Writing R Extensions ¶

1.1.1 The DESCRIPTION file ¶

The DESCRIPTION file contains basic information about the package in the following format:

Package: pkgname Version: 0.5-1 Date: 2015-01-01 Title: My First Collection of Functions Authors@R: c(person("Joe", "Developer", role = c("aut", "cre"), email = "Joe.Developer@some.domain.net", comment = c(ORCID = "nnnn-nnnn-nnnn-nnnn")), person("Pat", "Developer", role = "aut"), person("A.", "User", role = "ctb", email = "A.User@whereever.net")) Author: Joe Developer [aut, cre], Pat Developer [aut], A. User [ctb] Maintainer: Joe Developer <Joe.Developer@some.domain.net> Depends: R (>= 3.1.0), nlme Suggests: MASS Description: A (one paragraph) description of what the package does and why it may be useful. License: GPL (>= 2) URL: https://www.r-project.org, http://www.another.url BugReports: https://pkgname.bugtracker.url

The format is that of a version of a ‘Debian Control File’ (see the help for ‘read.dcf’ and https://www.debian.org/doc/debian-policy/ch-controlfields.html: R does not require encoding in UTF-8 and does not support comments starting with ‘#’). Fields start with an ASCII name immediately followed by a colon: the value starts after the colon and a space. Continuation lines (for example, for descriptions longer than one line) start with a space or tab. Field names are case-sensitive: all those used by R are capitalized.

For maximal portability, the DESCRIPTION file should be written entirely in ASCII — if this is not possible it must contain an ‘Encoding’ field (see below).

Several optional fields take logical values: these can be specified as ‘yes’, ‘true’, ‘no’ or ‘false’: capitalized values are also accepted.

The ‘Package’, ‘Version’, ‘License’, ‘Description’, ‘Title’, ‘Author’, and ‘Maintainer’ fields are mandatory, all other fields are optional. Fields ‘Author’ and ‘Maintainer’ can be auto-generated from ‘Authors@R’, and may be omitted if the latter is provided: however if they are not ASCII we recommend that they are provided.

The mandatory ‘Package’ field gives the name of the package. This should contain only (ASCII) letters, numbers and dot, have at least two characters and start with a letter and not end in a dot. If it needs explaining, this should be done in the ‘Description’ field (and not the ‘Title’ field).

The mandatory ‘Version’ field gives the version of the package. This is a sequence of at least two (and usually three) non-negative integers separated by single ‘.’ or ‘-’ characters. The canonical form is as shown in the example, and a version such as ‘0.01’ or ‘0.01.0’ will be handled as if it were ‘0.1-0’. It is not a decimal number, so for example 0.9 < 0.75 since 9 < 75.

The mandatory ‘License’ field is discussed in the next subsection.

The mandatory ‘Title’ field should give a short description of the package. Some package listings may truncate the title to 65 characters. It should use title case (that is, use capitals for the principal words: tools::toTitleCase can help you with this), not use any markup, not have any continuation lines, and not end in a period (unless part of …). Do not repeat the package name: it is often used prefixed by the name. Refer to other packages and external software in single quotes, and to book titles (and similar) in double quotes.

The mandatory ‘Description’ field should give a comprehensive description of what the package does. One can use several (complete) sentences, but only one paragraph. It should be intelligible to all the intended readership (e.g. for a CRAN package to all CRAN users). It is good practice not to start with the package name, ‘This package’ or similar. As with the ‘Title’ field, double quotes should be used for quotations (including titles of books and articles), and single quotes for non-English usage, including names of other packages and external software. This field should also be used for explaining the package name if necessary. URLs should be enclosed in angle brackets, e.g. ‘<https://www.r-project.org>’: see also Specifying URLs.

The mandatory ‘Author’ field describes who wrote the package. It is a plain text field intended for human readers, but not for automatic processing (such as extracting the email addresses of all listed contributors: for that use ‘Authors@R’). Note that all significant contributors must be included: if you wrote an R wrapper for the work of others included in the src directory, you are not the sole (and maybe not even the main) author.

The mandatory ‘Maintainer’ field should give a single name followed by a valid (RFC 2822) email address in angle brackets. It should not end in a period or comma. This field is what is reported by the maintainer function and used by bug.report. For a CRAN package it should be a person, not a mailing list and not a corporate entity: do ensure that it is valid and will remain valid for the lifetime of the package.

Note that the display name (the part before the address in angle brackets) should be enclosed in double quotes if it contains non-alphanumeric characters such as comma or period. (The current standard, RFC 5322, allows periods but RFC 2822 did not.)

Both ‘Author’ and ‘Maintainer’ fields can be omitted if a suitable ‘Authors@R’ field is given. This field can be used to provide a refined and machine-readable description of the package “authors” (in particular specifying their precise roles), via suitable R code. It should create an object of class "person", by either a call to person or a series of calls (one per “author”) concatenated by c(): see the example DESCRIPTION file above. The roles can include ‘"aut"’ (author) for full authors, ‘"cre"’ (creator) for the package maintainer, and ‘"ctb"’ (contributor) for other contributors, ‘"cph"’ (copyright holder, which should be the legal name for an institution or corporate body), among others. See ?person for more information. Note that no role is assumed by default. Auto-generated package citation information takes advantage of this specification. The ‘Author’ and ‘Maintainer’ fields are auto-generated from it if needed when building⁵ or installing. Note that for CRAN submissions, providing ‘Authors@R’ is required, and providing ORCID or ROR identifiers (see https://orcid.org/ and https://ror.org/) where possible is strongly encouraged.

An optional ‘Copyright’ field can be used where the copyright holder(s) are not the authors. If necessary, this can refer to an installed file: the convention is to use file inst/COPYRIGHTS.

The optional ‘Date’ field gives the release date of the current version of the package. Using the ‘yyyy-mm-dd’ format of the ISO 8601 standard is strongly recommended⁶.

The ‘Depends’, ‘Imports’, ‘Suggests’, ‘Enhances’, ‘LinkingTo’ and ‘Additional_repositories’ fields are discussed in a later subsection.

Dependencies external to the R system should be listed in the ‘SystemRequirements’ field, possibly amplified in a separate README file. This includes specifying a non-default C++ standard and the need for GNU make.

The ‘URL’ field may give a list of URLs separated by commas or whitespace, for example the homepage of the author or a page where additional material describing the software can be found. These URLs are converted to active hyperlinks in CRAN package listings. See Specifying URLs.

The ‘BugReports’ field may contain a single URL to which bug reports about the package should be submitted. This URL will be used by bug.report instead of sending an email to the maintainer. A browser is opened for a ‘http://’ or ‘https://’ URL. To specify another email address for bug reports, use ‘Contact’ instead: however bug.report will try to extract an email address (preferably from a ‘mailto:’ URL or enclosed in angle brackets) from ‘BugReports’.

Base and recommended packages (i.e., packages contained in the R source distribution or available from CRAN and recommended to be included in every binary distribution of R) have a ‘Priority’ field with value ‘base’ or ‘recommended’, respectively. These priorities must not be used by other packages.

A ‘Collate’ field can be used for controlling the collation order for the R code files in a package when these are processed for package installation. The default is to collate according to the ‘C’ locale. If present, the collate specification must list all R code files in the package (taking possible OS-specific subdirectories into account, see Package subdirectories) as a whitespace separated list of file paths relative to the R subdirectory. Paths containing white space or quotes need to be quoted. An OS-specific collation field (‘Collate.unix’ or ‘Collate.windows’) will be used in preference to ‘Collate’.

The ‘LazyData’ logical field controls whether the R datasets use lazy-loading. A ‘LazyLoad’ field was used in versions prior to 2.14.0, but now is ignored.

The ‘KeepSource’ logical field controls if the package code is sourced using keep.source = TRUE or FALSE: it might be needed exceptionally for a package designed to always be used with keep.source = TRUE.

The ‘ByteCompile’ logical field controls if the package R code is to be byte-compiled on installation: the default is to byte-compile. This can be overridden by installing with flag --no-byte-compile.

The ‘UseLTO’ logical field is used to indicate if source code in the package⁷ is to be compiled with Link-Time Optimization (see Using Link-time Optimization) if R was installed with --enable-lto (default true) or --enable-lto=R (default false) (or on Windows⁸ if LTO_OPT is set in MkRules). This can be overridden by the flags --use-LTO and --no-use-LTO. LTO is said to give most size and performance improvements for large and complex (heavily templated) C++ projects.

The ‘StagedInstall’ logical field controls if package installation is ‘staged’, that is done to a temporary location and moved to the final location when successfully completed. This field was introduced in R 3.6.0 and is true by default: it is considered to be a temporary measure which may be withdrawn in future.

The ‘ZipData’ logical field has been ignored since R 2.13.0.

The ‘Biarch’ logical field is used on Windows to select the INSTALL option --force-biarch for this package. Not currently relevant.

The ‘BuildVignettes’ logical field can be set to a false value to stop R CMD build from attempting to build the vignettes, as well as preventing⁹ R CMD check from testing this. This should only be used exceptionally, for example if the PDFs include large figures which are not part of the package sources (and hence only in packages which do not have an Open Source license).

The ‘VignetteBuilder’ field names (in a comma-separated list) packages that provide an engine for building vignettes. These may include the current package, or ones listed in ‘Depends’, ‘Suggests’ or ‘Imports’. The utils package is always implicitly appended. See Non-Sweave vignettes for details. Note that if, for example, a vignette has engine ‘knitr::rmarkdown’, then knitr provides the engine but both knitr and rmarkdown are needed for using it, so both these packages need to be in the ‘VignetteBuilder’ field and at least suggested (as rmarkdown is only suggested by knitr, and hence not available automatically along with it). Many packages using knitr also need the package formatR which it suggests and so the user package needs to do so too and include this in ‘VignetteBuilder’.

If the DESCRIPTION file is not entirely in ASCII it should contain an ‘Encoding’ field specifying an encoding. This is used as the encoding of the DESCRIPTION file itself and of the R and NAMESPACE files, and as the default encoding of .Rd files. The examples are assumed to be in this encoding when running R CMD check, and it is used for the encoding of the CITATION file. Only encoding names latin1 and and UTF-8 are known to be portable. (Do not specify an encoding unless one is actually needed: doing so makes the package less portable. If a package has a specified encoding, you should run R CMD build etc in a locale using that encoding.)

The ‘NeedsCompilation’ field should be set to "yes" if the package contains native code which needs to be compiled, otherwise "no" (when the package could be installed from source on any platform without additional tools). This is used by install.packages(type = "both") in R >= 2.15.2 on platforms where binary packages are the norm: it is normally set by R CMD build or the repository assuming compilation is required if and only if the package has a src directory.

The ‘OS_type’ field specifies the OS(es) for which the package is intended. If present, it should be one of unix or windows, and indicates that the package can only be installed on a platform with ‘.Platform$OS.type’ having that value.

The ‘Type’ field specifies the type of the package: see Package types.

One can add subject classifications for the content of the package using the fields ‘Classification/ACM’ or ‘Classification/ACM-2012’ (using the Computing Classification System of the Association for Computing Machinery, https://www.acm.org/publications/class-2012; the former refers to the 1998 version), ‘Classification/JEL’ (the Journal of Economic Literature Classification System, https://www.aeaweb.org/econlit/jelCodes.php, or ‘Classification/MSC’ or ‘Classification/MSC-2010’ (the Mathematics Subject Classification of the American Mathematical Society, https://mathscinet.ams.org/msc/msc2010.html; the former refers to the 2000 version). The subject classifications should be comma-separated lists of the respective classification codes, e.g., ‘Classification/ACM: G.4, H.2.8, I.5.1’.

A ‘Language’ field can be used to indicate if the package documentation is not in English: this should be a comma-separated list of standard (not private use or grandfathered) IETF language tags as currently defined by RFC 5646 (https://www.rfc-editor.org/rfc/rfc5646, see also https://en.wikipedia.org/wiki/IETF_language_tag), i.e., use language subtags which in essence are 2-letter ISO 639-1 (https://en.wikipedia.org/wiki/ISO_639-1) or 3-letter ISO 639-3 (https://en.wikipedia.org/wiki/ISO_639-3) language codes.

An ‘RdMacros’ field can be used to hold a comma-separated list of packages from which the current package will import Rd macro definitions. These package should also be listed in ‘Imports’ (or ‘Depends’). The macros in these packages will be imported after the system macros, in the order listed in the ‘RdMacros’ field, before any macro definitions in the current package are loaded. Macro definitions in individual .Rd files in the man directory are loaded last, and are local to later parts of that file. In case of duplicates, the last loaded definition will be used.¹⁰ Both R CMD Rd2pdf and R CMD Rdconv have an optional flag --RdMacros=pkglist. The option is also a comma-separated list of package names, and has priority over the value given in DESCRIPTION. Packages using Rd macros should depend on R 3.2.0 or later.

Note: There should be no ‘Built’ or ‘Packaged’ fields, as these are added by the package management tools.

There is no restriction on the use of other fields not mentioned here (but using other capitalizations of these field names would cause confusion). Fields Note, Contact (for contacting the authors/developers¹¹) and MailingList are in common use. Some repositories (including CRAN and R-forge) add their own fields.

1.1.2 Licensing ¶

Licensing for a package which might be distributed is an important but potentially complex subject.

It is very important that you include license information! Otherwise, it may not even be legally correct for others to distribute copies of the package, let alone use it.

The package management tools use the concept of ‘free or open source software’ (FOSS, e.g., https://en.wikipedia.org/wiki/FOSS) licenses: the idea being that some users of R and its packages want to restrict themselves to such software. Others need to ensure that there are no restrictions stopping them using a package, e.g. forbidding commercial or military use. It is a central tenet of FOSS software that there are no restrictions on users nor usage.

Do not use the ‘License’ field for information on copyright holders: if needed, use a ‘Copyright’ field.

The mandatory ‘License’ field in the DESCRIPTION file should specify the license of the package in a standardized form. Alternatives are indicated via vertical bars. Individual specifications must be one of

• One of the “standard” short specifications

  GPL-2 GPL-3 LGPL-2 LGPL-2.1 LGPL-3 AGPL-3 Artistic-2.0 BSD_2_clause BSD_3_clause MIT 

  as made available via https://www.R-project.org/Licenses/ and contained in subdirectory share/licenses of the R source or home directory.

• The names or abbreviations of other licenses contained in the license data base in file share/licenses/license.db in the R source or home directory, possibly (for versioned licenses) followed by a version restriction of the form ‘(op v)’ with ‘op’ one of the comparison operators ‘<’, ‘<=’, ‘>’, ‘>=’, ‘==’, or ‘!=’ and ‘v’ a numeric version specification (strings of non-negative integers separated by ‘.’), possibly combined via ‘,’ (see below for an example). For versioned licenses, one can also specify the name followed by the version, or combine an existing abbreviation and the version with a ‘-’.

  Abbreviations GPL and LGPL are ambiguous and usually¹² taken to mean any version of the license: but it is better not to use them.

• One of the strings ‘file LICENSE’ or ‘file LICENCE’ referring to a file named LICENSE or LICENCE in the package (source and installation) top-level directory.
• The string ‘Unlimited’, meaning that there are no restrictions on distribution or use other than those imposed by relevant laws (including copyright laws).

Multiple licences can be specified separated by ‘|’ (surrounded by spaces) in which case the user can choose any of the alternatives.

If a package license restricts a base license (where permitted, e.g., using GPL-3 or AGPL-3 with an attribution clause), the additional terms should be placed in file LICENSE (or LICENCE), and the string ‘+ file LICENSE’ (or ‘+ file LICENCE’, respectively) should be appended to the corresponding individual license specification (preferably with the ‘+’ surrounded by spaces). Note that several commonly used licenses do not permit restrictions: this includes GPL-2 and hence any specification which includes it.

Examples of standardized specifications include

License: GPL-2 License: LGPL (>= 2.0, < 3) | Mozilla Public License License: GPL-2 | file LICENCE License: GPL (>= 2) | BSD_3_clause + file LICENSE License: Artistic-2.0 | AGPL-3 + file LICENSE 

Please note in particular that “Public domain” is not a valid license, since it is not recognized in some jurisdictions.

Please ensure that the license you choose also covers any dependencies (including system dependencies) of your package: it is particularly important that any restrictions on the use of such dependencies are evident to people reading your DESCRIPTION file.

Fields ‘License_is_FOSS’ and ‘License_restricts_use’ may be added by repositories where information cannot be computed from the name of the license. ‘License_is_FOSS: yes’ is used for licenses which are known to be FOSS, and ‘License_restricts_use’ can have values ‘yes’ or ‘no’ if the LICENSE file is known to restrict users or usage, or known not to. These are used by, e.g., the available.packages filters.

The optional file LICENSE/LICENCE contains a copy of the license of the package. To avoid any confusion only include such a file if it is referred to in the ‘License’ field of the DESCRIPTION file.

Whereas you should feel free to include a license file in your source distribution, please do not arrange to install yet another copy of the GNU COPYING or COPYING.LIB files but refer to the copies on https://www.R-project.org/Licenses/ and included in the R distribution (in directory share/licenses). Since files named LICENSE or LICENCE will be installed, do not use these names for standard license files. To include comments about the licensing rather than the body of a license, use a file named something like LICENSE.note.

A few “standard” licenses are rather license templates which need additional information to be completed via ‘+ file LICENSE’ (with the ‘+’ surrounded by spaces). Where the additional information is ‘COPYRIGHT HOLDER’, this must give the actual legal entities (not something vague like ‘Name-of-package authors’): if more than one they should be listed in decreasing order of contribution.

1.1.3 Package Dependencies ¶

The ‘Depends’ field gives a comma-separated list of package names which this package depends on. Those packages will be attached before the current package when library or require is called. Each package name may be optionally followed by a comment in parentheses specifying a version requirement. The comment should contain a comparison operator, whitespace and a valid version number, e.g. ‘MASS (>= 3.1-20)’.

The ‘Depends’ field can also specify a dependence on a certain version of R — e.g., if the package works only with R version 4.0.0 or later, include ‘R (>= 4.0)’ in the ‘Depends’ field. (As here, trailing zeroes can be dropped and it is recommended that they are.) You can also require a certain SVN revision for R-devel or R-patched, e.g. ‘R (>= 2.14.0), R (>= r56550)’ requires a version later than R-devel of late July 2011 (including released versions of 2.14.0).

It makes no sense to declare a dependence on R without a version specification, nor on the package base: this is an R package and package base is always available.

A package or ‘R’ can appear more than once in the ‘Depends’ field, for example to give upper and lower bounds on acceptable versions.

It is inadvisable to use a dependence on R with patch level (the third digit) other than zero. Doing so with packages which others depend on will cause the other packages to become unusable under earlier versions in the series, and e.g. versions 4.x.1 are widely used throughout the Northern Hemisphere academic year.

Both library and the R package checking facilities use this field: hence it is an error to use improper syntax or misuse the ‘Depends’ field for comments on other software that might be needed. The R INSTALL facilities check if the version of R used is recent enough for the package being installed, and the list of packages which is specified will be attached (after checking version requirements) before the current package.

The ‘Imports’ field lists packages whose namespaces are imported from (as specified in the NAMESPACE file) but which do not need to be attached. Namespaces accessed by the ‘::’ and ‘:::’ operators must be listed here, or in ‘Suggests’ or ‘Enhances’ (see below). Ideally this field will include all the standard packages that are used, and it is important to include S4-using packages (as their class definitions can change and the DESCRIPTION file is used to decide which packages to re-install when this happens). Packages declared in the ‘Depends’ field should not also be in the ‘Imports’ field. Version requirements can be specified and are checked when the namespace is loaded.

The ‘Suggests’ field uses the same syntax as ‘Depends’ and lists packages that are not necessarily needed. This includes packages used only in examples, demos, tests or vignettes (see Writing package vignettes), and packages loaded in the body of functions. E.g., suppose an example¹³ from package foo uses a dataset from package bar. Then it is not necessary to have bar to use foo unless one wants to execute all the examples: it is useful to have bar, but not necessary. Version requirements can be specified but should be checked by the code which uses the package.

Finally, the ‘Enhances’ field lists packages “enhanced” by the package at hand, e.g., by providing methods for classes from these packages, or ways to handle objects from these packages (so several packages have ‘Enhances: chron’ because they can handle datetime objects from chron even though they prefer R’s native datetime functions). Version requirements can be specified, but are currently not used. Such packages cannot be required to check the package: any tests which use them must be conditional on the presence of the package. (If your tests use e.g. a dataset from another package it should be in ‘Suggests’ and not ‘Enhances’.)

