Quick recap: I’m building a DIY security alarm using a Raspberry Pi, hardwired PIR sensors, and MQTT integration with Home Assistant.

Hello again — it seems to be close to a year since I last managed to get some words published on this blog. And almost three years since I last wrote about my Raspberry Pi security alarm project 😮

But the project is still alive and well. We use it every night and whenever we are away, and it just works 😃 Development usually happens in bulk, with very little happening in between.

In the fall of 2022 I turned off Zeta, my file server, due to the extreme price of electricity. I migrated all the data to a 3x18 TB raidz1 pool on Alpha instead.

But last year I brought it back — and used the opportunity to add some more memory, and rebuild the main storage pool 🤓

When I was trying out Netdata last year — I noticed I had lots of inbound_packets_dropped_ratio warnings, on multiple nodes.

Time to investigate 👇

I’ve looked into different video solution for this blog before — and, at the time, settled on using Coconut.co for encoding, AWS S3 for hosting, and Video.js for playing.

Bunny Stream was on the table back then, but I wanted a more hands on solution. Well — this time around I wanted a hands off solution, where the videos just work without me having to worry about it 🙂

And for that — Bunny Stream is pretty awesome, so that’s what I’m using now 👍

Getting network to the garage is a story with many chapters. I started out with Wi-Fi mesh, then CAT6 — and now, finally, fiber!