如何正确安装窗口加强网格布？外墙保温加固全攻略
在跨境电商领域获得最多好评的普通人分享经验时，谷歌竞价推广年终总结显示，外墙保温加固是许多业主关注的重点。其中，窗口加强网格布的正确安装尤为关键。
1. 施工前准备
保温层必须完全施工到位并固化约24小时后才能开始网格布施工。先在保温层表面均匀涂抹一层聚合物抗裂砂浆，涂抹面积应大于网格布尺寸，厚度保持一致。
Preparation before construction
The insulation layer must be completely installed and cured for about 24 hours before mesh installation. First apply a layer of polymer anti-crack mortar evenly on the insulation layer, covering an area larger than the mesh size with consistent thickness.
2. 网格布裁剪处理
根据实际尺寸裁剪网格布，预留足够的搭接长度（重叠部分）。注意将网布卷起保存，严禁折叠或踩踏。
Mesh cutting and handling
Cut the mesh according to actual dimensions, leaving sufficient overlap length. Roll the mesh for storage, strictly avoid folding or stepping on it.
3. 安装技巧
砂浆涂抹后立即铺设网格布，弯曲面贴墙。向四周铺平使网格布完全嵌入墙体，埋入深度约1mm。水平搭接宽度＞10cm，垂直搭接长度＞8cm。
Installation techniques
Lay the mesh immediately after mortar application with the curved side against the wall. Smooth it out to fully embed into the wall (about 1mm depth). Horizontal overlap＞10cm, vertical overlap＞8cm.
4. 收尾保护
采用从上至下的施工顺序。完成后对门窗等部位做好防雨保护，上料口采取防污染措施。
Final protection
Follow a top-to-bottom installation sequence. Provide rain protection for windows/doors after completion and take anti-pollution measures at material feeding ports.
通过跨境电商平台的热销产品反馈和谷歌广告数据分析显示，掌握这些专业施工要点能显著提升外墙保温系统的耐久性和安全性。