The general rules are

• A package should be listed in only one of these fields.
• Packages whose namespace only is needed to load the package using library(pkgname) should be listed in the ‘Imports’ field and not in the ‘Depends’ field. Packages listed in import or importFrom directives in the NAMESPACE file should almost always be in ‘Imports’ and not ‘Depends’.
• Packages that need to be attached to successfully load the package using library(pkgname) must be listed in the ‘Depends’ field.
• All packages that are needed¹⁴ to successfully run R CMD check on the package must be listed in one of ‘Depends’ or ‘Suggests’ or ‘Imports’. Packages used to run examples or tests conditionally (e.g. via if(require(pkgname))) should be listed in ‘Suggests’ or ‘Enhances’. (This allows checkers to ensure that all the packages needed for a complete check are installed.)
• Packages needed to use datasets from the package should be in ‘Imports’: this includes those needed to define S4 classes used.

In particular, packages providing “only” data for examples, demos or vignettes should be listed in ‘Suggests’ rather than ‘Depends’ in order to make lean installations possible.

Version dependencies in the ‘Depends’ and ‘Imports’ fields are used by library when it loads the package, and install.packages checks versions for the ‘Depends’, ‘Imports’ and (for dependencies = TRUE) ‘Suggests’ fields.

It is important that the information in these fields is complete and accurate: it is for example used to compute which packages depend on an updated package and which packages can safely be installed in parallel.

This scheme was developed before all packages had namespaces (R 2.14.0 in October 2011), and good practice changed once that was in place.

Field ‘Depends’ should nowadays be used rarely, only for packages which are intended to be put on the search path to make their facilities available to the end user (and not to the package itself): for example it makes sense that a user of package latticeExtra would want the functions of package lattice made available.

Almost always packages mentioned in ‘Depends’ should also be imported from in the NAMESPACE file: this ensures that any needed parts of those packages are available when some other package imports the current package.

The ‘Imports’ field should not contain packages which are not imported from (via the NAMESPACE file or :: or ::: operators), as all the packages listed in that field need to be installed for the current package to be installed. (This is checked by R CMD check.)

R code in the package should call library or require only exceptionally. Such calls are never needed for packages listed in ‘Depends’ as they will already be on the search path. It used to be common practice to use require calls for packages listed in ‘Suggests’ in functions which used their functionality, but nowadays it is better to access such functionality via :: calls.

A package that wishes to make use of header files in other packages to compile its C/C++ code needs to declare them as a comma-separated list in the field ‘LinkingTo’ in the DESCRIPTION file. For example

LinkingTo: link1, link2 

The ‘LinkingTo’ field can have a version requirement which is checked at installation.

Specifying a package in ‘LinkingTo’ suffices if these are C/C++ headers containing source code or static linking is done at installation: the packages do not need to be (and usually should not be) listed in the ‘Depends’ or ‘Imports’ fields. This includes CRAN package BH and almost all users of RcppArmadillo and RcppEigen. Note that ‘LinkingTo’ applies only to installation: if a packages wishes to use headers to compile code in tests or vignettes the package providing them needs to be listed in ‘Suggests’ or perhaps ‘Depends’.

For another use of ‘LinkingTo’ see Linking to native routines in other packages.

The ‘Additional_repositories’ field is a comma-separated list of repository URLs where the packages named in the other fields may be found. It is currently used by R CMD check to check that the packages can be found, at least as source packages (which can be installed on any platform).

• Suggested packages

 if (requireNamespace("rgl", quietly = TRUE)) { rgl::plot3d(...) } else { ## do something else not involving rgl. } 

1.1.4 The INDEX file ¶

The optional file INDEX contains a line for each sufficiently interesting object in the package, giving its name and a description (functions such as print methods not usually called explicitly might not be included). Normally this file is missing and the corresponding information is automatically generated from the documentation sources (using tools::Rdindex()) when installing from source.

The file is part of the information given by library(help = pkgname).

Rather than editing this file, it is preferable to put customized information about the package into an overview help page (see Documenting packages) and/or a vignette (see Writing package vignettes).

1.1.5 Package subdirectories ¶

The R subdirectory contains R code files, only. The code files to be installed must start with an ASCII (lower or upper case) letter or digit and have one of the extensions¹⁵ .R, .S, .q, .r, or .s. We recommend using .R, as this extension seems to be not used by any other software. It should be possible to read in the files using source(), so R objects must be created by assignments. Note that there need be no connection between the name of the file and the R objects created by it. Ideally, the R code files should only directly assign R objects and definitely should not call functions with side effects such as require and options. If computations are required to create objects these can use code ‘earlier’ in the package (see the ‘Collate’ field) plus functions in the ‘Depends’ packages provided that the objects created do not depend on those packages except via namespace imports.

Extreme care is needed if top-level computations are made to depend on availability or not of other packages. In particular this applies to setMethods and setClass calls. Nor should they depend on the availability of external resources such as downloads.

Two exceptions are allowed: if the R subdirectory contains a file sysdata.rda (a saved image of one or more R objects: please use suitable compression as suggested by tools::resaveRdaFiles, and see also the ‘SysDataCompression’ DESCRIPTION field.) this will be lazy-loaded into the namespace environment – this is intended for system datasets that are not intended to be user-accessible via data. Also, files ending in ‘.in’ will be allowed in the R directory to allow a configure script to generate suitable files.

Only ASCII characters (and the control characters tab, form feed, LF and CR) should be used in code files. Other characters are accepted in comments¹⁶, but then the comments may not be readable in e.g. a UTF-8 locale. Non-ASCII characters in object names will normally¹⁷ fail when the package is installed. Any byte will be allowed in a quoted character string but ‘\uxxxx’ escapes should be used for non-ASCII characters. However, non-ASCII character strings may not be usable in some locales and may display incorrectly in others.

Various R functions in a package can be used to initialize and clean up. See Load hooks.

The man subdirectory should contain (only) documentation files for the objects in the package in R documentation (Rd) format. The documentation filenames must start with an ASCII (lower or upper case) letter or digit and have the extension .Rd (the default) or .rd. Further, the names must be valid in ‘file://’ URLs, which means¹⁸ they must be entirely ASCII and not contain ‘%’. See Writing R documentation files, for more information. Note that all user-level objects in a package should be documented; if a package pkg contains user-level objects which are for “internal” use only, it should provide a file pkg-internal.Rd which documents all such objects, and clearly states that these are not meant to be called by the user. See e.g. the sources for package grid in the R distribution. Note that packages which use internal objects extensively should not export those objects from their namespace, when they do not need to be documented (see Package namespaces).

Having a man directory containing no documentation files may give an installation error.

The man subdirectory may contain a subdirectory named macros; this will contain source for user-defined Rd macros. (See User-defined macros.) These use the Rd format, but may not contain anything but macro definitions, comments and whitespace.

The R and man subdirectories may contain OS-specific subdirectories named unix or windows.

The sources and headers for the compiled code are in src, plus optionally a file Makevars or Makefile (or for use on Windows, with extension .win or .ucrt). When a package is installed using R CMD INSTALL, make is used to control compilation and linking into a shared object for loading into R. There are default make variables and rules for this (determined when R is configured and recorded in R_HOME/etcR_ARCH/Makeconf), providing support for C, C++, fixed- or free-form Fortran, Objective C and Objective C++¹⁹ with associated extensions .c, .cc or .cpp, .f, .f90 or .f95,²⁰ .m, and .mm, respectively. We recommend using .h for headers, also for C++²¹ or Fortran include files. (Use of extension .C for C++ is no longer supported.) Files in the src directory should not be hidden (start with a dot), and hidden files will under some versions of R be ignored.

It is not portable (and may not be possible at all) to mix all these languages in a single package. Because R itself uses it, we know that C and fixed-form Fortran can be used together, and mixing C, C++ and Fortran usually work for the platform’s native compilers.

If your code needs to depend on the platform there are certain defines which can be used in C or C++. On all Windows builds (even 64-bit ones) ‘_WIN32’ will be defined: on 64-bit Windows builds also ‘_WIN64’. For Windows on ARM, test for ‘_M_ARM64’ or both ‘_WIN32’ and ‘__aarch64__’. On macOS ‘__APPLE__’ is defined²²; for an ‘Apple Silicon’ platform, test for both ‘__APPLE__’ and ‘__arm64__’.

The default rules can be tweaked by setting macros²³ in a file src/Makevars (see Using Makevars). Note that this mechanism should be general enough to eliminate the need for a package-specific src/Makefile. If such a file is to be distributed, considerable care is needed to make it general enough to work on all R platforms. If it has any targets at all, it should have an appropriate first target named ‘all’ and a (possibly empty) target ‘clean’ which removes all files generated by running make (to be used by ‘R CMD INSTALL --clean’ and ‘R CMD INSTALL --preclean’). There are platform-specific file names on Windows: src/Makevars.win takes precedence over src/Makevars and src/Makefile.win must be used. Since R 4.2.0, src/Makevars.ucrt takes precedence over src/Makevars.win and src/Makefile.ucrt takes precedence over src/Makefile.win. src/Makevars.ucrt and src/Makefile.ucrt will be ignored by earlier versions of R, and hence can be used to provide content specific to UCRT or Rtools42 and newer, but the support for .ucrt files may be removed in the future when building packages from source on the older versions of R will no longer be needed, and hence the files may be renamed back to .win. Some make programs require makefiles to have a complete final line, including a newline.

A few packages use the src directory for purposes other than making a shared object (e.g. to create executables). Such packages should have files src/Makefile and src/Makefile.win or src/Makefile.ucrt (unless intended for only Unix-alikes or only Windows). Note that on Unix such makefiles are included after R_HOME/etc/R_ARCH/Makeconf so all the usual R macros and make rules are available – for example C compilation will by default use the C compiler and flags with which R was configured. This also applies on Windows as from R 4.3.0: packages intended to be used with earlier versions should include that file themselves.

The order of inclusion of makefiles for a package which does not have a src/Makefile file is

For those which do, it is

Items in capitals are environment variables: those separated by commas are alternatives looked for in the order shown.

In very special cases packages may create binary files other than the shared objects/DLLs in the src directory. Such files will not be installed in a multi-architecture setting since R CMD INSTALL --libs-only is used to merge multiple sub-architectures and it only copies shared objects/DLLs. If a package wants to install other binaries (for example executable programs), it should provide an R script src/install.libs.R which will be run as part of the installation in the src build directory instead of copying the shared objects/DLLs. The script is run in a separate R environment containing the following variables: R_PACKAGE_NAME (the name of the package), R_PACKAGE_SOURCE (the path to the source directory of the package), R_PACKAGE_DIR (the path of the target installation directory of the package), R_ARCH (the arch-dependent part of the path, often empty), SHLIB_EXT (the extension of shared objects) and WINDOWS (TRUE on Windows, FALSE elsewhere). Something close to the default behavior could be replicated with the following src/install.libs.R file:

files <- Sys.glob(paste0("*", SHLIB_EXT)) dest <- file.path(R_PACKAGE_DIR, paste0('libs', R_ARCH)) dir.create(dest, recursive = TRUE, showWarnings = FALSE) file.copy(files, dest, overwrite = TRUE) if(file.exists("symbols.rds")) file.copy("symbols.rds", dest, overwrite = TRUE) 

On the other hand, executable programs could be installed along the lines of

execs <- c("one", "two", "three") if(WINDOWS) execs <- paste0(execs, ".exe") if ( any(file.exists(execs)) ) { dest <- file.path(R_PACKAGE_DIR, paste0('bin', R_ARCH)) dir.create(dest, recursive = TRUE, showWarnings = FALSE) file.copy(execs, dest, overwrite = TRUE) } 

Note the use of architecture-specific subdirectories of bin where needed. (Executables should installed under a bin directory and not under libs. It is good practice to check that they can be executed as part of the installation script, so a broken package is not installed.)

The data subdirectory is for data files: See Data in packages.

The demo subdirectory is for R scripts (for running via demo()) that demonstrate some of the functionality of the package. Demos may be interactive and are not checked automatically²⁴, so if testing is desired use code in the tests directory to achieve this. The script files must start with a (lower or upper case) letter and have one of the extensions .R or .r. If present, the demo subdirectory should also have a 00Index file with one line for each demo, giving its name and a description separated by a tab or at least three spaces. (This index file is not generated automatically.) Note that a demo does not have a specified encoding and so should be an ASCII file (see Encoding issues). Function demo() will use the package encoding if there is one, but this is mainly useful for non-ASCII comments.

The contents of the inst subdirectory will be copied recursively to the installation directory. Subdirectories of inst should not interfere with those used by R (currently, R, data, demo, exec, libs, man, help, html and Meta, and earlier versions used latex, R-ex). The copying of the inst happens after src is built so its Makefile can create files to be installed. To exclude files from being installed, one can specify a list of exclude patterns in file .Rinstignore in the top-level source directory. These patterns should be Perl-like regular expressions (see the help for regexp in R for the precise details), one per line, to be matched case-insensitively against the file and directory paths, e.g. doc/.*[.]png$ will exclude all PNG files in inst/doc based on the extension.

Note that with the exceptions of INDEX, LICENSE/LICENCE and NEWS, information files at the top level of the package will not be installed and so not be known to users of Windows and macOS compiled packages (and not seen by those who use R CMD INSTALL or install.packages() on the tarball). So any information files you wish an end user to see should be included in inst. Note that if the named exceptions also occur in inst, the version in inst will be that seen in the installed package.

Things you might like to add to inst are a CITATION file for use by the citation function, and a NEWS.Rd file for use by the news function. See its help page for the specific format restrictions of the NEWS.Rd file.

Another file sometimes needed in inst is AUTHORS or COPYRIGHTS to specify the authors or copyright holders when this is too complex to put in the DESCRIPTION file.

Subdirectory tests is for additional package-specific test code, similar to the specific tests that come with the R distribution. Test code can either be provided directly in a .R (or .r as from R 3.4.0) file, or via a .Rin file containing code which in turn creates the corresponding .R file (e.g., by collecting all function objects in the package and then calling them with the strangest arguments). The results of running a .R file are written to a .Rout file. If there is a corresponding²⁵ .Rout.save file, these two are compared, with differences being reported but not causing an error. The directory tests is copied to the check area, and the tests are run with the copy as the working directory and with R_LIBS set to ensure that the copy of the package installed during testing will be found by library(pkg_name). Note that the package-specific tests are run in a vanilla R session without setting the random-number seed, so tests which use random numbers will need to set the seed to obtain reproducible results (and it can be helpful to do so in all cases, to avoid occasional failures when tests are run).

If directory tests has a subdirectory Examples containing a file pkg-Ex.Rout.save, this is compared to the output file for running the examples when the latter are checked. Reference output should be produced without having the --timings option set (and note that --as-cran sets it).

If reference output is included for examples, demos, tests or vignettes do make sure that it is fully reproducible, as it will be compared verbatim to that produced in a check run, unless the ‘IGNORE_RDIFF’ markup is used. Things which trip up maintainers include displayed version numbers from loading other packages, printing numerical results to an unreproducibly high precision and printing timings. Another trap is small values which are in fact rounding error from zero: consider using zapsmall.

Subdirectory exec could contain additional executable scripts the package needs, typically scripts for interpreters such as the shell, Perl, or Tcl. NB: only files (and not directories) under exec are installed (and those with names starting with a dot are ignored), and they are all marked as executable (mode 755, moderated by ‘umask’) on POSIX platforms. Note too that this is not suitable for executable programs since some platforms support multiple architectures using the same installed package directory.

Subdirectory po is used for files related to localization: see Internationalization.

Subdirectory tools is the preferred place for auxiliary files needed during configuration, and also for sources need to re-create scripts (e.g. M4 files for autoconf: some prefer to put those in a subdirectory m4 of tools).

1.1.6 Data in packages ¶

The data subdirectory is for data files, either to be made available via lazy-loading or for loading using data(). (The choice is made by the ‘LazyData’ field in the DESCRIPTION file: the default is not to do so.) It should not be used for other data files needed by the package, and the convention has grown up to use directory inst/extdata for such files.

Data files can have one of three types as indicated by their extension: plain R code (.R or .r), tables (.tab, .txt, or .csv, see ?data for the file formats, and note that .csv is not the standard²⁶ CSV format), or save() images (.RData or .rda). The files should not be hidden (have names starting with a dot). Note that R code should be if possible “self-sufficient” and not make use of extra functionality provided by the package, so that the data file can also be used without having to load the package or its namespace: it should run as silently as possible and not change the search() path by attaching packages or other environments.

Images (extensions .RData²⁷ or .rda) can contain references to the namespaces of packages that were used to create them. Preferably there should be no such references in data files, and in any case they should only be to packages listed in the Depends and Imports fields, as otherwise it may be impossible to install the package. To check for such references, load all the images into a vanilla R session, run str() on all the datasets, and look at the output of loadedNamespaces().

Particular care is needed where a dataset or one of its components is of an S4 class, especially if the class is defined in a different package. First, the package containing the class definition has to be available to do useful things with the dataset, so that package must be listed in Imports or Depends (even if this gives a check warning about unused imports). Second, the definition of an S4 class can change, and often is unnoticed when in a package with a different author. So it may be wiser to use the .R form and use that to create the dataset object when needed (loading package namespaces but not attaching them by using requireNamespace(pkg, quietly = TRUE) and using pkg:: to refer to objects in the namespace).

If you are not using ‘LazyData’ and either your data files are large or e.g., you use data/foo.R scripts to produce your data, loading your namespace, you can speed up installation by providing a file datalist in the data subdirectory. This should have one line per topic that data() will find, in the format ‘foo’ if data(foo) provides ‘foo’, or ‘foo: bar bah’ if data(foo) provides ‘bar’ and ‘bah’. R CMD build will automatically add a datalist file to data directories of over 1Mb, using the function tools::add_datalist.

Tables (.tab, .txt, or .csv files) can be compressed by gzip, bzip2 or xz, optionally with additional extension .gz, .bz2 or .xz.

If your package is to be distributed, do consider the resource implications of large datasets for your users: they can make packages very slow to download and use up unwelcome amounts of storage space, as well as taking many seconds to load. It is normally best to distribute large datasets as .rda images prepared by save(, compress = TRUE) (the default). Using bzip2 or xz compression will usually reduce the size of both the package tarball and the installed package, in some cases by a factor of two or more.

Package tools has a couple of functions to help with data images: checkRdaFiles reports on the way the image was saved, and resaveRdaFiles will re-save with a different type of compression, including choosing the best type for that particular image.

Many packages using ‘LazyData’ will benefit from using a form of compression other than gzip in the installed lazy-loading database. This can be selected by the --data-compress option to R CMD INSTALL or by using the ‘LazyDataCompression’ field in the DESCRIPTION file. Useful values are bzip2, xz and the default, gzip: value none is also accepted. The only way to discover which is best is to try them all and look at the size of the pkgname/data/Rdata.rdb file. A function to do that (quoting sizes in KB) is

CheckLazyDataCompression <- function(pkg) { pkg_name <- sub("_.*", "", pkg) lib <- tempfile(); dir.create(lib) zs <- c("gzip", "bzip2", "xz") res <- integer(3); names(res) <- zs for (z in zs) { opts <- c(paste0("--data-compress=", z), "--no-libs", "--no-help", "--no-demo", "--no-exec", "--no-test-load") install.packages(pkg, lib, INSTALL_opts = opts, repos = NULL, quiet = TRUE) res[z] <- file.size(file.path(lib, pkg_name, "data", "Rdata.rdb")) } ceiling(res/1024) } 

(applied to a source package without any ‘LazyDataCompression’ field). R CMD check will warn if it finds a pkgname/data/Rdata.rdb file of more than 5MB without ‘LazyDataCompression’ being set. If you see that, run CheckLazyDataCompression() and set the field – to gzip in the unlikely event²⁸ that is the best choice.

The analogue for sysdata.rda is field ‘SysDataCompression’: the default is xz for files bigger than 1MB otherwise gzip.

Lazy-loading is not supported for very large datasets (those which when serialized exceed 2GB, the limit for the format on 32-bit platforms).

1.1.7 Non-R scripts in packages ¶

Code which needs to be compiled (C, C++, Fortran …) is included in the src subdirectory and discussed elsewhere in this document.

Subdirectory exec could be used for scripts for interpreters such as the shell, BUGS, JavaScript, Matlab, Perl, PHP (amap), Python or Tcl (Simile), or even R. However, it seems more common to use the inst directory, for example WriteXLS/inst/Perl, NMF/inst/m-files, RnavGraph/inst/tcl, RProtoBuf/inst/python and emdbook/inst/BUGS and gridSVG/inst/js.

