DEV Community

Cover image for How to Dual Boot Arch Linux With Windows
Debiprasad Das
Debiprasad Das

Posted on • Edited on

How to Dual Boot Arch Linux With Windows

#linux #archlinux #beginners #windows

First Step:

Create an empty unallocated Empty partition in windows then boot into archiso via a USB drive after flashing it via balenaEtcher,

after entering in TTY change the font if you want a bigger font.

setfont ter-132n
Enter fullscreen mode Exit fullscreen mode

Setup WIFI connection on TTY:

check your internet connection using

ping archlinux.org
Enter fullscreen mode Exit fullscreen mode

if you don't have internet connection then connnect it using iwctl

  • First get your WIFI interface name 
iwctl # Get WIFI interface name: device list # Scan WIFI networks: station <interface_name> scan station <interface_name> get-networks # Finally, to connect to a network: station <interface_name> connect <SSID>
Enter fullscreen mode Exit fullscreen mode

to learn more about iwctl

Partition Disk: 

cfdisk
Enter fullscreen mode Exit fullscreen mode

NOTE : If it's does not show correct partition
then select your drive. you can get drive list by typing lsblk

# example cfdisk /dev/nvme0n1
Enter fullscreen mode Exit fullscreen mode
  • Then select gpt, after entering in GUI.
  • Select "Free space" and select "New" then press Enter.
  • and then Enter the storage space you want to give it to your root and press Enter.

  • and you will see a partition is being created and make sure this partition type is "Linux filesystem".

  • Next select the remaining "Free space" and press Enter, we will give this space to swap partition.

  • Do same as before and then select the swap partition and select "Type" press enter to see all the types available.

  • Select "Linux swap" from them.

  • We don't need to create boot partition as we already has boot efi partition running windows,

  • we just need to mount linux boot partition along side of windows, will do it later.

  • Then select "Write" and confirm it.

  • You will see "parition table has been altered" blue color text.

  • Then select "Quit"

  • type lsblk to see your partitions name.

Format Created Partitions:

  • Format root partition: 
mkfs.ext4 /dev/<root_partition> # for example my root partition name is dev/sda1 # I will do "mkfs.ext4 /dev/sda1"
Enter fullscreen mode Exit fullscreen mode
  • Format swap partition: 
mkswap /dev/<swap_partition> # for example my swap partition name is dev/sda2 # I will do "mkfs.swap /dev/sda2"
Enter fullscreen mode Exit fullscreen mode

Mount Partitions:

  • Mount root partition: 
mount /dev/<root_partition> /mnt # for example my root partition name is dev/sda1 # I will do mount "mount /dev/sda1 /mnt"
Enter fullscreen mode Exit fullscreen mode
  • Mount swap partition: 
swapon /dev/<swap_partition> # for example my swap partition name is dev/sda2 # I will do mount "swapon /dev/sda2"
Enter fullscreen mode Exit fullscreen mode

Now type lsblk and see that both partition has given proper MOUNTPOINTS

Setup Fastest Mirrors: 

cp /etc/pacman.d/mirrorlist /etc/pacman.d/mirrorlist.bak
Enter fullscreen mode Exit fullscreen mode
  • Verify that mirrorlist.bak file is created by 
ls /etc/pacman.d/
Enter fullscreen mode Exit fullscreen mode
  • Setup fastest mirrors from your contry 
reflector --verbose --country '<YourCountry>' -l 5 --sort rate --save /etc/pacman.d/mirrorlist
Enter fullscreen mode Exit fullscreen mode

Install essential packages: 

pacstrap /mnt base linux linux-firmware sof-firmware base-devel grub efibootmgr neovim vim networkmanager dhcpcd
Enter fullscreen mode Exit fullscreen mode

Fstab:

  • Generate Fstab file and copy it to "etc" folder of arch linux system 
genfstab -U /mnt >> /mnt/etc/fstab
Enter fullscreen mode Exit fullscreen mode
  • check if it's correctly copied by typing 
cat /mnt/etc/fstab
Enter fullscreen mode Exit fullscreen mode

Chroot:

  • Let's Chroot into linux system 
arch-chroot /mnt
Enter fullscreen mode Exit fullscreen mode
  • Check your parititions again by typing lsblk.

