP: addr - address of word to read
+.IP
+\fIExamples\fP:
+.IP \(bu 4
+mstflint \fB-d\fP 03:00.0 rw 0x20
+
+."***************************************************************************************
+
+.RE
+.TP
+.B
+\fIName\fP: ww
+.IP
+\fIDescription\fP: Write one dword to flash.
+.IP
+Note that the utility will read an entire flash sector,
+.IP
+modify one word and write the sector back. This may take a few seconds.
+.IP
+\fICommand\fP: ww <addr> <data>
+.IP
+\fIParameters\fP: addr - address of word
+.IP
+data - value of word
+.IP
+\fIExamples\fP:
+.IP \(bu 4
+mstflint \fB-d\fP 03:00.0 ww 0x10008 0x5a445a44
+
+."***************************************************************************************
+
+.RE
+.TP
+.B
+\fIName\fP: wwne
+.IP
+\fIDescription\fP: Write one dword to flash without sector erase.
+.IP
+Note that the result of operation is undefined and depends
+.IP
+on flash type. Usually "bitwise AND" (&) between specified
+.IP
+word and previous flash contents will be written to specified address.
+.IP
+\fICommand\fP: wwne <addr> <data>
+.IP
+\fIParameters\fP:
+.IP
+addr - address of word
+.IP
+data - value of word
+.IP
+\fIExamples\fP:
+.IP \(bu 4
+mstflint \fB-d\fP 03:00.0 wwne 0x10008 0x5a445a44
+
+."***************************************************************************************
+
+.RE
+.TP
+.B
+\fIName\fP: wbne
+.IP
+\fIDescription\fP: Write a block of data to the flash without erasing.
+.IP
+\fICommand\fP: wbne <addr> <size> <data \.\.\.>
+.IP
+\fIParameters\fP: addr - address of block
+.IP
+size - size of data to write in bytes
+.IP
+data - data to write - space seperated dwords
+.IP
+Examples:
+.IP \(bu 4
+mstflint \fB-d\fP 03:00.0 wbne 0x10000 12 0x30000 0x76800 0x5a445a44
+
+."***************************************************************************************
+
+.RE
+.TP
+.B
+\fIName\fP: wb
+.IP
+\fIDescription\fP: Write a block of data to the flash.
+.IP
+\fICommand\fP: wb <data-file> <addr>
+.IP
+\fIParameters\fP: data-file - file that contains the data to be written
+.IP
+addr - address to write the block to
+.IP
+\fIExamples\fP:
+.IP \(bu 4
+mstflint \fB-d\fP 03:00.0 wb myData.bin 0x0
+
+."***************************************************************************************
+
+.RE
+.TP
+.B
+\fIName\fP: rb
+.IP
+\fIDescription\fP:
+.IP
+Read a data block from the flash and write it to a file or to screen.
+.IP
+\fICommand\fP: rb <addr> <size> [out-file]
+.IP
+\fIParameters\fP: addr - address of block
+.IP
+size - size of data to read in bytes
+.IP
+file - filename to write the block (raw binary). If not given, the data is printed to screen.
+\fIExamples\fP:
+.IP \(bu 4
+mstflint \fB-d\fP 03:00.0 rb 0x10000 100 file.bin
+
+."***************************************************************************************
+
+.RE
+.TP
+.B
+\fIName\fP: qrom
+.IP
+\fIDescription\fP: query rom in a given image.
+.IP
+\fI'Command\fP: qrom
+.IP
+\fIParameters\fP: None
+.IP
+\fIExamples\fP:
+.IP \(bu 4
+mstflint \fB-i\fP fw_image.bin qrom 
+
+
+.RE
+Return values:
+0 - Successful completion
+1 - An error has occurred
+7 - For burn command - FW already updated - burn was aborted.