Java code is a special case: except for very small programs, .java files should be byte-compiled (to a .class file) and distributed as part of a .jar file: the conventional location for the .jar file(s) is inst/java. It is desirable (and required under an Open Source license) to make the Java source files available: this is best done in a top-level java directory in the package—the source files should not be installed.

If your package requires one of these interpreters or an extension then this should be declared in the ‘SystemRequirements’ field of its DESCRIPTION file. (Users of Java most often do so via rJava, when depending on/importing that suffices unless there is a version requirement on Java code in the package.)

Windows and Mac users should be aware that the Tcl extensions ‘BWidget’ and ‘Tktable’ (which have sometimes been included in the Windows²⁹ and macOS R installers) are extensions and do need to be declared (and that ‘Tktable’ is less widely available than it used to be, including not in the main repositories for major Linux distributions). ‘BWidget’ needs to be installed by the user on other OSes. This is fairly easy to do: first find the Tcl search path:

library(tcltk) strsplit(tclvalue('auto_path'), " ")[[1]] 

then download the sources from https://sourceforge.net/projects/tcllib/files/BWidget/ and in a terminal run something like

tar xf bwidget-1.9.14.tar.gz sudo mv bwidget-1.9.14 /usr/local/lib 

substituting a location on the Tcl search path for /usr/local/lib if needed. (If no location on that search path is writeable, you will need to add one each time ‘BWidget’ is to be used with tcltk::addTclPath().)

To (silently) test for the presence of ‘Tktable’ one can use

library(tcltk) have_tktable <- !isFALSE(suppressWarnings(tclRequire('Tktable'))) 

Installing ‘Tktable’ needs a C compiler and the Tk headers (not necessarily installed with Tcl/Tk). At the time of writing the latest sources (from 2008) were available from https://sourceforge.net/projects/tktable/files/tktable/2.10/Tktable2.10.tar.gz/download, but needed patching for current Tk (8.6.11, but not 8.6.10) – a patch can be found at https://www.stats.ox.ac.uk/pub/bdr/Tktable/. For a system installation of Tk you may need to install ‘Tktable’ as ‘root’ as on e.g. Fedora all the locations on auto_path are owned by ‘root’.

1.1.8 Specifying URLs ¶

URLs in many places in the package documentation will be converted to clickable hyperlinks in at least some of their renderings. So care is needed that their forms are correct and portable.

The full URL should be given, including the scheme (often ‘http://’ or ‘https://’) and a final ‘/’ for references to directories.

Spaces in URLs are not portable and how they are handled does vary by HTTP server and by client. There should be no space in the host part of an ‘http://’ URL, and spaces in the remainder should be encoded, with each space replaced by ‘%20’.

Reserved characters should be encoded unless used in their reserved sense: see the help on URLencode().

The canonical URL for a CRAN package is

https://cran.r-project.org/package=pkgname 

and not a version starting ‘https://cran.r-project.org/web/packages/pkgname’.

1.2.1 Using Makevars ¶

Sometimes writing your own configure script can be avoided by supplying a file Makevars: also one of the most common uses of a configure script is to make Makevars from Makevars.in.

A Makevars file is a makefile and is used as one of several makefiles by R CMD SHLIB (which is called by R CMD INSTALL to compile code in the src directory). It should be written if at all possible in a portable style, in particular (except for Makevars.win and Makevars.ucrt) without the use of GNU extensions.

The most common use of a Makevars file is to set additional preprocessor options (for example include paths and definitions) for C/C++ files via PKG_CPPFLAGS, and additional compiler flags by setting PKG_CFLAGS, PKG_CXXFLAGS or PKG_FFLAGS, for C, C++ or Fortran respectively (see Creating shared objects).

N.B.: Include paths are preprocessor options, not compiler options, and must be set in PKG_CPPFLAGS as otherwise platform-specific paths (e.g. ‘-I/usr/local/include’) will take precedence. PKG_CPPFLAGS should contain ‘-I’, ‘-D’, ‘-U’ and (where supported) ‘-include’ and ‘-pthread’ options: everything else should be a compiler flag. The order of flags matters, and using ‘-I’ in PKG_CFLAGS or PKG_CXXFLAGS has led to hard-to-debug platform-specific errors.

Makevars can also be used to set flags for the linker, for example ‘-L’ and ‘-l’ options, via PKG_LIBS.

When writing a Makevars file for a package you intend to distribute, take care to ensure that it is not specific to your compiler: flags such as -O2 -Wall -pedantic (and all other -W flags: for the Oracle compilers these were used to pass arguments to compiler phases) are all specific to GCC (and compilers such as clang which aim to be options-compatible with it).

Also, do not set variables such as CPPFLAGS, CFLAGS etc.: these should be settable by users (sites) through appropriate personal (site-wide) Makevars files. See Customizing package compilation in R Installation and Administration for more information.

There are some macros³⁷ which are set whilst configuring the building of R itself and are stored in R_HOME/etcR_ARCH/Makeconf. That makefile is included as a Makefile after Makevars[.win], and the macros it defines can be used in macro assignments and make command lines in the latter. These include

FLIBS ¶

A macro containing the set of libraries need to link Fortran code. This may need to be included in PKG_LIBS: it will normally be included automatically if the package contains Fortran source files in the src directory.

BLAS_LIBS ¶

A macro containing the BLAS libraries used when building R. This may need to be included in PKG_LIBS. Beware that if it is empty then the R executable will contain all the double-precision and double-complex BLAS routines, but no single-precision nor complex routines. If BLAS_LIBS is included, then FLIBS also needs to be³⁸ included following it, as most BLAS libraries are written at least partially in Fortran. However, it can be omitted if the package contains Fortran source code as that will add FLIBS to the link line.

LAPACK_LIBS ¶

A macro containing the LAPACK libraries (and paths where appropriate) used when building R. This may need to be included in PKG_LIBS. It may point to a dynamic library libRlapack which contains the main double-precision LAPACK routines as well as those double-complex LAPACK routines needed to build R, or it may point to an external LAPACK library, or may be empty if an external BLAS library also contains LAPACK.

[libRlapack includes all the double-precision LAPACK routines which were current in 2003 and a few more recent ones: a list of which routines are included is in file src/modules/lapack/README. Note that an external LAPACK/BLAS library need not do so, as some were ‘deprecated’ (and not compiled by default) in LAPACK 3.6.0 in late 2015.]

For portability, the macros BLAS_LIBS and FLIBS should always be included after LAPACK_LIBS (and in that order).

SAFE_FFLAGS ¶

A macro containing flags which are needed to circumvent over-optimization of FORTRAN code: it is might be ‘-g -O2 -ffloat-store’ or ‘-g -O2 -msse2 -mfpmath=sse’ on ‘ix86’ platforms using gfortran. Note that this is not an additional flag to be used as part of PKG_FFLAGS, but a replacement for FFLAGS. See the example later in this section.

Setting certain macros in Makevars will prevent R CMD SHLIB setting them: in particular if Makevars sets ‘OBJECTS’ it will not be set on the make command line. This can be useful in conjunction with implicit rules to allow other types of source code to be compiled and included in the shared object. It can also be used to control the set of files which are compiled, either by excluding some files in src or including some files in subdirectories. For example

OBJECTS = 4dfp/endianio.o 4dfp/Getifh.o R4dfp-object.o 

Note that Makevars should not normally contain targets, as it is included before the default makefile and make will call the first target, intended to be all in the default makefile. If you really need to circumvent that, use a suitable (phony) target all before any actual targets in Makevars.[win]: for example package fastICA used to have

PKG_LIBS = @BLAS_LIBS@ SLAMC_FFLAGS=$(R_XTRA_FFLAGS) $(FPICFLAGS) $(SHLIB_FFLAGS) $(SAFE_FFLAGS) all: $(SHLIB) slamc.o: slamc.f $(FC) $(SLAMC_FFLAGS) -c -o slamc.o slamc.f 

needed to ensure that the LAPACK routines find some constants without infinite looping. The Windows equivalent was

all: $(SHLIB) slamc.o: slamc.f $(FC) $(SAFE_FFLAGS) -c -o slamc.o slamc.f 

(since the other macros are all empty on that platform, and R’s internal BLAS was not used). Note that the first target in Makevars will be called, but for back-compatibility it is best named all.

If you want to create and then link to a library, say using code in a subdirectory, use something like

.PHONY: all mylibs all: $(SHLIB) $(SHLIB): mylibs mylibs: (cd subdir; $(MAKE)) 

Be careful to create all the necessary dependencies, as there is no guarantee that the dependencies of all will be run in a particular order (and some of the CRAN build machines use multiple CPUs and parallel makes). In particular,

all: mylibs 

does not suffice. GNU make does allow the construct

.NOTPARALLEL: all all: mylibs $(SHLIB) 

but that is not portable. dmake and pmake allow the similar .NO_PARALLEL, also not portable: some variants of pmake accept .NOTPARALLEL as an alias for .NO_PARALLEL.

Note that on Windows it is required that Makevars[.win, .ucrt] does create a DLL: this is needed as it is the only reliable way to ensure that building a DLL succeeded. If you want to use the src directory for some purpose other than building a DLL, use a Makefile.win or Makefile.ucrt file.

It is sometimes useful to have a target ‘clean’ in Makevars, Makevars.win or Makevars.ucrt: this will be used by R CMD build to clean up (a copy of) the package sources. When it is run by build it will have fewer macros set, in particular not $(SHLIB), nor $(OBJECTS) unless set in the file itself. It would also be possible to add tasks to the target ‘shlib-clean’ which is run by R CMD INSTALL and R CMD SHLIB with options --clean and --preclean.

Avoid the use of default (also known as ‘implicit’ rules) in makefiles, as these are make-specific. Even when mandated by POSIX – GNU make does not comply and this has broken package installation.

An unfortunately common error is to have

all: $(SHLIB) clean 

which asks make to clean in parallel with compiling the code. Not only does this lead to hard-to-debug installation errors, it wipes out all the evidence of any error (from a parallel make or not). It is much better to leave cleaning to the end user using the facilities in the previous paragraph.

If you want to run R code in Makevars, e.g. to find configuration information, please do ensure that you use the correct copy of R or Rscript: there might not be one in the path at all, or it might be the wrong version or architecture. The correct way to do this is via

"$(R_HOME)/bin$(R_ARCH_BIN)/Rscript" filename "$(R_HOME)/bin$(R_ARCH_BIN)/Rscript" -e 'R expression' 

where $(R_ARCH_BIN) is only needed currently on Windows.

Environment or make variables can be used to select different macros for Intel 64-bit code or code for other architectures, for example (GNU make syntax, allowed on Windows)

ifeq "$(WIN)" "64" PKG_LIBS = value for 64-bit Intel Windows else PKG_LIBS = value for unknown Windows architectures endif 

On Windows there is normally a choice between linking to an import library or directly to a DLL. Where possible, the latter is much more reliable: import libraries are tied to a specific toolchain, and in particular on 64-bit Windows two different conventions have been commonly used. So for example instead of

PKG_LIBS = -L$(XML_DIR)/lib -lxml2 

one can use

PKG_LIBS = -L$(XML_DIR)/bin -lxml2 

since on Windows -lxxx will look in turn for

libxxx.dll.a xxx.dll.a libxxx.a xxx.lib libxxx.dll xxx.dll 

where the first and second are conventionally import libraries, the third and fourth often static libraries (with .lib intended for Visual C++), but might be import libraries. See for example https://sourceware.org/binutils/docs-2.20/ld/WIN32.html#WIN32.

The fly in the ointment is that the DLL might not be named libxxx.dll, and in fact on 32-bit Windows there was a libxml2.dll whereas on one build for 64-bit Windows the DLL is called libxml2-2.dll. Using import libraries can cover over these differences but can cause equal difficulties.

If static libraries are available they can save a lot of problems with run-time finding of DLLs, especially when binary packages are to be distributed and even more when these support both architectures. Where using DLLs is unavoidable we normally arrange (via configure.win or configure.ucrt) to ship them in the same directory as the package DLL.

• OpenMP support
• Using pthreads
• Compiling in sub-directories

SHLIB_OPENMP_CFLAGS SHLIB_OPENMP_CXXFLAGS SHLIB_OPENMP_FFLAGS 

PKG_CFLAGS = $(SHLIB_OPENMP_CFLAGS) PKG_LIBS = $(SHLIB_OPENMP_CFLAGS) 

PKG_FFLAGS = $(SHLIB_OPENMP_FFLAGS) PKG_LIBS = $(SHLIB_OPENMP_CFLAGS) 

USE_FC_TO_LINK = PKG_FFLAGS = $(SHLIB_OPENMP_FFLAGS) PKG_LIBS = $(SHLIB_OPENMP_FFLAGS) 

use omp_lib 

 undefined symbol: __atomic_compare_exchange undefined symbol: __atomic_load 

#pragma omp parallel for num_threads(nthreads) ... 

PKG_CPPFLAGS = -pthread PKG_LIBS = -pthread 

PKG_CPPFLAGS = -D_REENTRANT PKG_LIBS = -lpthread 

SOURCES = $(wildcard data/*.cpp network/*.cpp utils/*.cpp model/*.cpp model/*/*.cpp model/*/*/*.cpp) OBJECTS = siena07utilities.o siena07internals.o siena07setup.o siena07models.o $(SOURCES:.cpp=.o) 

OBJECTS.samplers = samplers/ExpandableArray.o samplers/Knots.o \ samplers/RJumpSpline.o samplers/RJumpSplineFactory.o \ samplers/RealSlicerOV.o samplers/SliceFactoryOV.o samplers/MNorm.o OBJECTS.distributions = distributions/DSpline.o \ distributions/DChisqrOV.o distributions/DTOV.o \ distributions/DNormOV.o distributions/DUnifOV.o distributions/RScalarDist.o OBJECTS.root = RJump.o OBJECTS = $(OBJECTS.samplers) $(OBJECTS.distributions) $(OBJECTS.root) 

PKG_LIBS = -LCsdp/lib -lsdp $(LAPACK_LIBS) $(BLAS_LIBS) $(FLIBS) $(SHLIB): Csdp/lib/libsdp.a Csdp/lib/libsdp.a: @(cd Csdp/lib && $(MAKE) libsdp.a \ CC="$(CC)" CFLAGS="$(CFLAGS) $(CPICFLAGS)" AR="$(AR)" RANLIB="$(RANLIB)") 

1.2.2 Configure example ¶

It may be helpful to give an extended example of using a configure script to create a src/Makevars file: this is based on that in the RODBC package.

The configure.ac file follows: configure is created from this by running autoconf in the top-level package directory (containing configure.ac).

AC_INIT([RODBC], 1.1.8) dnl package name, version dnl A user-specifiable option odbc_mgr="" AC_ARG_WITH([odbc-manager], AC_HELP_STRING([--with-odbc-manager=MGR], [specify the ODBC manager, e.g. odbc or iodbc]), [odbc_mgr=$withval]) if test "$odbc_mgr" = "odbc" ; then AC_PATH_PROGS(ODBC_CONFIG, odbc_config) fi dnl Select an optional include path, from a configure option dnl or from an environment variable. AC_ARG_WITH([odbc-include], AC_HELP_STRING([--with-odbc-include=INCLUDE_PATH], [the location of ODBC header files]), [odbc_include_path=$withval]) RODBC_CPPFLAGS="-I." if test [ -n "$odbc_include_path" ] ; then RODBC_CPPFLAGS="-I. -I${odbc_include_path}" else if test [ -n "${ODBC_INCLUDE}" ] ; then RODBC_CPPFLAGS="-I. -I${ODBC_INCLUDE}" fi fi dnl ditto for a library path AC_ARG_WITH([odbc-lib], AC_HELP_STRING([--with-odbc-lib=LIB_PATH], [the location of ODBC libraries]), [odbc_lib_path=$withval]) if test [ -n "$odbc_lib_path" ] ; then LIBS="-L$odbc_lib_path ${LIBS}" else if test [ -n "${ODBC_LIBS}" ] ; then LIBS="-L${ODBC_LIBS} ${LIBS}" else if test -n "${ODBC_CONFIG}"; then odbc_lib_path=`odbc_config --libs | sed s/-lodbc//` LIBS="${odbc_lib_path} ${LIBS}" fi fi fi dnl Now find the compiler and compiler flags to use : ${R_HOME=`R RHOME`} if test -z "${R_HOME}"; then echo "could not determine R_HOME" exit 1 fi CC=`"${R_HOME}/bin/R" CMD config CC` CFLAGS=`"${R_HOME}/bin/R" CMD config CFLAGS` CPPFLAGS=`"${R_HOME}/bin/R" CMD config CPPFLAGS` if test -n "${ODBC_CONFIG}"; then RODBC_CPPFLAGS=`odbc_config --cflags` fi CPPFLAGS="${CPPFLAGS} ${RODBC_CPPFLAGS}" dnl Check the headers can be found AC_CHECK_HEADERS(sql.h sqlext.h) if test "${ac_cv_header_sql_h}" = no || test "${ac_cv_header_sqlext_h}" = no; then AC_MSG_ERROR("ODBC headers sql.h and sqlext.h not found") fi dnl search for a library containing an ODBC function if test [ -n "${odbc_mgr}" ] ; then AC_SEARCH_LIBS(SQLTables, ${odbc_mgr}, , AC_MSG_ERROR("ODBC driver manager ${odbc_mgr} not found")) else AC_SEARCH_LIBS(SQLTables, odbc odbc32 iodbc, , AC_MSG_ERROR("no ODBC driver manager found")) fi dnl for 64-bit ODBC need SQL[U]LEN, and it is unclear where they are defined. AC_CHECK_TYPES([SQLLEN, SQLULEN], , , [# include <sql.h>]) dnl for unixODBC header AC_CHECK_SIZEOF(long, 4) dnl substitute RODBC_CPPFLAGS and LIBS AC_SUBST(RODBC_CPPFLAGS) AC_SUBST(LIBS) AC_CONFIG_HEADERS([src/config.h]) dnl and do substitution in the src/Makevars.in and src/config.h AC_CONFIG_FILES([src/Makevars]) AC_OUTPUT 

where src/Makevars.in would be simply

PKG_CPPFLAGS = @RODBC_CPPFLAGS@ PKG_LIBS = @LIBS@ 

A user can then be advised to specify the location of the ODBC driver manager files by options like (lines broken for easier reading)

R CMD INSTALL \ --configure-args='--with-odbc-include=/opt/local/include \ --with-odbc-lib=/opt/local/lib --with-odbc-manager=iodbc' \ RODBC 

or by setting the environment variables ODBC_INCLUDE and ODBC_LIBS.

1.2.3 Using modern Fortran code ¶

R assumes that source files with extension .f are fixed-form Fortran 90 (which includes Fortran 77), and passes them to the compiler specified by macro ‘FC’. The Fortran compiler will also accept free-form Fortran 90/95 code with extension .f90 or (most⁴⁷) .f95.

The same compiler is used for both fixed-form and free-form Fortran code (with different file extensions and possibly different flags). Macro PKG_FFLAGS can be used for package-specific flags: for the un-encountered case that both are included in a single package and that different flags are needed for the two forms, macro PKG_FCFLAGS is also available for free-form Fortran.

The code used to build R allows a ‘Fortran 90’ compiler to be selected as ‘FC’, so platforms might be encountered which only support Fortran 90. However, Fortran 95 is supported on all known platforms.

Most compilers specified by ‘FC’ will accept most Fortran 2003, 2008 or 2018 code: such code should still use file extension .f90. Most current platforms use gfortran where you might need to include -std=f2003, -std=f2008 or (from version 8) -std=f2018 in PKG_FFLAGS or PKG_FCFLAGS: the default is ‘GNU Fortran’, currently Fortran 2018 (but Fortran 95 prior to gfortran 8) with non-standard extensions. The other compilers in current use (LLVM’s flang (called flang-new before version 20) and Intel’s ifx) default to Fortran 2018⁴⁸.

It is good practice to describe a Fortran version requirement in DESCRIPTION’s ‘SystemRequirements’ field. Note that this is purely for information: the package also needs a configure script to determine the compiler and set appropriate option(s) and test that the features needed from the standard are actually supported.