Root password:

  • Enter your root password by typing 
passwd
Enter fullscreen mode Exit fullscreen mode

Standard User:

  • Create Standard User 
useradd -m <username>
Enter fullscreen mode Exit fullscreen mode
  • Create user password 
passwd <username>
Enter fullscreen mode Exit fullscreen mode
  • Setup user privilages 
usermod -aG wheel,storage,power <username>
Enter fullscreen mode Exit fullscreen mode
  • Edit Sudoers file 
EDITOR=nvim visudo
Enter fullscreen mode Exit fullscreen mode

then remove "#" in this line(Uncomment this line in programming words)

# %wheel ALL=(ALL) ALL
Enter fullscreen mode Exit fullscreen mode

Localization: 

nvim /etc/locale.gen
Enter fullscreen mode Exit fullscreen mode

then remove "#" in this line(Uncomment this line in programming words)

# en_US.UTF-8 UTF-8
Enter fullscreen mode Exit fullscreen mode
  • Generate locale 
locale-gen
Enter fullscreen mode Exit fullscreen mode
  • Create locale config file 
echo LANG=en_US.UTF-8 > /etc/locale.conf
Enter fullscreen mode Exit fullscreen mode
  • Export system language 
export LANG=en_US.UTF-8
Enter fullscreen mode Exit fullscreen mode

Hostname:

  • Create hostname 
echo <hostname> > /etc/hostname
Enter fullscreen mode Exit fullscreen mode
  • Update Hosts file 
nvim /etc/hosts
Enter fullscreen mode Exit fullscreen mode

put this in the file

127.0.0.1 localhost ::1 localhost 127.0.0.1 <hostname>.localdomain localhost
Enter fullscreen mode Exit fullscreen mode

Time:

  • Setup time 
ln -sf /usr/share/zoneinfo/<Region>/<City> /etc/localtime # You can use <tab> key to provide you region and city suggestions
Enter fullscreen mode Exit fullscreen mode

then type this to sync current time

hwclock --systohc
Enter fullscreen mode Exit fullscreen mode

Grub/Bootloader:

  • First Deletermine your EFI partition using lsblk, mostly it will be first one in your primary drive 
mkdir /boot/efi
Enter fullscreen mode Exit fullscreen mode
  • Mount EFI partition to your grub boot partition 
mount /dev/<efi_partition> /boot/efi/
Enter fullscreen mode Exit fullscreen mode
  • Install os-prober 
pacman -S os-prober
Enter fullscreen mode Exit fullscreen mode
  • Do this so grub can detect windows 
nvim /etc/default/grub
Enter fullscreen mode Exit fullscreen mode

then remove "#" in this line(Uncomment this line in programming words)

#GRUB_DISABLE_OS_PROBER=false
Enter fullscreen mode Exit fullscreen mode
  • Finally install grub 
grub-install --target=x86_64-efi --bootloader-id=grub-uefi --recheck
Enter fullscreen mode Exit fullscreen mode
  • Generate grub config 
grub-mkconfig -o /boot/grub/grub.cfg
Enter fullscreen mode Exit fullscreen mode

  • NOTE: It should detect Windows Boot Manager

  • If it's does not shows "Found Windows Boot Manager" follow this

Network Services:

  • Obtain IP addresss of wifi network 
systemctl enable dhcpcd.service
Enter fullscreen mode Exit fullscreen mode
  • This is strictly necessary for autostart wifi on boot and connect to wifi 
systemctl enable NetworkManager.service
Enter fullscreen mode Exit fullscreen mode

Wrapping up:

  • Exit from Chroot. 
exit
Enter fullscreen mode Exit fullscreen mode
  • Then do this to unmount all of the partitions. 
umount -lR /mnt
Enter fullscreen mode Exit fullscreen mode

NOW REBOOT AND REMOVE THE USB DRIVE WHEN SCREEN TURNS BLACK.

Top comments (0)