Change the security groups for your Amazon EC2 instance - Amazon Elastic Compute Cloud
Add or remove security groupsConfigure security group rules

Change the security groups for your Amazon EC2 instance

You can specify security groups for your Amazon EC2 instances when you launch them. After you launch an instance, you can add or remove security groups. You can also add, remove, or edit security group rules for associated security groups at any time.

Security groups are associated with network interfaces. Adding or removing security groups changes the security groups associated with the primary network interface. You can also change the security groups associated with any secondary network interfaces. For more information, see Modify network interface attributes.

Add or remove security groups

After you launch an instance, you can add or remove security groups from the list of associated security groups. When you associate multiple security groups with an instance, the rules from each security group are effectively aggregated to create one set of rules. Amazon EC2 uses this set of rules to determine whether to allow traffic.

Requirements

  • The instance must be in the running or stopped state.

Console
To change the security groups for an instance

  1. Open the Amazon EC2 console at https://console.aws.amazon.com/ec2/.

  2. In the navigation pane, choose Instances.

  3. Select your instance, and then choose Actions, Security, Change security groups.

  4. For Associated security groups, select a security group from the list and choose Add security group.

    To remove an already associated security group, choose Remove for that security group.

  5. Choose Save.

AWS CLI
To change the security groups for an instance

Use the following modify-instance-attribute command.

aws ec2 modify-instance-attribute \ --instance-id i-1234567890abcdef0 \ --groups sg-1234567890abcdef0
PowerShell
To change the security groups for an instance

Use the Edit-EC2InstanceAttribute cmdlet.

Edit-EC2InstanceAttribute ` -InstanceId i-1234567890abcdef0 ` -Group sg-1234567890abcdef0

Configure security group rules

After you create a security group, you can add, update, and delete its security group rules. When you add, update, or delete a rule, the change is automatically applied to the resources that are associated with the security group.

For examples of rules that you can add to a security group, see Security group rules for different use cases.

Required permissions

Before you begin, ensure that you have the required permissions. For more information, see Example: Work with security groups.

Protocols and ports

  • With the console, when you select a predefined type, Protocol and Port range are specified for you. To enter a port range, you must select one of the following custom types: Custom TCP or Custom UDP.

  • With the AWS CLI, you can add a single rule with a single port using the --protocol and --port options. To add multiple rules, or a rule with a port range, use the --ip-permissions option instead.

Sources and destinations

  • With the console, you can specify the following as sources for inbound rules or destinations for outbound rules:

    • Custom – An IPv4 CIDR block, an IPv6 CIDR block, a security group, or a prefix list.

    • Anywhere-IPv4 – The 0.0.0.0/0 IPv4 CIDR block.

    • Anywhere-IPv6 – The ::/0 IPv6 CIDR block.

    • My IP – The public IPv4 address of your local computer.

  • With the AWS CLI, you can specify an IPv4 CIDR block using the --cidr option or a security group using the --source-group option. To specify a prefix list or an IPv6 CIDR block, use the --ip-permissions option.

Warning

If you add inbound rules for ports 22 (SSH) or 3389 (RDP), we strongly recommend that you authorize only the specific IP address or range of addresses that need access to your instances. If you choose Anywhere-IPv4, you allow traffic from all IPv4 addresses to access your instances using the specified protocol. If you choose Anywhere-IPv6, you allow traffic from all IPv6 addresses to access your instances using the specified protocol.

Console
To configure security group rules

  1. Open the Amazon EC2 console at https://console.aws.amazon.com/ec2/.

  2. In the navigation pane, choose Security Groups.

  3. Select the security group.

  4. To edit the inbound rules, choose Edit inbound rules from Actions or the Inbound rules tab.

    1. To add a rule, choose Add rule and enter the type, protocol, port, and source for the rule.

      If the type is TCP or UDP, you must enter the port range to allow. For custom ICMP, you must choose the ICMP type name from Protocol, and, if applicable, the code name from Port range. For any other type, the protocol and port range are configured for you.

    2. To update a rule, change its protocol, description, and source as needed. However, you can't change the source type. For example, if the source is an IPv4 CIDR block, you can't specify an IPv6 CIDR block, a prefix list, or a security group.

    3. To delete a rule, choose its Delete button.

  5. To edit the outbound rules, choose Edit outbound rules from Actions or the Outbound rules tab.

    1. To add a rule, choose Add rule and enter the type, protocol, port, and destination for the rule. You can also enter an optional description.

      If the type is TCP or UDP, you must enter the port range to allow. For custom ICMP, you must choose the ICMP type name from Protocol, and, if applicable, the code name from Port range. For any other type, the protocol and port range are configured for you.