The Fortran 2023 released in Nov 2023: as usual compiler vendors are introducing support incrementally. For Intel’s ifx see https://www.intel.com/content/www/us/en/developer/articles/technical/fortran-language-and-openmp-features-in-ifx.html#Fortran%20Standards. For LLVM’s flang see https://flang.llvm.org/docs/F202X.html. gfortran does not have complete support even for the 2008 and 2018 standards, but the option -std=f2023 is supported from version 14.1.

Modern versions of Fortran support modules, whereby compiling one source file creates a module file which is then included in others. (Module files typically have a .mod extension: they do depend on the compiler used and so should never be included in a package.) This creates a dependence which make will not know about and often causes installation with a parallel make to fail. Thus it is necessary to add explicit dependencies to src/Makevars to tell make the constraints on the order of compilation. For example, if file iface.f90 creates a module ‘iface’ used by files cmi.f90 and dmi.f90 then src/Makevars needs to contain something like

cmi.o dmi.o: iface.o 

Some maintainers have found it difficult to find all the module dependencies which leads to hard-to-reproduce installation failures. There are tools available to find these, including the Intel compiler’s flag -gen-dep and makedepf90.

Note that it is not portable (although some platforms do accept it) to define a module of the same name in multiple source files.

1.2.4 Using C++ code ¶

R can be built without a C++ compiler although one is available (but not necessarily installed) on all known R platforms. As from R 4.0.0 a C++ compiler will be selected only if it conforms to the 2011 standard (‘C++11’). A minor update⁴⁹ (‘C++14’) was published in December 2014 and was used by default as from R 4.1.0 if supported. Further revisions ‘C++17’ (in December 2017), ‘C++20’ (with many new features in December 2020) and ‘C++23’ (in October 2024) have been published since. The next revision, ‘C++26’, is expected in 2026/7 and several compilers already have considerable support for the current draft.

The support in R for these standards has varied over the years: this version of the manual only describes R 4.3.0 and later. For details of earlier versions, see the corresponding section in their manuals.

The default standard for compiling R packages was changed to C++17 in R 4.3.0 if supported, and from R 4.4.0 only a C++17 compiler will be selected as the default C++ compiler.

What standard a C++ compiler aims to support can be hard to determine: the value⁵⁰ of __cplusplus may help but some compilers use it to denote a standard which is partially supported and some the latest standard which is (almost) fully supported. On a Unix-alike configure will try to identify a compiler and flags for each of the standards: this relies heavily on the reported values of __cplusplus.

The webpage https://en.cppreference.com/w/cpp/compiler_support gives some information on which compiler versions are known to support recent C++ features.

C++ standards have deprecated and later removed features. Be aware that some current compilers still accept removed features in C++17 mode, such as std::unary_function (deprecated in C++11, removed in C++17).

For maximal portability a package should specify the standard it requires for code in its src directory by including something like ‘C++14’ in the ‘SystemRequirements’ field of the DESCRIPTION file, e.g.

SystemRequirements: C++14 

If it has a Makevars file (or Makevars.win or Makevars.ucrt on Windows) this should include the line

CXX_STD = CXX14 

On the other hand, specifying C++11⁵¹ when the code is valid under C++14 or C++17 reduces future portability.

Code needing C++14 or later features can check for their presence via ‘SD-6 feature tests’⁵². Such a check could be

#include <memory> // header where this is defined #if defined(__cpp_lib_make_unique) && (__cpp_lib_make_unique >= 201304) using std::make_unique; #else // your emulation #endif 

C++17, C++20, C++23 and C++26 (from R 4.5.0) can be specified in an analogous way.

Note that C++17 or later ‘support’ does not mean complete support: use feature tests as well as resources such as https://en.cppreference.com/w/cpp/compiler_support, https://gcc.gnu.org/projects/cxx-status.html and https://clang.llvm.org/cxx_status.html to see if the features you want to use are widely implemented.

Attempts to specify an unknown C++ standard are silently ignored: recent versions of R throw an error for C++98 and for known standards for which no compiler+flags has been detected.

If a package using C++ has a configure script it is essential that the script selects the correct C++ compiler and standard, via something like

CXX17=`"${R_HOME}/bin/R" CMD config CXX17` if test -z "$CXX17"; then AC_MSG_ERROR([No C++17 compiler is available]) fi CXX17STD=`"${R_HOME}/bin/R" CMD config CXX17STD` CXX="${CXX17} ${CXX17STD}" CXXFLAGS=`"${R_HOME}/bin/R" CMD config CXX17FLAGS` ## for an configure.ac file AC_LANG(C++) 

if C++17 was specified, but using

CXX=`"${R_HOME}/bin/R" CMD config CXX` CXXFLAGS=`"${R_HOME}/bin/R" CMD config CXXFLAGS` ## for an configure.ac file AC_LANG(C++) 

if no standard was specified.

If you want to compile C++ code in a subdirectory, make sure you pass down the macros to specify the appropriate compiler, e.g. in src/Makevars

sublibs: @(cd libs && $(MAKE) \ CXX="$(CXX17) $(CXX17STD)" CXXFLAGS="$(CXX17FLAGS) $(CXX17PICFLAGS)") 

The discussion above is about the standard R ways of compiling C++: it will not apply to packages using src/Makefile or building in a subdirectory that do not set the C++ standard. Do not rely on the compilers’ default C++ standard, which varies widely and gets changed frequently by vendors – for example Apple clang up to at least 16 defaults to C++98, LLVM clang 14–15 to C++14, LLVM clang 16–20 and g++ 11–15 to C++17.

For a package with a src/Makefile (or a Windows analogue), a non-default C++ compiler can be selected by including something like

CXX14 = `"${R_HOME}/bin/R" CMD config CXX14` CXX14STD = `"${R_HOME}/bin/R" CMD config CXX14STD` CXX = ${CXX14} ${CXX14STD} CXXFLAGS = `"${R_HOME}/bin/R" CMD config CXX14FLAGS` CXXPICFLAGS = `"${R_HOME}/bin/R" CMD config CXX14PICFLAGS` SHLIB_LD = "${R_HOME}/bin/R" CMD config SHLIB_CXX14LD` SHLIB_LDFLAGS = "${R_HOME}/bin/R" CMD config SHLIB_CXX14LDFLAGS` 

and ensuring these values are used in relevant compilations, after checking they are non-empty. A common use of src/Makefile is to compile an executable, when likely something like (for example for C++14)

if test -z "$CXX14"; then AC_MSG_ERROR([No C++14 compiler is available]) fi CXX = ${CXX14} ${CXX14STD} CXXFLAGS = ${CXX14FLAGS} 

suffices.

The .so/.dll in a package may need to be linked by the C++ compiler if it or any library it links to contains compiled C++ code. Dynamic linking usually brings in the C++ runtime library (commonly libstdc++ but can be, for example, libc++) but static linking (as used for external libraries on Windows and macOS) will not. R CMD INSTALL will link with the C++ compiler if there are any top-level C++ files in src, but not if these are all in subdirectories. The simplest way to force linking by the C++ compiler is to include an empty C++ file in src..

1.2.5 C standards ¶

C has had standards C89/C90, C99, C11, C17 (also known as C18), and C23 (published in 2024). C11 was a minor change to C99 which introduced some new features and made others optional, and C17 is a ‘bug-fix’ update to C11. On the other hand, C23 makes extensive changes, including making bool, true and false reserved words, finally disallowing K&R-style function declarations and changing the formerly deprecated meaning of function declarations with an empty parameter list to now mean no parameters.⁵³(There are many other additions: see for example https://en.cppreference.com/w/c/23.)

As from R 4.5.0, R’s configure script chooses a compiler option which selects C23 if one is available. Some compilers (including gcc 15) default to C23 and most others from 2022/3 and later have such an option.

The configure script in recent previous versions of R aimed to choose a C compiler which supported C11: as the default in recent versions of gcc (prior to 15), LLVM clang and Apple clang is C17, that is what is likely to be chosen. On the other hand, until R 4.3.0 the makefiles for the Windows build specified C99 and up to R 4.4.3 used the compiler default which for the recommended compiler was C17.

Packages may want to either avoid or embrace the changes in C23, and can do so via specifying ‘USE_Cnn’ for 17, 23, 90 or 99 in the ‘SystemRequirements’ field of their DESCRIPTION file of a package depending on ‘R (>= 4.3.0)’. Those using a configure script should set the corresponding compiler and flags, for example using

CC=`"${R_HOME}/bin/R" CMD config CC23` CFLAGS=`"${R_HOME}/bin/R" CMD config C23FLAGS` CPPFLAGS=`"${R_HOME}/bin/R" CMD config CPPFLAGS` LDFLAGS=`"${R_HOME}/bin/R" CMD config LDFLAGS` 

However, not all platforms will have a C23 compiler: the first line here will give an empty value if no C23 compiler was found.

The (claimed) C standard in use can be checked by the macro __STDC_VERSION__. This is undefined in C89/C90 and should have values 199901L, 201112L and 201710L for C99, C11 and C17. The definitive value for C23 is 202311L but some compilers⁵⁴ are currently using 202000L and requiring the standard to be specified as c2x. C23 has macros similar to C++ ‘feature tests’ for many of its changes, for example __STDC_VERSION_LIMITS_H__.

However, note the ‘claimed’ as no compiler had 100% conformance, and it is better to use configure to test for the feature you want to use than to condition on the value of __STDC_VERSION__. In particular, C11 alignment functionality such as _Alignas and aligned_alloc is not implemented on Windows.

End users installing a source package can specify a standard by something like R CMD INSTALL --use-C17. This overrides the ‘SystemRequirements’ field, but not any configure file.

1.2.6 Using cmake ¶

Packages often wish to include the sources of other software and compile that for inclusion in their .so or .dll, which is normally done by including (or unpacking) the sources in a subdirectory of src, as considered above.

Further issues arise when the external software uses another build system such as cmake, principally to ensure that all the settings for compilers, include and load paths etc are made. This section has already mentioned the need to set at least some of

CC CFLAGS CXX CXXFLAGS CPPFLAGS LDFLAGS 

CFLAGS and CXXFLAGS will need to include CPICFLAGS and CXXPICFLAGS respectively unless (as below) cmake is asked to generate PIC code.

Setting these (and more) as environment variables controls the behaviour of cmake (https://cmake.org/cmake/help/latest/manual/cmake-env-variables.7.html#manual:cmake-env-variables(7)), but it may be desirable to translate these into native settings such as

CMAKE_C_COMPILER CMAKE_C_FLAGS CMAKE_CXX_COMPILER CMAKE_CXX_FLAGS CMAKE_INCLUDE_PATH CMAKE_LIBRARY_PATH CMAKE_SHARED_LINKER_FLAGS_INIT CMAKE_OSX_DEPLOYMENT_TARGET 

and it is often necessary to ensure a static library of PIC code is built by

-DBUILD_SHARED_LIBS:bool=OFF -DCMAKE_POSITION_INDEPENDENT_CODE:bool=ON 

If R is to be detected or used, this must be the build being used for package installation – "${R_HOME}"/bin/R.

To fix ideas, consider a package with sources for a library myLib under src/libs. Two approaches have been used. It is often most convenient to build the external software in a directory other than its sources (particularly during development when the build directory can be removed between builds rather than attempting to clean the sources) – this is illustrated in the first approach.

1. Use the package’s configure script to create a static library src/build/libmyLib.a. This can then be treated in the same way as external software, for example having in src/Makevars

   PKG_CPPFLAGS = -Ilibs/include PKG_LIBS = build/libmyLib.a 

   (-Lbuild -lmyLib could also be used but this explicit specification avoids any confusion with dynamic libraries of the same name.)

   The configure script will need to contain something like (for C code)

   : ${R_HOME=`R RHOME`} if test -z "${R_HOME}"; then echo "could not determine R_HOME" exit 1 fi CC=`"${R_HOME}/bin/R" CMD config CC` CFLAGS=`"${R_HOME}/bin/R" CMD config CFLAGS` CPPFLAGS=`"${R_HOME}/bin/R" CMD config CPPFLAGS` LDFLAGS=`"${R_HOME}/bin/R" CMD config LDFLAGS` cd src mkdir build && cd build cmake -S ../libs \ -DCMAKE_BUILD_TYPE=Release \ -DBUILD_SHARED_LIBS:bool=OFF \ -DCMAKE_POSITION_INDEPENDENT_CODE:bool=ON ${MAKE} 

2. Use src/Makevars (or src/Makevars.win or Makevars.ucrt) to build within the subdirectory. This could be something like (for C code)

   PKG_CPPFLAGS = -Ilibs/include PKG_LIBS = libs/libmyLib.a $(SHLIB): mylibs mylibs: (cd libs; \ CC="$(CC)" CFLAGS="$(CFLAGS)" \ CPPFLAGS="$(CPPFLAGS)" LDFLAGS="$(LDFLAGS)" \ cmake . \ -DCMAKE_BUILD_TYPE=Release \ -DBUILD_SHARED_LIBS:bool=OFF \ -DCMAKE_POSITION_INDEPENDENT_CODE:bool=ON; \ $(MAKE)) 

   the compiler and other settings having been set as Make variables by an R makefile included by INSTALL before src/Makevars.

A complication is that on macOS cmake (where installed) is commonly not on the path but at /Applications/CMake.app/Contents/bin/cmake. One way to work around this is for the package’s configure script to include

if test -z "$CMAKE"; then CMAKE="`which cmake`"; fi if test -z "$CMAKE"; then CMAKE=/Applications/CMake.app/Contents/bin/cmake; fi if test -f "$CMAKE"; then echo "no 'cmake' command found"; exit 1; fi 

and for the second approach to substitute CMAKE into src/Makevars. This also applies to the ancillary command ctest, if used.

1.3.1 Checking packages ¶

Using R CMD check, the R package checker, one can test whether source R packages work correctly. It can be run on one or more directories, or compressed package tar archives with extension .tar.gz, .tgz, .tar.bz2 or .tar.xz.

It is strongly recommended that the final checks are run on a tar archive prepared by R CMD build.

This runs a series of checks, including

1. The package is installed. This will warn about missing cross-references and duplicate aliases in help files.
2. The file names are checked to be valid across file systems and supported operating system platforms.
3. The files and directories are checked for sufficient permissions (Unix-alikes only).
4. The files are checked for binary executables, using a suitable version of file if available⁵⁶. (There may be rare false positives.)
5. The DESCRIPTION file is checked for completeness, and some of its entries for correctness. Unless installation tests are skipped, checking is aborted if the package dependencies cannot be resolved at run time. (You may need to set R_LIBS in the environment if dependent packages are in a separate library tree.) One check is that the package name is not that of a standard package, nor one of the defunct standard packages (‘ctest’, ‘eda’, ‘lqs’, ‘mle’, ‘modreg’, ‘mva’, ‘nls’, ‘stepfun’ and ‘ts’). Another check is that all packages mentioned in library or requires or from which the NAMESPACE file imports or are called via :: or ::: are listed (in ‘Depends’, ‘Imports’, ‘Suggests’): this is not an exhaustive check of the actual imports.
6. Available index information (in particular, for demos and vignettes) is checked for completeness.
7. The package subdirectories are checked for suitable file names and for not being empty. The checks on file names are controlled by the option --check-subdirs=value. This defaults to ‘default’, which runs the checks only if checking a tarball: the default can be overridden by specifying the value as ‘yes’ or ‘no’. Further, the check on the src directory is only run if the package does not contain a configure script (which corresponds to the value ‘yes-maybe’) and there is no src/Makefile or src/Makefile.in.

   To allow a configure script to generate suitable files, files ending in ‘.in’ will be allowed in the R directory.

   A warning is given for directory names that look like R package check directories – many packages have been submitted to CRAN containing these.

8. The R files are checked for syntax errors. Bytes which are non-ASCII are reported as warnings, but these should be regarded as errors unless it is known that the package will always be used in the same locale.
9. It is checked that the package can be loaded, first with the usual default packages and then only with package base already loaded. It is checked that the namespace can be loaded in an empty session with only the base namespace loaded. (Namespaces and packages can be loaded very early in the session, before the default packages are available, so packages should work then.)
10. The R files are checked for correct calls to library.dynam. Package startup functions are checked for correct argument lists and (incorrect) calls to functions which modify the search path or inappropriately generate messages. The R code is checked for possible problems using codetools. In addition, it is checked whether S3 methods have all the arguments of the corresponding generic, and whether the final argument of replacement functions is called ‘value’. All foreign function calls (.C, .Fortran, .Call and .External calls) are tested to see if they have a PACKAGE argument, and if not, whether the appropriate DLL might be deduced from the namespace of the package. Any other calls are reported. (The check is generous, and users may want to supplement this by examining the output of tools::checkFF("mypkg", verbose=TRUE), especially if the intention were to always use a PACKAGE argument)
11. The Rd files are checked for correct syntax and metadata, including the presence of the mandatory fields (\name, \alias, \title and \description). The Rd name and title are checked for being non-empty, and there is a check for missing cross-references (links).
12. A check is made for missing documentation entries, such as undocumented user-level objects in the package.
13. Documentation for functions, data sets, and S4 classes is checked for consistency with the corresponding code.
14. It is checked whether all function arguments given in \usage sections of Rd files are documented in the corresponding \arguments section.
15. The data directory is checked for non-ASCII characters and for the use of reasonable levels of compression.
16. C, C++ and Fortran source and header files⁵⁷ are tested for portable (LF-only) line endings. If there is a Makefile or Makefile.in or Makevars or Makevars.in file under the src directory, it is checked for portable line endings and the correct use of ‘$(BLAS_LIBS)’ and ‘$(LAPACK_LIBS)’

    Compiled code is checked for symbols corresponding to functions which might terminate R or write to stdout/stderr instead of the console. Note that the latter might give false positives in that the symbols might be pulled in with external libraries and could never be called. Windows⁵⁸ users should note that the Fortran and C++ runtime libraries are examples of such external libraries.

17. Some checks are made of the contents of the inst/doc directory. These always include checking for files that look like leftovers, and if suitable tools (such as qpdf) are available, checking that the PDF documentation is of minimal size.
18. The examples provided by the package’s documentation are run. (see Writing R documentation files, for information on using \examples to create executable example code.) If there is a file tests/Examples/pkg-Ex.Rout.save, the output of running the examples is compared to that file.

    Of course, released packages should be able to run at least their own examples. Each example is run in a ‘clean’ environment (so earlier examples cannot be assumed to have been run), and with the variables T and F redefined to generate an error unless they are set in the example: See Logical vectors in An Introduction to R.

19. If the package sources contain a tests directory then the tests specified in that directory are run. (Typically they will consist of a set of .R source files and target output files .Rout.save.) Please note that the comparison will be done in the end user’s locale, so the target output files should be ASCII if at all possible. (The command line option --test-dir=foo may be used to specify tests in a non-standard location. For example, unusually slow tests could be placed in inst/slowTests and then R CMD check --test-dir=inst/slowTests would be used to run them. Other names that have been suggested are, for example, inst/testWithOracle for tests that require Oracle to be installed, inst/randomTests for tests which use random values and may occasionally fail by chance, etc.)
20. The R code in package vignettes (see Writing package vignettes) is executed, and the vignettes re-made from their sources as a check of completeness of the sources (unless there is a ‘BuildVignettes’ field in the package’s DESCRIPTION file with a false value). If there is a target output file .Rout.save in the vignette source directory, the output from running the code in that vignette is compared with the target output file and any differences are reported (but not recorded in the log file). (If the vignette sources are in the deprecated location inst/doc, do mark such target output files to not be installed in .Rinstignore.)

    If there is an error⁵⁹ in executing the R code in vignette foo.ext, a log file foo.ext.log is created in the check directory. The vignettes are re-made in a copy of the package sources in the vign_test subdirectory of the check directory, so for further information on errors look in directory pkgname/vign_test/vignettes. (It is only retained if there are errors or if environment variable _R_CHECK_CLEAN_VIGN_TEST_ is set to a false value.)

21. The PDF version of the package’s manual is created (to check that the Rd files can be converted successfully). This needs LaTeX and suitable fonts and LaTeX packages to be installed. See Making the manuals in R Installation and Administration for further details.
22. Optionally (including by R CMD check --as-cran) the HTML version of the manual is created and checked for compliance with the HTML5 standard. This requires a recent version⁶⁰ of ‘HTML Tidy’, either on the path or at a location specified by environment variable R_TIDYCMD. Up-to-date versions can be installed from http://binaries.html-tidy.org/.

All these tests are run with collation set to the C locale, and for the examples and tests with environment variable LANGUAGE=en: this is to minimize differences between platforms.

