Docker environment to flash, configure, and interact with boards running Micropython.

Tested with:

• ESP32-DevKitC
• ESP32-PICO-KIT

Everything is executed using make because it keeps the interface simple. All targets assume that the ESP32 device is attached via USB to the DEVICE_PORT defined in the Dockerfile (default: /dev/ttyUSB0).

If you want to run it without this device attached, use: docker-compose -f docker-compose-no-device.yml ...

make erase-esp32-flash 

make flash-esp32-firmware 

make configure-device 

This:

1. Copies all the files in the ./filesystem directory in the Micropython filesystem root, including:

• boot.py - executed on power up and attempts to connect to WiFi (for the specified SSID and PASSWORD) and starts the web repl
• webrepl_cfg.py - defines the webrepl password (PASS) configuration variable

2. Resets the device in order to execute the new boot.py

3. Prints the MAC address of the device in case you need to whitelist it

4. Waits for the network connection and then print the device's IP address

By default, this attempts to connect to the DEVICE_PORT specified in the Dockerfile using GNU Screen. To kill a GNU Screen session, type: ctrl-a k y

make repl 

This will give you a bash prompt within the container from which you can use esptool, ampy, etc. directly.

make shell