    2. To update a rule, change its protocol, description, and source as needed. However, you can't change the source type. For example, if the source is an IPv4 CIDR block, you can't specify an IPv6 CIDR block, a prefix list, or a security group.

    3. To delete a rule, choose its Delete button.

  6. Choose Save rules.

AWS CLI
To add security group rules

Use the authorize-security-group-ingress command to add inbound rules. The following example allows inbound SSH traffic from the CIDR blocks in the specified prefix list.

aws ec2 authorize-security-group-ingress \ --group-id sg-1234567890abcdef0 \ --ip-permissions 'IpProtocol=tcp,FromPort=22,ToPort=22,PrefixListIds=[{PrefixListId=pl-f8a6439156EXAMPLE}]'

Use the authorize-security-group-egress command to add outbound rules. The following example allows outbound TCP traffic on port 80 to instances with the specified security group.

aws ec2 authorize-security-group-egress \ --group-id sg-1234567890abcdef0 \ --ip-permissions 'IpProtocol=tcp,FromPort=80,ToPort=80,UserIdGroupPairs=[{GroupId=sg-0aad1c26bb6EXAMPLE}]'
To remove security group rules

Use the following revoke-security-group-ingress command to remove an inbound rule.

aws ec2 revoke-security-group-egress \ --group id sg-1234567890abcdef0 \ --security-group-rule-ids sgr-09ed298024EXAMPLE

Use the following revoke-security-group-egress command to remove an outbound rule.

aws ec2 revoke-security-group-ingress \ --group id sg-1234567890abcdef0 \ --security-group-rule-ids sgr-0352250c1aEXAMPLE
To modify security group rules

Use the modify-security-group-rules command. The following example changes the IPv4 CIDR block of the specified security group rule.

aws ec2 modify-security-group-rules \ --group id sg-1234567890abcdef0 \ --security-group-rules 'SecurityGroupRuleId=sgr-09ed298024EXAMPLE,SecurityGroupRule={IpProtocol=tcp,FromPort=80,ToPort=80,CidrIpv4=0.0.0.0/0}'
PowerShell
To add security group rules

Use the Grant-EC2SecurityGroupIngress cmdlet to add inbound rules. The following example allows inbound SSH traffic from the CIDR blocks in the specified prefix list.

$plid = New-Object -TypeName Amazon.EC2.Model.PrefixListId $plid.Id = "pl-f8a6439156EXAMPLE" Grant-EC2SecurityGroupIngress ` -GroupId sg-1234567890abcdef0 ` -IpPermission @{IpProtocol="tcp"; FromPort=22; ToPort=22; PrefixListIds=$plid}

Use the Grant-EC2SecurityGroupEgress cmdlet to add outbound rules. The following example allows outbound TCP traffic on port 80 to instances with the specified security group.

$uigp = New-Object -TypeName Amazon.EC2.Model.UserIdGroupPair $uigp.GroupId = "sg-0aad1c26bb6EXAMPLE" Grant-EC2SecurityGroupEgress ` -GroupId sg-1234567890abcdef0 ` -IpPermission @{IpProtocol="tcp"; FromPort=80; ToPort=80; UserIdGroupPairs=$uigp}
To remove security group rules

Use the Revoke-EC2SecurityGroupIngress cmdlet to remove inbound rules.

Revoke-EC2SecurityGroupIngress ` -GroupId sg-1234567890abcdef0 ` -SecurityGroupRuleId sgr-09ed298024EXAMPLE

Use the Revoke-EC2SecurityGroupEgress cmdlet to remove outbound rules.

Revoke-EC2SecurityGroupEgress ` -GroupId sg-1234567890abcdef0 ` -SecurityGroupRuleId sgr-0352250c1aEXAMPLE
To modify security group rules

Use the Edit-EC2SecurityGroupRule cmdlet. The following example changes the IPv4 CIDR block of the specified security group rule.

$sgrr = New-Object -TypeName Amazon.EC2.Model.SecurityGroupRuleRequest $sgrr.IpProtocol = "tcp" $sgrr.FromPort = 80 $sgrr.ToPort = 80 $sgrr.CidrIpv4 = "0.0.0.0/0" $sgr = New-Object -TypeName Amazon.EC2.Model.SecurityGroupRuleUpdate $sgr.SecurityGroupRuleId = "sgr-09ed298024EXAMPLE" $sgr.SecurityGroupRule = $sgrr Edit-EC2SecurityGroupRule ` -GroupId sg-1234567890abcdef0 ` -SecurityGroupRule $sgr