Use R CMD check --help to obtain more information about the usage of the R package checker. A subset of the checking steps can be selected by adding command-line options. It also allows customization by setting environment variables _R_CHECK_*_ as described in Tools in R Internals: a set of these customizations similar to those used by CRAN can be selected by the option --as-cran (which works best if Internet access is available). Some Windows users may need to set environment variable R_WIN_NO_JUNCTIONS to a non-empty value. The test of cyclic declarations⁶¹in DESCRIPTION files needs repositories (including CRAN) set: do this in ~/.Rprofile, by e.g.

options(repos = c(CRAN="https://cran.r-project.org")) 

One check customization which can be revealing is

_R_CHECK_CODETOOLS_PROFILE_="suppressLocalUnused=FALSE" 

which reports unused local assignments. Not only does this point out computations which are unnecessary because their results are unused, it also can uncover errors. (Two such are to intend to update an object by assigning a value but mistype its name or assign in the wrong scope, for example using <- where <<- was intended.) This can give false positives, most commonly because of non-standard evaluation for formulae and because the intention is to return objects in the environment of a function for later use.

Complete checking of a package which contains a file README.md needs a reasonably current version of pandoc installed: see https://pandoc.org/installing.html.

You do need to ensure that the package is checked in a suitable locale if it contains non-ASCII characters. Such packages are likely to fail some of the checks in a C locale, and R CMD check will warn if it spots the problem. You should be able to check any package in a UTF-8 locale (if one is available). Beware that although a C locale is rarely used at a console, it may be the default if logging in remotely or for batch jobs.

Often R CMD check will need to consult a CRAN repository to check details of uninstalled packages. Normally this defaults to the CRAN main site, but a mirror can be specified by setting environment variables R_CRAN_WEB and (rarely needed) R_CRAN_SRC to the URL of a CRAN mirror.

It is possible to install a package and then check the installed package. To do so first install the package and keep a log of the installation:

R CMD INSTALL -l libdir pkg > pkg.log 2>&1 

and then use

Rdev CMD check -l libdir --install=check:pkg.log pkg 

(Specifying the library is required: it ensures that the just-installed package is the one checked. If you know for sure only one copy is installed you can use --install=skip: this is used for R installation’s make check-recommended.)

1.3.2 Building package tarballs ¶

Packages may be distributed in source form as “tarballs” (.tar.gz files) or in binary form. The source form can be installed on all platforms with suitable tools and is the usual form for Unix-like systems; the binary form is platform-specific, and is the more common distribution form for the macOS and ‘x86_64’ Windows platforms.

Using R CMD build, the R package builder, one can build R package tarballs from their sources (for example, for subsequent release). It is recommended that packages are built for release by the current release version of R or ‘r-patched’, to avoid inadvertently picking up new features of a development version of R.

Prior to actually building the package in the standard gzipped tar file format, a few diagnostic checks and cleanups are performed. In particular, it is tested whether object indices exist and can be assumed to be up-to-date, and C, C++ and Fortran source files and relevant makefiles in a src directory are tested and converted to LF line-endings if necessary.

Run-time checks whether the package works correctly should be performed using R CMD check prior to invoking the final build procedure.

To exclude files from being put into the package, one can specify a list of exclude patterns in file .Rbuildignore in the top-level source directory. These patterns should be Perl-like regular expressions (see the help for regexp in R for the precise details), one per line, to be matched case-insensitively against the file and directory names relative to the top-level package source directory. In addition, directories from source control systems⁶² or from eclipse⁶³, directories with names check, chm, or ending .Rcheck or Old or old and files GNUMakefile⁶⁴, Read-and-delete-me or with base names starting with ‘.#’, or starting and ending with ‘#’, or ending in ‘~’, ‘.bak’ or ‘.swp’, are excluded by default⁶⁵. In addition, same-package tarballs (from previous builds) and their binary forms will be excluded from the top-level directory, as well as those files in the R, demo and man directories which are flagged by R CMD check as having invalid names.

Use R CMD build --help to obtain more information about the usage of the R package builder.

Unless R CMD build is invoked with the --no-build-vignettes option (or the package’s DESCRIPTION contains ‘BuildVignettes: no’ or similar), it will attempt to (re)build the vignettes (see Writing package vignettes) in the package. To do so it installs the current package into a temporary library tree, but any dependent packages need to be installed in an available library tree (see the Note: at the top of this section).

Similarly, if the .Rd documentation files contain any \Sexpr macros (see Dynamic pages), the package will be temporarily installed to execute them. Post-execution binary copies of those pages containing build-time macros will be saved in build/partial.rdb. If there are any install-time or render-time macros, a .pdf version of the package manual will be built and installed in the build subdirectory. (This allows CRAN or other repositories to display the manual even if they are unable to install the package.) This can be suppressed by the option --no-manual or if package’s DESCRIPTION contains ‘BuildManual: no’ or similar.

One of the checks that R CMD build runs is for empty source directories. These are in most (but not all) cases unintentional, if they are intentional use the option --keep-empty-dirs (or set the environment variable _R_BUILD_KEEP_EMPTY_DIRS_ to ‘TRUE’, or have a ‘BuildKeepEmpty’ field with a true value in the DESCRIPTION file).

The --resave-data option allows saved images (.rda and .RData files) in the data directory to be optimized for size. It will also compress tabular files and convert .R files to saved images. It can take values no, gzip (the default if this option is not supplied, which can be changed by setting the environment variable _R_BUILD_RESAVE_DATA_) and best (equivalent to giving it without a value), which chooses the most effective compression. Using best adds a dependence on R (>= 2.10) to the DESCRIPTION file if bzip2 or xz compression is selected for any of the files. If this is thought undesirable, --resave-data=gzip (which is the default if that option is not supplied) will do what compression it can with gzip. A package can control how its data is resaved by supplying a ‘BuildResaveData’ field (with one of the values given earlier in this paragraph) in its DESCRIPTION file.

The --compact-vignettes option will run tools::compactPDF over the PDF files in inst/doc (and its subdirectories) to losslessly compress them. This is not enabled by default (it can be selected by environment variable _R_BUILD_COMPACT_VIGNETTES_) and needs qpdf (https://qpdf.sourceforge.io/) to be available.

It can be useful to run R CMD check --check-subdirs=yes on the built tarball as a final check on the contents.

Where a non-POSIX file system is in use which does not utilize execute permissions, some care is needed with permissions. This applies on Windows and to e.g. FAT-formatted drives and SMB-mounted file systems on other OSes. The ‘mode’ of the file recorded in the tarball will be whatever file.info() returns. On Windows this will record only directories as having execute permission and on other OSes it is likely that all files have reported ‘mode’ 0777. A particular issue is packages being built on Windows which are intended to contain executable scripts such as configure and cleanup: R CMD build ensures those two are recorded with execute permission.

Directory build of the package sources is reserved for use by R CMD build: it contains information which may not easily be created when the package is installed, including index information on the vignettes and, rarely, information on the help pages and perhaps a copy of the PDF reference manual (see above).

1.3.3 Building binary packages ¶

Binary packages are compressed copies of installed versions of packages. They contain compiled shared libraries rather than C, C++ or Fortran source code, and the R functions are included in their installed form. The format and filename are platform-specific; for example, a binary package for Windows is usually supplied as a .zip file, and for the macOS platform the default binary package file extension is .tgz.

The recommended method of building binary packages is to use

R CMD INSTALL --build pkg

where pkg is either the name of a source tarball (in the usual .tar.gz format) or the location of the directory of the package source to be built. This operates by first installing the package and then packing the installed binaries into the appropriate binary package file for the particular platform.

By default, R CMD INSTALL --build will attempt to install the package into the default library tree for the local installation of R. This has two implications:

• If the installation is successful, it will overwrite any existing installation of the same package.
• The default library tree must have write permission; if not, the package will not install and the binary will not be created.

To prevent changes to the present working installation or to provide an install location with write access, create a suitably located directory with write access and use the -l option to build the package in the chosen location. The usage is then

R CMD INSTALL -l location --build pkg

where location is the chosen directory with write access. The package will be installed as a subdirectory of location, and the package binary will be created in the current directory.

Other options for R CMD INSTALL can be found using R CMD INSTALL --help, and platform-specific details for special cases are discussed in the platform-specific FAQs.

Finally, at least one web-based service is available for building binary packages from (checked) source code: WinBuilder (see https://win-builder.R-project.org/) is able to build ‘x86_64’ Windows binaries. Note that this is intended for developers on other platforms who do not have access to Windows but wish to provide binaries for the Windows platform.

1.4.1 Encodings and vignettes ¶

Vignettes will in general include descriptive text, R input, R output and figures, LaTeX include files and bibliographic references. As any of these may contain non-ASCII characters, the handling of encodings can become very complicated.

The vignette source file should be written in ASCII or contain a declaration of the encoding (see below). This applies even to comments within the source file, since vignette engines process comments to look for options and metadata lines. When an engine’s weave and tangle functions are called on the vignette source, it will be converted to the encoding of the current R session.

Stangle() will produce an R code file in the current locale’s encoding: for a non-ASCII vignette what that is is recorded in a comment at the top of the file.

Sweave() will produce a .tex file in the current encoding, or in UTF-8 if that is declared. Non-ASCII encodings need to be declared to LaTeX via a line like

\usepackage[utf8]{inputenc} 

(It is also possible to use the more recent ‘inputenx’ LaTeX package.) For files where this line is not needed (e.g. chapters included within the body of a larger document, or non-Sweave vignettes), the encoding may be declared using a comment like

%\VignetteEncoding{UTF-8} 

If the encoding is UTF-8, this can also be declared using the declaration

%\SweaveUTF8 

If no declaration is given in the vignette, it will be assumed to be in the encoding declared for the package. If there is no encoding declared in either place, then it is an error to use non-ASCII characters in the vignette.

In any case, be aware that LaTeX may require the ‘usepackage’ declaration.

Sweave() will also parse and evaluate the R code in each chunk. The R output will also be in the current locale (or UTF-8 if so declared), and should be covered by the ‘inputenc’ declaration. One thing people often forget is that the R output may not be ASCII even for ASCII R sources, for many possible reasons. One common one is the use of ‘fancy’ quotes: see the R help on sQuote: note carefully that it is not portable to declare UTF-8 or CP1252 to cover such quotes, as their encoding will depend on the locale used to run Sweave(): this can be circumvented by setting options(useFancyQuotes="UTF-8") in the vignette.

The final issue is the encoding of figures – this applies only to PDF figures and not PNG etc. The PDF figures will contain declarations for their encoding, but the Sweave option pdf.encoding may need to be set appropriately: see the help for the pdf() graphics device.

As a real example of the complexities, consider the fortunes package version ‘1.4-0’. That package did not have a declared encoding, and its vignette was in ASCII. However, the data it displays are read from a UTF-8 CSV file and will be assumed to be in the current encoding, so fortunes.tex will be in UTF-8 in any locale. Had read.table been told the data were UTF-8, fortunes.tex would have been in the locale’s encoding.

1.4.2 Non-Sweave vignettes ¶

Vignettes in formats other than Sweave are supported via “vignette engines”. For example knitr version 1.1 or later can create .tex files from a variation on Sweave format, and .html files from a variation on “markdown” format. These engines replace the Sweave() function with other functions to convert vignette source files into LaTeX files for processing into .pdf, or directly into .pdf or .html files. The Stangle() function is replaced with a function that extracts the R source from a vignette.

R recognizes non-Sweave vignettes using filename extensions specified by the engine. For example, the knitr package supports the extension .Rmd (standing for “R markdown”). The user indicates the vignette engine within the vignette source using a \VignetteEngine line, for example

%\VignetteEngine{knitr::knitr} 

This specifies the name of a package and an engine to use in place of Sweave in processing the vignette. As Sweave is the only engine supplied with the R distribution, the package providing any other engine must be specified in the ‘VignetteBuilder’ field of the package DESCRIPTION file, and also specified in the ‘Suggests’, ‘Imports’ or ‘Depends’ field (since its namespace must be available to build or check your package). If more than one package is specified as a builder, they will be searched in the order given there. The utils package is always implicitly appended to the list of builder packages, but may be included earlier to change the search order.

Note that a package with non-Sweave vignettes should always have a ‘VignetteBuilder’ field in the DESCRIPTION file, since this is how R CMD check recognizes that there are vignettes to be checked: packages listed there are required when the package is checked.

The vignette engine can produce .tex, .pdf, or .html files as output. If it produces .tex files, R will call texi2pdf to convert them to .pdf for display to the user (unless there is a Makefile in the vignettes directory).

Package writers who would like to supply vignette engines need to register those engines in the package .onLoad function. For example, that function could make the call

tools::vignetteEngine("knitr", weave = vweave, tangle = vtangle, pattern = "[.]Rmd$", package = "knitr") 

(The actual registration in knitr is more complicated, because it supports other input formats.) See the ?tools::vignetteEngine help topic for details on engine registration.

1.5.1 Specifying imports and exports ¶

Exports are specified using the export directive in the NAMESPACE file. A directive of the form

export(f, g) 

specifies that the variables f and g are to be exported. (Note that variable names may be quoted, and reserved words and non-standard names such as [<-.fractions must be.)

For packages with many variables to export it may be more convenient to specify the names to export with a regular expression using exportPattern. The directive

exportPattern("^[^.]") 

exports all variables that do not start with a period. However, such broad patterns are not recommended for production code: it is better to list all exports or use narrowly-defined groups. (This pattern applies to S4 classes.) Beware of patterns which include names starting with a period: some of these are internal-only variables and should never be exported, e.g. ‘.__S3MethodsTable__.’ (and loading excludes known cases).

Packages implicitly import the base namespace. Variables exported from other packages with namespaces need to be imported explicitly using the directives import and importFrom. The import directive imports all exported variables from the specified package(s). Thus the directives

import(foo, bar) 

specifies that all exported variables in the packages foo and bar are to be imported. If only some of the exported variables from a package are needed, then they can be imported using importFrom. The directive

importFrom(foo, f, g) 

specifies that the exported variables f and g of the package foo are to be imported. Using importFrom selectively rather than import is good practice and recommended notably when importing from packages with more than a dozen exports and especially from those written by others (so what they export can change in future).

To import every symbol from a package but for a few exceptions, pass the except argument to import. The directive

import(foo, except=c(bar, baz)) 

imports every symbol from foo except bar and baz. The value of except should evaluate to something coercible to a character vector, after substituting each symbol for its corresponding string.

It is possible to export variables from a namespace which it has imported from other namespaces: this has to be done explicitly and not via exportPattern.

If a package only needs a few objects from another package it can use a fully qualified variable reference in the code instead of a formal import. A fully-qualified reference to the function f in package foo is of the form foo::f. This is slightly less efficient than a formal import and also loses the advantage of recording all dependencies in the NAMESPACE file (but they still need to be recorded in the DESCRIPTION file). Evaluating foo::f will cause package foo to be loaded, but not attached, if it was not loaded already—this can be an advantage in delaying the loading of a rarely used package. However, if foo is listed only in ‘Suggests’ or ‘Enhances’ this also delays the check that it is installed: it is good practice to use such imports conditionally (e.g. via requireNamespace("foo", quietly = TRUE)).

Using the foo::f form will be necessary when a package needs to use a function of the same name from more than one namespace.

Using foo:::f instead of foo::f allows access to unexported objects. This is generally not recommended, as the existence or semantics of unexported objects may be changed by the package author in routine maintenance.

1.5.2 Registering S3 methods ¶

The standard method for S3-style UseMethod dispatching might fail to locate methods defined in a package that is imported but not attached to the search path. To ensure that these methods are available the packages defining the methods should ensure that the generics are imported and register the methods using S3method directives. If a package defines a function print.foo intended to be used as a print method for class foo, then the directive

S3method(print, foo) 

ensures that the method is registered and available for UseMethod dispatch, and the function print.foo does not need to be exported. Since the generic print is defined in base it does not need to be imported explicitly.

(Note that function and class names may be quoted, and reserved words and non-standard names such as [<- and function must be.)

It is possible to specify a third argument to S3method, the function to be used as the method, for example

S3method(print, check_so_symbols, .print.via.format) 

when print.check_so_symbols is not needed.

As from R 3.6.0 one can also use S3method() directives to perform delayed registration. With

if(getRversion() >= "3.6.0") { S3method(pkg::gen, cls) } 

function gen.cls will get registered as an S3 method for class cls and generic gen from package pkg only when the namespace of pkg is loaded. This can be employed to deal with situations where the method is not “immediately” needed, and having to pre-load the namespace of pkg (and all its strong dependencies) in order to perform immediate registration is considered too onerous.

1.5.3 Load hooks ¶

There are a number of hooks called as packages are loaded, attached, detached, and unloaded. See help(".onLoad") for more details.

Since loading and attaching are distinct operations, separate hooks are provided for each. These hook functions are called .onLoad and .onAttach. They both take arguments⁷¹ libname and pkgname; they should be defined in the namespace but not exported.

Packages can use a .onDetach or .Last.lib function (provided the latter is exported from the namespace) when detach is called on the package. It is called with a single argument, the full path to the installed package. There is also a hook .onUnload which is called when the namespace is unloaded (via a call to unloadNamespace, perhaps called by detach(unload = TRUE)) with argument the full path to the installed package’s directory. Functions .onUnload and .onDetach should be defined in the namespace and not exported, but .Last.lib does need to be exported.

Packages are not likely to need .onAttach (except perhaps for a start-up banner); code to set options and load shared objects should be placed in a .onLoad function, or use made of the useDynLib directive described next.

User-level hooks are also available: see the help on function setHook.

These hooks are often used incorrectly. People forget to export .Last.lib. Compiled code should be loaded in .onLoad (or via a useDynLb directive: see below) and unloaded in .onUnload. Do remember that a package’s namespace can be loaded without the namespace being attached (e.g. by pkgname::fun) and that a package can be detached and re-attached whilst its namespace remains loaded.

It is good practice for these functions to be quiet. Any messages should use packageStartupMessage so users (include check scripts) can suppress them if desired.

1.5.4 useDynLib ¶

A NAMESPACE file can contain one or more useDynLib directives which allows shared objects that need to be loaded.⁷² The directive

useDynLib(foo) 

registers the shared object foo⁷³ for loading with library.dynam. Loading of registered object(s) occurs after the package code has been loaded and before running the load hook function. Packages that would only need a load hook function to load a shared object can use the useDynLib directive instead.

The useDynLib directive also accepts the names of the native routines that are to be used in R via the .C, .Call, .Fortran and .External interface functions. These are given as additional arguments to the directive, for example,

useDynLib(foo, myRoutine, myOtherRoutine) 

By specifying these names in the useDynLib directive, the native symbols are resolved when the package is loaded and R variables identifying these symbols are added to the package’s namespace with these names. These can be used in the .C, .Call, .Fortran and .External calls in place of the name of the routine and the PACKAGE argument. For instance, we can call the routine myRoutine from R with the code

 .Call(myRoutine, x, y) 

rather than

 .Call("myRoutine", x, y, PACKAGE = "foo") 

There are at least two benefits to this approach. Firstly, the symbol lookup is done just once for each symbol rather than each time the routine is invoked. Secondly, this removes any ambiguity in resolving symbols that might be present in more than one DLL. However, this approach is nowadays deprecated in favour of supplying registration information (see below).

In some circumstances, there will already be an R variable in the package with the same name as a native symbol. For example, we may have an R function in the package named myRoutine. In this case, it is necessary to map the native symbol to a different R variable name. This can be done in the useDynLib directive by using named arguments. For instance, to map the native symbol name myRoutine to the R variable myRoutine_sym, we would use

useDynLib(foo, myRoutine_sym = myRoutine, myOtherRoutine) 

We could then call that routine from R using the command

 .Call(myRoutine_sym, x, y) 

Symbols without explicit names are assigned to the R variable with that name.

In some cases, it may be preferable not to create R variables in the package’s namespace that identify the native routines. It may be too costly to compute these for many routines when the package is loaded if many of these routines are not likely to be used. In this case, one can still perform the symbol resolution correctly using the DLL, but do this each time the routine is called. Given a reference to the DLL as an R variable, say dll, we can call the routine myRoutine using the expression

 .Call(dll$myRoutine, x, y) 

The $ operator resolves the routine with the given name in the DLL using a call to getNativeSymbol. This is the same computation as above where we resolve the symbol when the package is loaded. The only difference is that this is done each time in the case of dll$myRoutine.

In order to use this dynamic approach (e.g., dll$myRoutine), one needs the reference to the DLL as an R variable in the package. The DLL can be assigned to a variable by using the variable = dllName format used above for mapping symbols to R variables. For example, if we wanted to assign the DLL reference for the DLL foo in the example above to the variable myDLL, we would use the following directive in the NAMESPACE file:

myDLL = useDynLib(foo, myRoutine_sym = myRoutine, myOtherRoutine) 

Then, the R variable myDLL is in the package’s namespace and available for calls such as myDLL$dynRoutine to access routines that are not explicitly resolved at load time.

If the package has registration information (see Registering native routines), then we can use that directly rather than specifying the list of symbols again in the useDynLib directive in the NAMESPACE file. Each routine in the registration information is specified by giving a name by which the routine is to be specified along with the address of the routine and any information about the number and type of the parameters. Using the .registration argument of useDynLib, we can instruct the namespace mechanism to create R variables for these symbols. For example, suppose we have the following registration information for a DLL named myDLL:

static R_NativePrimitiveArgType foo_t[] = { REALSXP, INTSXP, STRSXP, LGLSXP }; static const R_CMethodDef cMethods[] = { {"foo", (DL_FUNC) &foo, 4, foo_t}, {"bar_sym", (DL_FUNC) &bar, 0}, {NULL, NULL, 0, NULL} }; static const R_CallMethodDef callMethods[] = { {"R_call_sym", (DL_FUNC) &R_call, 4}, {"R_version_sym", (DL_FUNC) &R_version, 0}, {NULL, NULL, 0} }; 

Then, the directive in the NAMESPACE file

useDynLib(myDLL, .registration = TRUE) 

causes the DLL to be loaded and also for the R variables foo, bar_sym, R_call_sym and R_version_sym to be defined in the package’s namespace.

Note that the names for the R variables are taken from the entry in the registration information and do not need to be the same as the name of the native routine. This allows the creator of the registration information to map the native symbols to non-conflicting variable names in R, e.g. R_version to R_version_sym for use in an R function such as

R_version <- function() { .Call(R_version_sym) } 

Using argument .fixes allows an automatic prefix to be added to the registered symbols, which can be useful when working with an existing package. For example, package KernSmooth has

useDynLib(KernSmooth, .registration = TRUE, .fixes = "F_") 

which makes the R variables corresponding to the Fortran symbols F_bkde and so on, and so avoid clashes with R code in the namespace.

NB: Using these arguments for a package which does not register native symbols merely slows down the package loading (although many CRAN packages have done so). Once symbols are registered, check that the corresponding R variables are not accidentally exported by a pattern in the NAMESPACE file.

1.5.5 An example ¶

As an example consider two packages named foo and bar. The R code for package foo in file foo.R is

x <- 1 f <- function(y) c(x,y) foo <- function(x) .Call("foo", x, PACKAGE="foo") print.foo <- function(x, ...) cat("<a foo>\n")

Some C code defines a C function compiled into DLL foo (with an appropriate extension). The NAMESPACE file for this package is

useDynLib(foo) export(f, foo) S3method(print, foo)

The second package bar has code file bar.R

c <- function(...) sum(...) g <- function(y) f(c(y, 7)) h <- function(y) y+9

and NAMESPACE file

import(foo) export(g, h)

Calling library(bar) loads bar and attaches its exports to the search path. Package foo is also loaded but not attached to the search path. A call to g produces

> g(6) [1] 1 13 

This is consistent with the definitions of c in the two settings: in bar the function c is defined to be equivalent to sum, but in foo the variable c refers to the standard function c in base.

1.5.6 Namespaces with S4 classes and methods ¶

Some additional steps are needed for packages which make use of formal (S4-style) classes and methods (unless these are purely used internally). The package should have Depends: methods⁷⁴ in its DESCRIPTION and import(methods) or importFrom(methods, ...) plus any classes and methods which are to be exported need to be declared in the NAMESPACE file. For example, the stats4 package has

export(mle) # exporting methods implicitly exports the generic importFrom("stats", approx, optim, pchisq, predict, qchisq, qnorm, spline) ## For these, we define methods or (AIC, BIC, nobs) an implicit generic: importFrom("stats", AIC, BIC, coef, confint, logLik, nobs, profile, update, vcov) exportClasses(mle, profile.mle, summary.mle) ## All methods for imported generics: exportMethods(coef, confint, logLik, plot, profile, summary, show, update, vcov) ## implicit generics which do not have any methods here export(AIC, BIC, nobs) 

All S4 classes to be used outside the package need to be listed in an exportClasses directive. Alternatively, they can be specified using exportClassPattern⁷⁵ in the same style as for exportPattern. To export methods for generics from other packages an exportMethods directive can be used.

Note that exporting methods on a generic in the namespace will also export the generic, and exporting a generic in the namespace will also export its methods. If the generic function is not local to this package, either because it was imported as a generic function or because the non-generic version has been made generic solely to add S4 methods to it (as for functions such as coef in the example above), it can be declared via either or both of export or exportMethods, but the latter is clearer (and is used in the stats4 example above). In particular, for primitive functions there is no generic function, so export would export the primitive, which makes no sense. On the other hand, if the generic is local to this package, it is more natural to export the function itself using export(), and this must be done if an implicit generic is created without setting any methods for it (as is the case for AIC in stats4).

A non-local generic function is only exported to ensure that calls to the function will dispatch the methods from this package (and that is not done or required when the methods are for primitive functions). For this reason, you do not need to document such implicitly created generic functions, and undoc in package tools will not report them.

If a package uses S4 classes and methods exported from another package, but does not import the entire namespace of the other package⁷⁶, it needs to import the classes and methods explicitly, with directives

importClassesFrom(package, ...) importMethodsFrom(package, ...) 

listing the classes and functions with methods respectively. Suppose we had two small packages A and B with B using A. Then they could have NAMESPACE files

export(f1, ng1) exportMethods("[") exportClasses(c1)

and

importFrom(A, ng1) importClassesFrom(A, c1) importMethodsFrom(A, f1) export(f4, f5) exportMethods(f6, "[") exportClasses(c1, c2)

respectively.

Note that importMethodsFrom will also import any generics defined in the namespace on those methods.

It is important if you export S4 methods that the corresponding generics are available. You may for example need to import coef from stats to make visible a function to be converted into its implicit generic. But it is better practice to make use of the generics exported by stats4 as this enables multiple packages to unambiguously set methods on those generics.

1.6.1 PDF size ¶

There are a several tools available to reduce the size of PDF files: often the size can be reduced substantially with no or minimal loss in quality. Not only do large files take up space: they can stress the PDF viewer and take many minutes to print (if they can be printed at all).

qpdf (https://qpdf.sourceforge.io/) can compress losslessly. It is fairly readily available (e.g. it is included in rtools, has packages in Debian/Ubuntu/Fedora, and is installed as part of the CRAN macOS distribution of R). R CMD build has an option to run qpdf over PDF files under inst/doc and replace them if at least 10Kb and 10% is saved. The full path to the qpdf command can be supplied as environment variable R_QPDF (and is on the CRAN binary of R for macOS). It seems MiKTeX does not use PDF object compression and so qpdf can reduce considerably the sizes of files it outputs: MiKTeX’s defaults can be overridden by code in the preamble of an Sweave or LaTeX file — see how this is done for the R reference manual at https://svn.r-project.org/R/trunk/doc/manual/refman.top.

Other tools can reduce the size of PDFs containing bitmap images at excessively high resolution. These are often best re-generated (for example Sweave defaults to 300 ppi, and 100–150 is more appropriate for a package manual). These tools include Adobe Acrobat (not Reader), Apple’s Preview⁹⁷ and Ghostscript (which converts PDF to PDF by

ps2pdf options -dAutoRotatePages=/None -dPrinted=false in.pdf out.pdf 

and suitable options might be

-dPDFSETTINGS=/ebook -dPDFSETTINGS=/screen 

See https://ghostscript.readthedocs.io/en/latest/VectorDevices.html for more such and consider all the options for image downsampling). There have been examples in CRAN packages for which current versions of Ghostscript produced much bigger reductions than earlier ones (e.g. at the upgrades from 9.50 to 9.52, from 9.55 to 9.56 and then to 10.00.0).

We come across occasionally large PDF files containing excessively complicated figures using PDF vector graphics: such figures are often best redesigned or failing that, output as PNG files.

Option --compact-vignettes to R CMD build defaults to value ‘qpdf’: use ‘both’ to try harder to reduce the size, provided you have Ghostscript available (see the help for tools::compactPDF).

1.6.2 Check timing ¶

There are several ways to find out where time is being spent in the check process. Start by setting the environment variable _R_CHECK_TIMINGS_ to ‘0’. This will report the total CPU times (not Windows) and elapsed times for installation and several checks, including for running examples, tests and vignettes, under each sub-architecture if appropriate. For tests and vignettes, it reports the time for each as well as the total.

Setting _R_CHECK_TIMINGS_ to a positive value sets a threshold (in seconds elapsed time) for reporting timings.

If you need to look in more detail at the timings for examples, use option --timings to R CMD check (this is set by --as-cran). This adds a summary to the check output for all the examples with CPU or elapsed time of more than 5 seconds. It produces a file mypkg.Rcheck/mypkg-Ex.timings containing timings for each help file: it is a tab-delimited file which can be read into R for further analysis.

Timings for the tests and vignette runs are given at the bottom of the corresponding log file: note that log files for successful vignette runs are only retained if environment variable _R_CHECK_ALWAYS_LOG_VIGNETTE_OUTPUT_ is set to a true value.

1.6.3 Encoding issues ¶

The issues in this subsection have been much alleviated by the change in R 4.2.0 to running the Windows port of R in a UTF-8 locale where available. However, Windows users might be running an earlier version of R on an earlier version of Windows which does not support UTF-8 locales.

Care is needed if your package contains non-ASCII text, and in particular if it is intended to be used in more than one locale. It is possible to mark the encoding used in the DESCRIPTION file and in .Rd files, as discussed elsewhere in this manual.

First, consider carefully if you really need non-ASCII text. Some users of R will only be able to view correctly text in their native language group (e.g. Western European, Eastern European, Simplified Chinese) and ASCII.⁹⁸. Other characters may not be rendered at all, rendered incorrectly, or cause your R code to give an error. For .Rd documentation, marking the encoding and including ASCII transliterations is likely to do a reasonable job. The set of characters which is commonly supported is wider than it used to be around 2000, but non-Latin alphabets (Greek, Russian, Georgian, …) are still often problematic and those with double-width characters (Chinese, Japanese, Korean, emoji) often need specialist fonts to render correctly.

Several CRAN packages have messages in their R code in French (and a few in German). A better way to tackle this is to use the internationalization facilities discussed elsewhere in this manual.

Function showNonASCIIfile in package tools can help in finding non-ASCII bytes in files.

There is a portable way to have arbitrary text in character strings (only) in your R code, which is to supply them in Unicode as ‘\uxxxx’ escapes (or, rarely needed except for emojis, ‘\Uxxxxxxxx’ escapes). If there are any characters not in the current encoding the parser will encode the character string as UTF-8 and mark it as such. This applies also to character strings in datasets: they can be prepared using ‘\uxxxx’ escapes or encoded in UTF-8 in a UTF-8 locale, or even converted to UTF-8 via iconv(). If you do this, make sure you have ‘R (>= 2.10)’ (or later) in the ‘Depends’ field of the DESCRIPTION file.

R sessions running in non-UTF-8 locales will if possible re-encode such strings for display (and this is done by RGui on older versions of Windows, for example). Suitable fonts will need to be selected or made available⁹⁹ both for the console/terminal and graphics devices such as ‘X11()’ and ‘windows()’. Using ‘postscript’ or ‘pdf’ will choose a default 8-bit encoding depending on the language of the UTF-8 locale, and your users would need to be told how to select the ‘encoding’ argument.

Note that the previous two paragraphs only apply to character strings in R code. Non-ASCII characters are particularly prevalent in comments (in the R code of the package, in examples, tests, vignettes and even in the NAMESPACE file) but should be avoided there. Most commonly people use the Windows extensions to Latin-1 (often directional single and double quotes, ellipsis, bullet and en and em dashes) which are not supported in strict Latin-1 locales nor in CJK locales on Windows. A surprisingly common misuse is to use a right quote in ‘don't’ instead of the correct apostrophe.

Datasets can include marked UTF-8 or Latin-1 character strings. As R is nowadays unlikely to be run in a Latin-1 or Windows’ CP1252 locale, for performance reasons these should be converted to UTF-8.

If you want to run R CMD check on a Unix-alike over a package that sets a package encoding in its DESCRIPTION file and do not use a UTF-8 locale you may need to specify a suitable locale via environment variable R_ENCODING_LOCALES. The default is equivalent to the value

"latin1=en_US:latin2=pl_PL:UTF-8=en_US.UTF-8:latin9=fr_FR.iso885915@euro" 

(which is appropriate for a system based on glibc: macOS requires latin9=fr_FR.ISO8859-15) except that if the current locale is UTF-8 then the package code is translated to UTF-8 for syntax checking, so it is strongly recommended to check in a UTF-8 locale.

1.6.4 Portable C and C++ code ¶

Writing portable C and C++ code is mainly a matter of observing the standards (C99, C++14 or where declared C++11/17/20) and testing that extensions (such as POSIX functions) are supported. Do make maximal use of your compiler diagnostics — this typically means using flags -Wall and -pedantic for both C and C++ and additionally -Werror=implicit-function-declaration and -Wstrict-prototypes for C (on some platforms and compiler versions) these are part of -Wall or -pedantic).

C++ standards: From version 4.0.0 R required and defaulted to C++11; from R 4.1.0 in defaulted to C++14 and from R 4.3.0 to C++17 (where available). For maximal portability a package should either specify a standard (see Using C++ code) or be tested under all of C++11, C++14 and C++17.

Later C++ standards, notably C++17 remove features deprecated in earlier versions. Unfortunately some compilers, notably g++ have retained these features so if possible test under another compiler (such as that used on macOS).

Note that the ‘TR1’ C++ extensions are not part of any of these standards and the <tr1/name> headers are not supplied by some of the compilers used for R, including on macOS. (Use the C++11 versions instead.)

A common error is to assume recent versions of compilers or OSes. In production environments ‘long term support’ versions of OSes may be in use for many years,¹⁰⁰ and their compilers may not be updated during that time. For example, GCC 4.8 was still in use in 2022 and could be (in RHEL 7) until 2028: that supports neither C++14 nor C++17.

The POSIX standards only require recently-defined functions to be declared if certain macros are defined with large enough values, and on some compiler/OS combinations¹⁰¹ they are not declared otherwise. So you may need to include something like one of

#define _XOPEN_SOURCE 600 

or

#ifdef __GLIBC__ # define _POSIX_C_SOURCE 200809L #endif 

before any headers. (strdup, strncasecmp and strnlen are such functions – there were several older platforms which did not have the POSIX 2008 function strnlen.)

‘Linux’ is not a well-defined operating system: it is a kernel plus a collection of components. Most distributions use glibc to provide most of the C headers and run-time library, but others, notably Alpine Linux, use other implementations such as musl — see https://wiki.musl-libc.org/functional-differences-from-glibc.html.

However, some common errors are worth pointing out here. It can be helpful to look up functions at https://cplusplus.com/reference/ or https://en.cppreference.com/w/ and compare what is defined in the various standards.

More care is needed for functions such as mallinfo which are not specified by any of these standards—hopefully the man page on your system will tell you so. Searching online for such pages for various OSes (preferably at least Linux and macOS, and the FreeBSD manual pages at https://man.freebsd.org/cgi/man.cgi allow you to select many OSes) should reveal useful information but a configure script is likely to be needed to check availability and functionality.

Both the compiler and OS (via system header files, which may differ by architecture even for nominally the same OS) affect the compilability of C/C++ code. Compilers from the GCC, LLVM (clang and flang) Intel and Oracle Developer Studio suites have been used with R, and both LLVM clang and Oracle have more than one implementation of C++ headers and library. The range of possibilities makes comprehensive empirical checking impossible, and regrettably compilers are patchy at best on warning about non-standard code.

• Mathematical functions such as sqrt are defined in C++11 for floating-point arguments: float, double, long double and possibly more. The standard specifies what happens with an argument of integer type but this is not always implemented, resulting in a report of ‘overloading ambiguity’: this was commonly seen on Solaris, but for pow also seen on macOS and other platforms using clang++.

  A not-uncommonly-seen problem is to mistakenly call floor(x/y) or ceil(x/y) for int arguments x and y. Since x/y does integer division, the result is of type int and ‘overloading ambiguity’ may be reported. Some people have (pointlessly) called floor and ceil on arguments of integer type, which may have an ‘overloading ambiguity’.

  A surprising common misuse is things like pow(10, -3): this should be the constant 1e-3. Note that there are constants such as M_SQRT2 defined via Rmath.h¹⁰² for sqrt(2.0), frequently mis-coded as sqrt(2).

• Function fabs is defined only for floating-point types, except in C++11 and later which have overloads for std::fabs in <cmath> for integer types. Function abs is defined in C99’s <stdlib.h> for int and in C++’s <cstdlib> for integer types, overloaded in <cmath> for floating-point types. C++11 has additional overloads for std::abs in <cmath> for integer types. The effect of calling abs with a floating-point type is implementation-specific: it may truncate to an integer. For clarity and to avoid compiler warnings, use abs for integer types and fabs for double values, and when using C++ include <cmath> and use the std:: prefix.
• It is an error (and make little sense, although has been seen) to call macros/functions isnan, isinf and isfinite for integer arguments: a few compilers give a compilation error. Function finite is obsolete, and some compilers will warn about its use¹⁰³.
• The GNU C/C++ compilers support a large number of non-portable extensions. For example, INFINITY (which is a float value in C99 and C++11), for which R provides the portable double value R_PosInf (and R_NegInf for -INFINITY). And NAN¹⁰⁴ is just one NaN float value: for use with R, NA_REAL is often what is intended, but R_NaN is also available.

  Some (but not all) extensions are listed at https://gcc.gnu.org/onlinedocs/gcc/C-Extensions.html and https://gcc.gnu.org/onlinedocs/gcc/C_002b_002b-Extensions.html.

  Other GNU extensions which have bitten package writers are the use of non-portable characters such as ‘$’ in identifiers and use of C++ headers under ext.

• Including C-style headers in C++ code is not portable. Including the legacy header¹⁰⁵ math.h in C++ code may conflict with cmath which may be included by other headers. In C++11, functions like sqrt and isnan are defined for double arguments in math.h and for a range of types including double in cmath. Similar issues have been seen for stdlib.h and cstdlib. Including the C++ header first used to be a sufficient workaround but for some 2016 compilers only one could be included.
• Be careful to include the headers which define the functions you use. Some compilers/OSes include other system headers in their headers which are not required by the standards, and so code may compile on such systems and not on others. (A prominent example is the C++ header <random> which is indirectly included by <algorithm> by g++. Another issue is the C header <time.h> which is included by other headers on Linux and Windows but not macOS.) g++ 11 often needs explicit inclusion of the C++ headers <limits> (for numeric_limits) or <exception> (for set_terminate and similar), whereas earlier versions included these in other headers. g++ 13 requires the explicit inclusion of <cstdint> for types such as uint32_t which was previously included implicitly. (For more such, see https://gcc.gnu.org/gcc-13/porting_to.html.) There are further instances of this in g++ 15: see https://gcc.gnu.org/gcc-13/porting_to.html.

  Note that malloc, calloc, realloc and free are defined by C99 in the header stdlib.h and (in the std:: namespace) by C++ header cstdlib. Some earlier implementations used a header malloc.h, but that is not portable and does not exist on macOS.

  This also applies to types such as ssize_t. The POSIX standards say that is declared in headers unistd.h and sys/types.h, and the latter is often included indirectly by other headers on some but not all systems.

  POSIX mandates the header unistd.h: most but not all OSes supply header sys/unistd.h as a wrapper, so this should not be used.

  Similarly for constants: for example SIZE_MAX is defined in stdint.h alongside size_t.

• Some headers are not portable: we have just mentioned malloc.h and often CRAN submissions attempt to use endian.h. The latter is a glibc extension: some OSes have machine/endian.h or sys/endian.h but some have neither. Header execinfo.h is only available on a few OSes: formerly nor in MacOS nor Solaris, and currently not on Linux systems (such as Alpine Linux) using musl. Nor is header fpu_control.h available on macOS nor musl.
• Use #include "my.h" not #include <my.h> for headers in your package. The second form is intended for system headers and the search order for such headers is platform-dependent (and may not include the current directory). For extra safety, name headers in a way that cannot be confused with a system header so not, for example, types.h.
• For C++ code, be careful to specify namespaces where needed. Many functions are defined by the standards to be in the std namespace, but g++ puts many such also in the C++ main namespace. One way to do so is to use declarations such as

  using std::floor; 

  but it is usually preferable to use explicit namespace prefixes in the code.

  Examples seen in CRAN packages include

  abs acos atan bind calloc ceil div exp fabs floor fmod free log malloc memcpy memset pow printf qsort round sin sprintf sqrt strcmp strcpy strerror strlen strncmp strtol tan trunc 

  This problem is less common than it used to be, but in 2019 LLVM clang did not have bind in the main namespace. Also seen has been type size_t defined only in the std namespace.

  NB: These functions are only guaranteed to be in the std namespace if the correct C++ header is included, e.g. <cmath> rather than <math.h>.

  If you define functions in C++ which are inspired by later standards, put them in a namespace and refer to them using the namespace. We have seen conflicts with std::make_unique from C++14 and std::byte, std::data, std::sample and std::size from C++17.

• In C++ code

  using namespace std; 

  is not good practice, and has caused platform-dependent errors if included before headers, especially system headers (which may be included by other headers). The best practice is to use explicit std:: prefixes for all functions declared by the C++ standard to be in that namespace. It is an error to use using namespace std before including any C++ headers, and some recent compilers will warn if this is done.

• Some C++ compilers refuse to compile constructs such as

   if(ptr > 0) { ....} 

  which compares a pointer to the integer 0. This could just use if(ptr) (pointer addresses cannot be negative) but if needed pointers can be tested against nullptr (C++11) or NULL.

• Macros defined by the compiler/OS can cause problems. Identifiers starting with an underscore followed by an upper-case letter or another underscore are reserved for system macros and should not be used in portable code (including not as guards in C/C++ headers). Other macros, typically upper-case, may be defined by the compiler or system headers and can cause problems. Some of these can be avoided by defining _POSIX_C_SOURCE before including any system headers, but it is better to only use all-upper-case names which have a unique prefix such as the package name.
• typedefs in OS headers can conflict with those in the package: examples have included ulong, index_t, single and thread. (Note that these may conflict with other uses as identifiers, e.g. defining a C++ function called single.) The POSIX standard reserves (in §2.2.2) all identifiers ending in _t.
• Some compilers do not allow a space between -D and the macro to be defined. Similarly for -U.
• If you use OpenMP, check carefully that you have followed the advice in the subsection on OpenMP support. In particular, any use of OpenMP in C/C++ code will need to use

  #ifdef _OPENMP # include <omp.h> #endif 

  Any use of OpenMP functions, e.g. omp_set_num_threads, also needs to be conditioned. To avoid incessant warnings such as

  warning: ignoring #pragma omp parallel [-Wunknown-pragmas] 

  uses of such pragmas should also be conditioned (or commented out if they are used in code in a package not enabling OpenMP on any platform).

  Do not hardcode -lgomp: not only is that specific to the GCC family of compilers, using the correct linker flag often sets up the run-time path to the library.

• Package authors commonly assume things are part of C/C++ when they are not: the most common example is POSIX¹⁰⁶ function strdup. The most common C library on Linux, glibc, will hide the declarations of such extensions unless a ‘feature-test macro’ is defined before (almost) any system header is included. So for strdup you need

  #define _POSIX_C_SOURCE 200809L ... #include <string.h> ... strdup call(s) 

  where the appropriate value can be found by man strdup on Linux. (Use of strncasecmp is similar.)

  However, modes of gcc with ‘GNU EXTENSIONS’ (which are the default, either -std=gnu99 or -std=gnu11) declare enough macros to ensure that missing declarations are rarely seen.

  This applies also to constants such as M_PI and M_LN2, which are part of the X/Open standard: to use these define _XOPEN_SOURCE before including any headers, or include the R header Rmath.h.

• Using alloca portably is tricky: it is neither an ISO C/C++ nor a POSIX function. An adequately portable preamble is

  #ifdef __GNUC__ /* Includes GCC, clang and Intel compilers */ # undef alloca # define alloca(x) __builtin_alloca((x)) #elif defined(__sun) || defined(_AIX) /* this was necessary (and sufficient) for Solaris 10 and AIX 6: */ # include <alloca.h> #endif 

• Compiler writers feel free to implement features from later standards than the one specified, so for example they may implement or warn on C++14/17/20 features when C++11 is specified. Portable code will not use such features – it can be hard to know what they are but the most common warnings are

  'register' storage class specifier is deprecated and incompatible with C++17 ISO C++11 does not allow conversion from string literal to 'char *' 

  (where conversion should be to const char *). Keyword register was not mentioned in C++98, deprecated in C++11 and removed in C++17.

  There are quite a lot of other C++98 features deprecated in C++11 and removed in C++17, and LLVM clang 9 and later warn about them (and as from version 16 they have been removed). Examples include bind1st/bind2nd (use std::bind or lambdas¹⁰⁷) std::auto_ptr (replaced by std::unique_ptr), std::mem_fun_ref and std::ptr_fun.

• Later versions of standards may add reserved words: for example bool, false and true became keywords in C23 and are no longer available as variable names. As noted above, C++17 uses byte, data, sample and size.

  So avoid common words and keywords from other programming languages.

• Be careful about including C headers in C++ code. Issues include
  • Use of the register storage class specifier (see the previous but one item).
  • The C99 keyword restrict is not part of¹⁰⁸ any C++ standard and is rejected by some C++ compilers.
  • Inclusion by such headers of C-style headers such as math.h (see above).

  The most portable way to interface to other software with a C API is to use C code (which can normally be mixed with C++ code in a package).

• Include only what is essential in extern "C" {} blocks in C++ code. In particular it is not portable to include R headers in such blocks (although they are themselves C code, they may include C++ system headers and the public ones already enclose their declarations in such a block). And maintainers have include R headers from other headers included in such a block.
• reinterpret_cast in C++ is not safe for pointers: for example the types may have different alignment requirements. Use memcpy to copy the contents to a fresh variable of the destination type.
• Avoid platform-specific code if at all possible, but if you need to test for a platform ensure that all platforms are covered. For example, __unix__ is not defined on all Unix-alikes, in particular not on macOS. A reasonably portable way to condition code for a Unix-alike is

  #if defined (__unix__) || (defined (__APPLE__) && defined (__MACH__)) #endif 

  but

  #ifdef _WIN32 // Windows-specific code # if defined(_M_ARM64) || defined(__aarch64__) // for ARM # else // for Intel # endif #else // Unix-alike code #endif 

  would be better. For a Unix-alike it is much better to use configure to test for the functionality needed than make assumptions about OSes (and people all too frequently forget R is used on platforms other than Linux, Windows and macOS — and some forget macOS).

• Headers in subdirectories are often not portable. For C++, this includes bits/, tr1/ and tr2/, none of which exist on macOS (and ext/ exists there but with different content from g++-based platforms). Header bits/stdc++.h is both not portable and not recommended for end-user code even on platforms which include it.
• Be careful if using malloc or calloc. First, their return value must always be checked to see if the allocation succeeded – it is almost always easier to use R’s R_Calloc, which does check. Second, the first argument is of type size_t¹⁰⁹ and some recent compilers warn about passing int (signed) arguments (which could get promoted to ridiculously large values).
• For C code, consider using the flag -Wstrict-prototypes which is supported by gcc and LLVM and Apple clang. This has found quite a number of errors where functions have been declared without arguments and is likely to become the default in future compilers. (It already is for Apple clang and for LLVM clang in C23 mode.) Note that using f() for a function without any parameters was deprecated in C99 and C11, but it became non-deprecated in C23. However, f(void) is supported by all standards and avoids any uncertainty.

  LLVM clang has a separate warning -Wdeprecated-non-prototype which is enabled by -Wstrict-prototypes. This warns on K&R-style usage, which will not be accepted in C23.

• Several C entry points are warned against in their man pages on most systems, often in very strong terms such as ’Do not use these functions’. macOS has started to warn¹¹⁰ if these are used for sprintf, vsprintf, gets, mktemp, tempmam and tmpnam. It is highly recommended that you use safer alternatives (on any platform) but the warning can be avoided by defining ‘_POSIX_C_SOURCE’ to for example ‘200809L’ before including the (C or C++) header which defines them. (However, this may hide other extensions.)
• Compilers may interpret comments in source code, so it is necessary to remove any intended for a compiler to interpret. The main example has been comments for Visual Fortran (as the Intel Fortran compiler has been known on Windows¹¹¹) like

  !DEC$ ATTRIBUTES DLLEXPORT,C,REFERENCE,ALIAS:'kdenestmlcvb' :: kdenestmlcvb 

  which are interpreted by Intel Fortran on all platforms (and are inappropriate for use with R on Windows). gfortran has similar forms starting with !GCC$.

• The C++ new operator takes argument std::size_t size, which is unsigned. Using a signed integer type such as int may lead to compiler warnings such as

  warning: argument 1 value '18446744073709551615' exceeds maximum object size 9223372036854775807 [-Walloc-size-larger-than=] 

  (especially if LTO is used). So don’t do that!

• Some authors feel the need to print (using Rprintf or similar) vector lengths or indices which are of type R_xlen_t. That is (almost always) a 64-bit type but which integer type it is mapped to is platform-specific. The safest way is to cast the length to double and use a double format. So one could use something like

   SEXP Robj; R_xlen_t nelem; Rf_error("Actual: %0.f; Expected %0.f\n", (double) XLENGTH(Robj), (double) nelem); 

  (This could print to full precision, lengths well beyond the address space limits of current OSes, let alone practical limits.)

  If you do want to use an integer format, be aware that R_xlen_t is implemented by the int, long or long long type on current platforms and even on 64-bit ones need not be the same type as int64_t. So the values will need to be cast to the type assumed by the format (and %lld was not supported on Windows until R 4.2.0).

• Variadic macros in C or C++ only portably allow a non-zero number of arguments, although some compilers have allowed zero, often with a warning. The latter was standardized in C++20 using the __VA_OPT__ macro. C23 allows zero arguments in a similar way.

Some additional information for C++ is available at https://journal.r-project.org/archive/2011-2/RJournal_2011-2_Plummer.pdf by Martyn Plummer.

Several OSes have or currently do provide multiple C++ runtimes — Solaris did and the LLVM clang compiler has a native C++ runtime library libc++ but is also used with GCC’s libstdc++ (by default on Debian/Ubuntu/Fedora). This makes it unsafe to assume that OS libraries with a C++ interface are compatible with the C++ compiler specified by R. Many of these system libraries also have C interfaces which should be used in preference to their C++ interface. Otherwise it is essential that a package checks compatibility in its configure script, including that C++ code using the library can both be linked and loaded.

• Common symbols
• C++17 issues
• C23 changes

#define extern # include "globals.h" #undef extern 

-D_HAS_AUTO_PTR_ETC=0 

std::auto_ptr std::unary_function std::binary_function std::random_shuffle std::binder1st std::binder2nd 

BOOST_MPL_AUX_STATIC_CAST(AUX_WRAPPER_VALUE_TYPE, (value - 1)); 

 -Wno-error=enum-constexpr-conversion 

CXX="/path/to/clang/clang++ -std=gnu++17 -stdlib=libc++" 

1.6.5 Portable Fortran code ¶

For many years almost all known R platforms used gfortran as their Fortran compiler, but now there are LLVM and ‘classic’ flang and the Intel compilers ifort¹¹⁶ and ifx are now free-of-change.

There is still a lot of Fortran code in CRAN packages which predates Fortran 77. Modern Fortran compilers are being written to target a minimum standard of Fortran 2018. and it is desirable that Fortran code in packages complies with that standard. For gfortran this can be checked by adding -std=f2018 to FFLAGS. The most commonly seen issues are

• The use of DFLOAT, which was superseded by DBLE in Fortran 77. Also, use of DCMPLX, DCONJG, DIMAG and similar.
• Use of what gfortran calls ‘Fortran 2018 deleted features’, although most were ‘deleted’ in earlier standards: those itemized here were deleted in Fortran 2008. (In the Fortran standards ‘deleted’ means features that compilers are not required to implement.) These include
  • Arithmetic IF statements.
  • DO loops which are not terminated with a END DO or CONTINUE statement. (Unlabelled DO loops terminated by END DO are preferred for readability.)
  • Labelled DO loops sharing a terminating CONTINUE statement.
• The use of GNU Fortran extensions. Some are listed at https://gcc.gnu.org/onlinedocs/gfortran/Extensions-implemented-in-GNU-Fortran.html. Others which have caused problems include etime, getpid, isnan¹¹⁷ and sizeof.

  One that frequently catches package writers is that it allows out-of-order declarations: in standard-conformant Fortran variables must be declared (explicitly or implicitly) before use in other declarations such as dimensions.

Unfortunately this flags extensions such as DOUBLE COMPLEX and COMPLEX*16. R has tested that DOUBLE COMPLEX works and so is preferred to COMPLEX*16. (One can also use something like COMPLEX(KIND=KIND(0.0D0)).)

GNU Fortran 10 and later give a compilation error for the previously widespread practice of passing a Fortran array element where an array is expected, or a scalar instead of a length-one array. See https://gcc.gnu.org/gcc-10/porting_to.html. As do the Intel Fortran compilers, and they can be stricter.

The use of IMPLICIT NONE is highly recommended – Intel compilers with -warn will warn on variables without an explicit type.

Common non-portable constructions include

• The use of Fortran types such as REAL(KIND=8) is very far from portable. According to the standards this merely enumerates different supported types, so DOUBLE PRECISION might be REAL(KIND=3) (and is on an actual compiler). Even if for a particular compiler the value indicates the size in bytes, which values are supported is platform-specific — for example gfortran supports values of 4 and 8 on all current platforms and 10 and 16 on a few (but not for example on all ‘arm’ CPUs).

  The same applies to INTEGER(KIND=4) and COMPLEX(KIND=16).

  Many uses of integer and real variable in Fortran code in packages will interwork with C (for example .Fortran is written in C), and R has checked that INTEGER and DOUBLE PRECISION correspond to the C types int and double. To make this explicit, from Fortran 2003 one can use the named constants c_int, c_double and c_double_complex from module iso_c_binding.

• The Intel compilers only recognize the extensions .f (fixed-form) and .f90 (free-form) and not .f95. R CMD INSTALL works around this for packages without a src/Makefile.
• Use of extensions .F and .F90 to indicate source code to be preprocessed: the preprocessor used is compiler-specific and may or may not be cpp. Compilers may even preprocess files with extension .f or .f90 (Intel does).
• Fixed form Fortran (with extension .f) should only use 72 columns, and free-form at most 132 columns. This includes trailing comments. Over-long lines may be silently truncated or give a warning.
• Tabs are not part of the Fortran character set: compilers tend to accept them but how they are interpreted is compiler-specific.
• Fortran-66-style Hollerith constants.

As well as ‘deleted features’, Fortran standards have ‘obsolescent features’. These are similar to ‘deprecated’ in other languages, but the Fortran standards committee has said it will only move them to ‘deleted’ status when they are no longer much used. These include

• ENTRY statements.
• FORALL statements.
• Labelled DO statements.
• COMMON and EQUIVALENCE statements, and BLOCK DATA units.
• Computed GOTO statements, replaced by SELECT CASE.
• Statement functions.
• DATA statements after executable statements.
• Specific (rather than generic) names for intrinsic functions.

gfortran with option -std=f2018 will warn about these: R will report only in the installation log.

1.6.6 Binary distribution ¶

If you want to distribute a binary version of a package on Windows or macOS, there are further checks you need to do to check it is portable: it is all too easy to depend on external software on your own machine that other users will not have.

For Windows, check what other DLLs your package’s DLL depends on (‘imports’ from in the DLL tools’ parlance). A convenient GUI-based tool to do so is ‘Dependency Walker’ (https://www.dependencywalker.com/) for both 32-bit and 64-bit DLLs – note that this will report as missing links to R’s own DLLs such as R.dll and Rblas.dll. The command-line tool objdump in the appropriate toolchain will also reveal what DLLs are imported from. If you use a toolchain other than one provided by the R developers or use your own makefiles, watch out in particular for dependencies on the toolchain’s runtime DLLs such as libgfortran, libstdc++ and libgcc_s.

For macOS, using R CMD otool -L on the package’s shared object(s) in the libs directory will show what they depend on: watch for any dependencies in /usr/local/lib or /usr/local/gfortran/lib, notably libgfortran.?.dylib and libquadmath.0.dylib. (For ways to fix these, see Building binary packages in R Installation and Administration.)

Many people (including the CRAN package repository) will not accept source packages containing binary files as the latter are a security risk. If you want to distribute a source package which needs external software on Windows or macOS, options include

• To arrange for installation of the package to download the additional software from a URL, as e.g. package Cairo used to.
• To negotiate with Tomas Kalibera to include Windows software in Rtools or with Simon Urbanek to include macOS software in his ‘recipes’ system.
• (For CRAN.) To negotiate with Uwe Ligges to host the additional components on WinBuilder, and write a configure.win file to install them.

Be aware that license requirements may require you to supply the sources for the additional components (and will if your package has a GPL-like license).

1.8.1 C-level messages ¶

The process of enabling translations is

• In a header file that will be included in all the C (or C++ or Objective C/C++) files containing messages that should be translated, declare

  #include <R.h> /* to include Rconfig.h */ #ifdef ENABLE_NLS #include <libintl.h> #define _(String) dgettext ("pkg", String) /* replace pkg as appropriate */ #else #define _(String) (String) #endif 

• For each message that should be translated, wrap it in _(...), for example

  error(_("'ord' must be a positive integer")); 

  If you want to use different messages for singular and plural forms, you need to add

  #ifndef ENABLE_NLS #define dngettext(pkg, String, StringP, N) (N == 1 ? String : StringP) #endif 

  and mark strings by

  dngettext("pkg", <singular string>, <plural string>, n) 

• In the package’s src directory run

  xgettext --keyword=_ -o pkg.pot *.c 

The file src/pkg.pot is the template file, and conventionally this is shipped as po/pkg.pot.

1.8.2 R messages ¶

Mechanisms are also available to support the automatic translation of R stop, warning and message messages. They make use of message catalogs in the same way as C-level messages, but using domain R-pkg rather than pkg. Translation of character strings inside stop, warning and message calls is automatically enabled, as well as other messages enclosed in calls to gettext or gettextf. (To suppress this, use argument domain=NA.)

Tools to prepare the R-pkg.pot file are provided in package tools: xgettext2pot will prepare a file from all strings occurring inside gettext/gettextf, stop, warning and message calls. Some of these are likely to be spurious and so the file is likely to need manual editing. xgettext extracts the actual calls and so is more useful when tidying up error messages.

The R function ngettext provides an interface to the C function of the same name: see example in the previous section. It is safest to use domain="R-pkg" explicitly in calls to ngettext, and necessary for earlier versions of R unless they are calls directly from a function in the package.

1.8.3 Preparing translations ¶

Once the template files have been created, translations can be made. Conventional translations have file extension .po and are placed in the po subdirectory of the package with a name that is either ‘ll.po’ or ‘R-ll.po’ for translations of the C and R messages respectively to language with code ‘ll’.

See Localization of messages in R Installation and Administration for details of language codes.

There is an R function, update_pkg_po in package tools, to automate much of the maintenance of message translations. See its help for what it does in detail.

If this is called on a package with no existing translations, it creates the directory pkgdir/po, creates a template file of R messages, pkgdir/po/R-pkg.pot, within it, creates the ‘en@quot’ translation and installs that. (The ‘en@quot’ pseudo-language interprets quotes in their directional forms in suitable (e.g. UTF-8) locales.)

If the package has C source files in its src directory that are marked for translation, use

touch pkgdir/po/pkg.pot 

to create a dummy template file, then call update_pkg_po again (this can also be done before it is called for the first time).

When translations to new languages are added in the pkgdir/po directory, running the same command will check and then install the translations.

If the package sources are updated, the same command will update the template files, merge the changes into the translation .po files and then installed the updated translations. You will often see that merging marks translations as ‘fuzzy’ and this is reported in the coverage statistics. As fuzzy translations are not used, this is an indication that the translation files need human attention.

The merged translations are run through tools::checkPofile to check that C-style formats are used correctly: if not the mismatches are reported and the broken translations are not installed.

This function needs the GNU gettext-tools installed and on the path: see its help page.

1.10.1 Frontend ¶

This is a rather general mechanism, designed for adding new front-ends such as the former gnomeGUI package (see the Archive area on CRAN). If a configure file is found in the top-level directory of the package it is executed, and then if a Makefile is found (often generated by configure), make is called. If R CMD INSTALL --clean is used make clean is called. No other action is taken.

R CMD build can package up this type of extension, but R CMD check will check the type and skip it.

Many packages of this type need write permission for the R installation directory.

2.1.1 Documenting functions ¶

The basic markup commands used for documenting R objects (in particular, functions) are given in this subsection.

\name{name} ¶

name typically¹¹⁹ is the basename of the Rd file containing the documentation. It is the “name” of the Rd object represented by the file and has to be unique in a package. To avoid problems with indexing the package manual, it may not contain ‘!’ ‘|’ nor ‘@’. (LaTeX special characters are allowed, but may not be collated correctly in the index.) There can only be one \name entry in a file, and it must not contain any markup and should only contain printable ASCII characters. Entries in the package manual will be in alphabetic¹²⁰ order of the \name entries.

\alias{topic} ¶

The \alias sections specify all “topics” the file documents. This information is collected into index data bases for lookup by the on-line (plain text and HTML) help systems. The topic can contain spaces, but (for historical reasons) leading and trailing spaces will be stripped. Percent and left brace need to be escaped by a backslash.

There may be several \alias entries. Quite often it is convenient to document several R objects in one file. For example, file Normal.Rd documents the density, distribution function, quantile function and generation of random variates for the normal distribution, and hence starts with

\name{Normal} \alias{Normal} \alias{dnorm} \alias{pnorm} \alias{qnorm} \alias{rnorm} 

Also, it is often convenient to have several different ways to refer to an R object, and an \alias does not need to be the name of an object.

Note that the \name is not necessarily a topic documented, and if so desired it needs to have an explicit \alias entry (as in this example).

\title{Title} ¶

Title information for the Rd file. This should be capitalized and not end in a period; try to limit its length to at most 65 characters for widest compatibility.

Markup is supported in the text, but use of characters other than English text and punctuation (e.g., ‘<’) may limit portability.

There must be one (and only one) \title section in a help file.

\description{…} ¶

A short description of what the function(s) do(es) (one paragraph, a few lines only). (If a description is too long and cannot easily be shortened, the file probably tries to document too much at once.) This is mandatory except for package-overview files.

\usage{fun(arg1, arg2, …)} ¶

One or more lines showing the synopsis of the function(s) and variables documented in the file. These are set in typewriter font. This is an R-like command.

The usage information specified should match the function definition exactly (such that automatic checking for consistency between code and documentation is possible).

To indicate that a function can be used in several different ways, depending on the named arguments specified, use section \details. E.g., abline.Rd contains

\details{ Typical usages are \preformatted{abline(a, b, ...) ...... } 

Use \method{generic}{class} to indicate the name of an S3 method for the generic function generic for objects inheriting from class "class". In the printed versions, this will come out as generic (reflecting the understanding that methods should not be invoked directly but via method dispatch), but codoc() and other QC tools always have access to the full name.

For example, print.ts.Rd contains

\usage{ \method{print}{ts}(x, calendar, \dots) } 

which will print as

Usage: ## S3 method for class 'ts': print(x, calendar, ...) 

Usage for replacement functions should be given in the style of dim(x) <- value rather than explicitly indicating the name of the replacement function ("dim<-" in the above). Similarly, one can use \method{generic}{class}(arglist) <- value to indicate the usage of an S3 replacement method for the generic replacement function "generic<-" for objects inheriting from class "class".

Usage for S3 methods for extracting or replacing parts of an object, S3 methods for members of the Ops group, and S3 methods for user-defined (binary) infix operators (‘%xxx%’) follows the above rules, using the appropriate function names. E.g., Extract.factor.Rd contains

\usage{ \method{[}{factor}(x, \dots, drop = FALSE) \method{[[}{factor}(x, \dots) \method{[}{factor}(x, \dots) <- value } 

which will print as

Usage: ## S3 method for class 'factor': x[..., drop = FALSE] ## S3 method for class 'factor': x[[...]] ## S3 replacement method for class 'factor': x[...] <- value 

\S3method is accepted as an alternative to \method.

\arguments{…} ¶

Description of the function’s arguments, using an entry of the form

\item{arg_i}{Description of arg_i.} 

for each element of the argument list. (Note that there is no whitespace between the three parts of the entry.) Arguments can also be described jointly by separating their names with commas (and optional whitespace) in the \item label. There may be optional text outside the \item entries, for example to give general information about groups of parameters.

\details{…} ¶

A detailed if possible precise description of the functionality provided, extending the basic information in the \description slot.

\value{…} ¶

Description of the function’s return value.

If a list with multiple values is returned, you can use entries of the form

\item{comp_i}{Description of comp_i.} 

for each component of the list returned. There may be optional text outside the \item entries (see for example the joint help for rle and inverse.rle, or the sets of items in l10n_info). Note that \value is implicitly a \describe environment, so that environment should not be used for listing components, just individual \item{}{} entries.¹²¹

\references{…} ¶

A section with references to the literature. Use \url{} or \href{}{} for web pointers, and \doi{} for DOIs (this needs R >= 3.3, see User-defined macros for more info).

\note{...} ¶

Use this for a special note you want to have pointed out. Multiple \note sections are allowed, but might be confusing to the end users.

For example, pie.Rd contains

\note{ Pie charts are a very bad way of displaying information. The eye is good at judging linear measures and bad at judging relative areas. ...... } 

\author{…} ¶

Information about the author(s) of the Rd file. Use \email{} without extra delimiters (such as ‘( )’ or ‘< >’) to specify email addresses, or \url{} or \href{}{} for web pointers.

\seealso{…} ¶

Pointers to related R objects, using \code{\link{...}} to refer to them (\code is the correct markup for R object names, and \link produces hyperlinks in output formats which support this. See Marking text, and Cross-references).

\examples{…} ¶

Examples of how to use the function. Code in this section is set in typewriter font without reformatting and is run by example() unless marked otherwise (see below).

Examples are not only useful for documentation purposes, but also provide test code used for diagnostic checking of R code. By default, text inside \examples{} will be displayed in the output of the help page and run by example() and by R CMD check. You can use \dontrun{} for text that should only be shown, but not run, and \dontshow{} for extra commands for testing that should not be shown to users, but will be run by example(). (Previously this was called \testonly, and that is still accepted.)

Text inside \dontrun{} is ‘verbatim’, but the other parts of the \examples section are R-like text.

For example,

x <- runif(10) # Shown and run. \dontrun{plot(x)} # Only shown. \dontshow{log(x)} # Only run. 

Thus, example code not included in \dontrun must be executable! In addition, it should not use any system-specific features or require special facilities (such as Internet access or write permission to specific directories). Text included in \dontrun is indicated by comments in the processed help files: it need not be valid R code but the escapes must still be used for %, \ and unpaired braces as in other ‘verbatim’ text.

Example code must be capable of being run by example, which uses source. This means that it should not access stdin, e.g. to scan() data from the example file.

Data needed for making the examples executable can be obtained by random number generation (for example, x <- rnorm(100)), or by using standard data sets listed by data() (see ?data for more info).

Finally, there is \donttest, used (at the beginning of a separate line) to mark code that should be run by example() but not by R CMD check (by default: the option --run-donttest can be used). This should be needed only occasionally but can be used for code which might fail in circumstances that are hard to test for, for example in some locales. (Use e.g. capabilities() or nzchar(Sys.which("someprogram")) to test for features needed in the examples wherever possible, and you can also use try() or tryCatch(). Use interactive() to condition examples which need someone to interact with.) Note that code included in \donttest must be correct R code, and any packages used should be declared in the DESCRIPTION file. It is good practice to include a comment in the \donttest section explaining why it is needed.

Output from code marked with \dontdiff (requires R >= 4.4.0) or between comment lines

## IGNORE_RDIFF_BEGIN ## IGNORE_RDIFF_END 

is ignored when comparing check output to reference output (a pkg-Ex.Rout.save file). The comment-based markup can also be used for scripts under tests.

\keyword{key} ¶

There can be zero or more \keyword sections per file. Each \keyword section should specify a single keyword, preferably one of the standard keywords as listed in file KEYWORDS in the R documentation directory (default R_HOME/doc). Use e.g. RShowDoc("KEYWORDS") to inspect the standard keywords from within R. There can be more than one \keyword entry if the R object being documented falls into more than one category, or none.

Do strongly consider using \concept (see Indices) instead of \keyword if you are about to use more than very few non-standard keywords.

The special keyword ‘internal’ marks a page of internal topics (typically, objects that are not part of the package’s API). If the help page for topic foo has keyword ‘internal’, then help(foo) gives this help page, but foo is excluded from several topic indices, including the alphabetical list of topics in the HTML help system.

help.search() can search by keyword, including user-defined values: however the ‘Search Engine & Keywords’ HTML page accessed via help.start() provides single-click access only to a pre-defined list of keywords.

2.1.2 Documenting data sets ¶

The structure of Rd files which document R data sets is slightly different. Sections such as \arguments and \value are not needed but the format and source of the data should be explained.

As an example, let us look at src/library/datasets/man/rivers.Rd which documents the standard R data set rivers.

\name{rivers} \docType{data} \alias{rivers} \title{Lengths of Major North American Rivers} \description{ This data set gives the lengths (in miles) of 141 \dQuote{major} rivers in North America, as compiled by the US Geological Survey. } \usage{rivers} \format{A vector containing 141 observations.} \source{World Almanac and Book of Facts, 1975, page 406.} \references{ McNeil, D. R. (1977) \emph{Interactive Data Analysis}. New York: Wiley. } \keyword{datasets}

This uses the following additional markup commands.

\docType{…}

Indicates the “type” of the documentation object. Always ‘data’ for data sets, and ‘package’ for pkg-package.Rd overview files. Documentation for S4 methods and classes uses ‘methods’ (from promptMethods()) and ‘class’ (from promptClass()).

\format{…} ¶

A description of the format of the data set (as a vector, matrix, data frame, time series, …). For matrices and data frames this should give a description of each column, preferably as a list or table. See Lists and tables, for more information.

\source{…} ¶

Details of the original source (a reference or URL, see Specifying URLs). In addition, section \references could give secondary sources and usages.

Note also that when documenting data set bar,

• The \usage entry is always bar or (for packages which do not use lazy-loading of data) data(bar). (In particular, only document a single data object per Rd file.)
• The \keyword entry should always be ‘datasets’.

If bar is a data frame, documenting it as a data set can be initiated via prompt(bar). Otherwise, the promptData function may be used.

2.1.3 Documenting S4 classes and methods ¶

There are special ways to use the ‘?’ operator, namely ‘class?topic’ and ‘methods?topic’, to access documentation for S4 classes and methods, respectively. This mechanism depends on conventions for the topic names used in \alias entries. The topic names for S4 classes and methods respectively are of the form

class-class generic,signature_list-method 

where signature_list contains the names of the classes in the signature of the method (without quotes) separated by ‘,’ (without whitespace), with ‘ANY’ used for arguments without an explicit specification. E.g., ‘genericFunction-class’ is the topic name for documentation for the S4 class "genericFunction", and ‘coerce,ANY,NULL-method’ is the topic name for documentation for the S4 method for coerce for signature c("ANY", "NULL").

Skeletons of documentation for S4 classes and methods can be generated by using the functions promptClass() and promptMethods() from package methods. If it is necessary or desired to provide an explicit function declaration (in a \usage section) for an S4 method (e.g., if it has “surprising arguments” to be mentioned explicitly), one can use the special markup

\S4method{generic}{signature_list}(argument_list) 

(e.g., ‘\S4method{coerce}{ANY,NULL}(from, to)’).

To make full use of the potential of the on-line documentation system, all user-visible S4 classes and methods in a package should at least have a suitable \alias entry in one of the package’s Rd files. If a package has methods for a function defined originally somewhere else, and does not change the underlying default method for the function, the package is responsible for documenting the methods it creates, but not for the function itself or the default method.

An S4 replacement method is documented in the same way as an S3 one: see the description of \method in Documenting functions.

See help("Documentation", package = "methods") for more information on using and creating on-line documentation for S4 classes and methods.

2.1.4 Documenting packages ¶

Packages may have an overview help page with an \alias pkgname-package, e.g. ‘utils-package’ for the utils package, when package?pkgname will open that help page. If a topic named pkgname does not exist in another Rd file, it is helpful to use this as an additional \alias.

Skeletons of documentation for a package can be generated using the function promptPackage(). If the final = TRUE argument is used, then the Rd file will be generated in final form, containing only basic information from the DESCRIPTION file. Otherwise (the default) comments will be inserted giving suggestions for content.

Apart from the mandatory \name and \title and the pkgname-package alias, the only requirement for the package overview page is that it include a \docType{package} statement. All other content is optional. We suggest that it should be a short overview, to give a reader unfamiliar with the package enough information to get started. More extensive documentation is better placed into a package vignette (see Writing package vignettes) and referenced from this page, or into individual man pages for the functions, datasets, or classes.

3.3.1 Memory statistics from Rprof ¶

The sampling profiler Rprof described in the previous section can be given the option memory.profiling=TRUE. It then writes out the total R memory allocation in small vectors, large vectors, and cons cells or nodes at each sampling interval. It also writes out the number of calls to the internal function Rf_duplicate, which is called to copy R objects. summaryRprof provides summaries of this information. The main reason that this can be misleading is that the memory use is attributed to the function running at the end of the sampling interval. A second reason is that garbage collection can make the amount of memory in use decrease, so a function appears to use little memory. Running under gctorture helps with both problems: it slows down the code to effectively increase the sampling frequency and it makes each garbage collection release a smaller amount of memory.

3.3.2 Tracking memory allocations ¶

The second method of memory profiling uses a memory-allocation profiler, Rprofmem(), which writes out a stack trace to an output file every time a large vector is allocated (with a user-specified threshold for ‘large’) or a new page of memory is allocated for the R heap. Summary functions for this output are still being designed.

Running the example from the previous section with

> Rprofmem("boot.memprof",threshold=1000) > storm.boot <- boot(rs, storm.bf, R = 4999) > Rprofmem(NULL) 

shows that apart from some initial and final work in boot there are no vector allocations over 1000 bytes.

3.3.3 Tracing copies of an object ¶

The third method of memory profiling involves tracing copies made of a specific (presumably large) R object. Calling tracemem on an object marks it so that a message is printed to standard output when the object is copied via Rf_duplicate or coercion to another type, or when a new object of the same size is created in arithmetic operations. The main reason that this can be misleading is that copying of subsets or components of an object is not tracked. It may be helpful to use tracemem on these components.

In the example above we can run tracemem on the data frame st

> tracemem(st) [1] "<0x9abd5e0>" > storm.boot <- boot(rs, storm.bf, R = 4) memtrace[0x9abd5e0->0x92a6d08]: statistic boot memtrace[0x92a6d08->0x92a6d80]: $<-.data.frame $<- statistic boot memtrace[0x92a6d80->0x92a6df8]: $<-.data.frame $<- statistic boot memtrace[0x9abd5e0->0x9271318]: statistic boot memtrace[0x9271318->0x9271390]: $<-.data.frame $<- statistic boot memtrace[0x9271390->0x9271408]: $<-.data.frame $<- statistic boot memtrace[0x9abd5e0->0x914f558]: statistic boot memtrace[0x914f558->0x914f5f8]: $<-.data.frame $<- statistic boot memtrace[0x914f5f8->0x914f670]: $<-.data.frame $<- statistic boot memtrace[0x9abd5e0->0x972cbf0]: statistic boot memtrace[0x972cbf0->0x972cc68]: $<-.data.frame $<- statistic boot memtrace[0x972cc68->0x972cd08]: $<-.data.frame $<- statistic boot memtrace[0x9abd5e0->0x98ead98]: statistic boot memtrace[0x98ead98->0x98eae10]: $<-.data.frame $<- statistic boot memtrace[0x98eae10->0x98eae88]: $<-.data.frame $<- statistic boot 

The object is duplicated fifteen times, three times for each of the R+1 calls to storm.bf. This is surprising, since none of the duplications happen inside nls. Stepping through storm.bf in the debugger shows that all three happen in the line

st$Time <- st$fit + rs[i] 

Data frames are slower than matrices and this is an example of why. Using tracemem(st$Viscosity) does not reveal any additional copying.

3.4.1 Profiling on Linux ¶

Options include using sprof for a shared object, and oprofile (see https://oprofile.sourceforge.io/news/) and perf (see https://perfwiki.github.io/) for any executable or shared object. These seem less widely supplied than they used to be. There is also ‘Google Performance Tools’, also known as gperftools or google-perftools.

All of these work best when R and any packages have been built with debugging symbols.

• perf
• oprofile and operf
• sprof

perf record R -f tests/Examples/stats-Ex.R perf report --sort=dso perf report --sort=srcfile rm perf.data* 

 75.67% R 9.25% libc.so.6 4.87% [unknown] 3.75% libz.so.1.2.11 3.37% stats.so 1.17% libm.so.6 0.63% libtirpc.so.3.0.0 0.41% graphics.so 0.30% grDevices.so 0.20% libRblas.so 0.09% libpcre2-8.so.0.11.0 0.07% methods.so ... 

operf R -f boot.R opreport opreport -l /path/to/R_HOME/bin/exec/R opreport -l /path/to/R_HOME/library/stats/src/stats.so opannotate --source /path/to/R_HOME/bin/exec/R 

 CPU_CLK_UNHALT...| samples| %| ------------------ 278341 91.9947 R 18290 6.0450 libc.so.6 2277 0.7526 kallsyms 1426 0.4713 stats.so 739 0.2442 libRblas.so 554 0.1831 libz.so.1.2.11 373 0.1233 libm.so.6 352 0.1163 libtirpc.so.3.0.0 153 0.0506 ld-linux-x86-64.so.2 12 0.0040 methods.so 

samples % image name symbol name 52955 19.0574 R bcEval.lto_priv.0 16484 5.9322 R Rf_allocVector3 14224 5.1189 R Rf_findVarInFrame3 12581 4.5276 R CONS_NR 8289 2.9830 R Rf_matchArgs_NR 8034 2.8913 R Rf_cons 7114 2.5602 R R_gc_internal.lto_priv.0 6552 2.3579 R Rf_eval 5969 2.1481 R VECTOR_ELT 5684 2.0456 R Rf_applyClosure 5497 1.9783 R findVarLocInFrame.part.0.lto_priv.0 4827 1.7371 R Rf_mkPROMISE 4609 1.6587 R Rf_install 4317 1.5536 R Rf_findFun3 4035 1.4521 R getvar.lto_priv.0 3491 1.2563 R SETCAR 3179 1.1441 R Rf_defineVar 2892 1.0408 R duplicate1.lto_priv.0 

samples % image name symbol name 285 24.4845 stats.so termsform 284 24.3986 stats.so numeric_deriv 213 18.2990 stats.so modelframe 114 9.7938 stats.so nls_iter 55 4.7251 stats.so ExtractVars 47 4.0378 stats.so EncodeVars 37 3.1787 stats.so getListElement 32 2.7491 stats.so TrimRepeats 25 2.1478 stats.so InstallVar 20 1.7182 stats.so MatchVar 20 1.7182 stats.so isZeroOne 15 1.2887 stats.so ConvInfoMsg.isra.0 

% setenv LD_PROFILE /path/to/R_HOME/library/stats/libs/stats.so % R -f boot.R % sprof /path/to/R_HOME/library/stats/libs/stats.so \ /var/tmp/path/to/R_HOME/library/stats/libs/stats.so.profile Flat profile: Each sample counts as 0.01 seconds. % cumulative self self total time seconds seconds calls us/call us/call name 76.19 0.32 0.32 0 0.00 numeric_deriv 16.67 0.39 0.07 0 0.00 nls_iter 7.14 0.42 0.03 0 0.00 getListElement ... to clean up ... rm /var/tmp/path/to/R_HOME/library/stats/libs/stats.so.profile 

3.4.2 Profiling on macOS ¶

Developers have recommended Instruments (part of Xcode, see https://help.apple.com/instruments/mac/current/), This had a command-line version prior to macOS 12.

3.4.3 Profiling on Windows ¶

Very Sleepy (https://github.com/VerySleepy/verysleepy) has been used on ‘x86_64’ Windows. There were problems with accessing the debug information, but the best results which included function names were obtained by attaching the profiler to an existing Rterm process, either via GUI or using /a: (PID obtained via Sys.getpid()).